[Wed May  1 08:18:41 2013] Detection parameters:
  Position = (213.8, 323.5) = 3 13 46.34 -55 0 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.0 +/- 7.0
  Background counts = 3.2
  Rate = 0.003 +/- 0.0009

[Wed May  1 08:18:42 2013] Off-axis axis estimate = 6.40'
[Wed May  1 08:18:59 2013] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:18:59 2013] Initial guess for spatial extent in simple fitting = 9.63"
[Wed May  1 08:18:59 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.019
[Wed May  1 08:18:59 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.63"
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src11.ximg exists
[Wed May  1 08:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src11.csv
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May  1 08:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src11.csv
[Wed May  1 08:18:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May  1 08:18:59 2013] Fit fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed May  1 08:19:10 2013] Spatial fit model total counts = 43.881600, observed total counts = 43.000000
[Wed May  1 08:19:10 2013] Offset between fit and detection position for source 9 = 0.661158 pixels
[Wed May  1 08:19:10 2013] 43.797500 total counts/ 20.007800 bgd. counts: snr = 5.318502
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.661158 pixels
  Position = (214.4, 323.2) = 3 13 46.06 -55 0 34.3
  Extent = 7.3 (4.8-12.1)", rotation angle = 0
  Source counts = 23.8 +/- 6.6
  Background counts = 20.0
  Rate = 0.002 +/- 0.0006
[Wed May  1 08:19:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:10 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:10 2013] Source does appear to be extended
[Wed May  1 08:19:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:19:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 08:19:21 2013] Initial guess for spatial extent in simple fitting = 7.31"
[Wed May  1 08:19:21 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.052
[Wed May  1 08:19:21 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.31"
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src10.ximg exists
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May  1 08:19:22 2013] Fit fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May  1 08:19:22 2013] Fit fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed May  1 08:19:34 2013] Spatial fit model total counts = 44.563900, observed total counts = 43.000000
[Wed May  1 08:19:34 2013] Offset between fit and detection position for source 9 = 0.135297 pixels
[Wed May  1 08:19:34 2013] 44.449600 total counts/ 20.841000 bgd. counts: snr = 5.171434
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.135297 pixels
  Position = (214.3, 323.3) = 3 13 46.10 -55 0 33.8
  Extent = 7.1 (4.8-12.2)", rotation angle = 0
  Source counts = 23.6 +/- 6.7
  Background counts = 20.8
  Rate = 0.002 +/- 0.0006
[Wed May  1 08:19:34 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:34 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:34 2013] Source does appear to be extended
[Wed May  1 08:19:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:40:59 2013] XMMSAS src. selection expression = ellipse(18595.612800, 28077.284400, 423.236412, 423.236412, 0.000000, X, Y)
[Wed May  1 08:40:59 2013] Writing source region out to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src9_src.reg
[Wed May  1 08:40:59 2013] Extracting stamp from image fullrun_mos2_xmm0110970101_pi300-10000_cl_sm2.00.img.gz, (190, 299) - (239, 348)
[Wed May  1 08:40:59 2013] XMMSAS bgd. selection expression = annulus(18595.612800, 28077.284400, 705.394020, 1410.788041, X, Y) && !ellipse(19698.070980, 26521.785600, 284.225608, 284.225608, 0.000000, X, Y)
[Wed May  1 08:40:59 2013] Writing fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src9.gif
[Wed May  1 08:42:51 2013] Mean detx,y = (-5855.96, -4549.82) 
[Wed May  1 08:42:52 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 08:43:04 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 08:43:04 2013] Setting source spectrum file to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May  1 08:43:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May  1 08:48:01 2013] Not generating rmf since there are only 23 counts
[Wed May  1 08:48:01 2013] rmf not generated due to insufficient counts
[Wed May  1 08:48:34 2013] Updating aperture counts using extracted products
[Wed May  1 08:48:34 2013] Total counts from fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 28.00
[Wed May  1 08:48:34 2013] Total counts from fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 66.00
[Wed May  1 08:48:34 2013] Got source and background scale factors 568000.000000, 4521440.000000
[Wed May  1 08:48:34 2013] User source parameters:
  Position = (214.3, 323.3) = 3 13 46.10 -55 0 33.8
  Extent = 7.1 (4.8-12.2)", rotation angle = 0
  Source aperture counts = 19.7 +/- 6.4
  Background aperture counts = 8.3
  Rate = 0.002 +/- 0.0006

[Wed May  1 08:48:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:48:35 2013] Using photon index=1.80, rate=0.0023, arf fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src9.arf
[Wed May  1 08:48:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:48:35 2013] Updating source flux to 3.2e-14
[Wed May  1 08:48:38 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 08:48:39 2013] xmm0110970101/analysis//spectral/fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete