[Wed May  1 08:18:41 2013] Detection parameters:
  Position = (213.7, 168.2) = 3 13 46.60 -55 11 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.0 +/- 11.0
  Background counts = 2.7
  Rate = 0.008 +/- 0.001

[Wed May  1 08:18:42 2013] Off-axis axis estimate = 11.26'
[Wed May  1 08:18:59 2013] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:18:59 2013] Initial guess for spatial extent in simple fitting = 12.06"
[Wed May  1 08:18:59 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.980
[Wed May  1 08:18:59 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.06"
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src5.ximg exists
[Wed May  1 08:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src5.csv
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May  1 08:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src5.csv
[Wed May  1 08:18:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May  1 08:18:59 2013] Fit fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May  1 08:19:10 2013] Spatial fit model total counts = 112.947000, observed total counts = 112.000000
[Wed May  1 08:19:10 2013] Offset between fit and detection position for source 2 = 0.204030 pixels
[Wed May  1 08:19:10 2013] 113.208900 total counts/ 59.541000 bgd. counts: snr = 6.955151
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.204030 pixels
  Position = (213.7, 168.4) = 3 13 46.61 -55 11 47.6
  Extent = 5.7 (4.2-8.2)", rotation angle = 0
  Source counts = 53.7 +/- 10.6
  Background counts = 59.5
  Rate = 0.005 +/- 0.001
[Wed May  1 08:19:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:10 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:10 2013] Source does appear to be extended
[Wed May  1 08:19:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:19:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 08:19:21 2013] Initial guess for spatial extent in simple fitting = 5.74"
[Wed May  1 08:19:21 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.906
[Wed May  1 08:19:21 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 5.74"
[Wed May  1 08:19:21 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src5.ximg exists
[Wed May  1 08:19:21 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May  1 08:19:21 2013] Fit fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May  1 08:19:22 2013] Fit fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed May  1 08:19:34 2013] Spatial fit model total counts = 107.968000, observed total counts = 108.000000
[Wed May  1 08:19:34 2013] Offset between fit and detection position for source 2 = 0.068245 pixels
[Wed May  1 08:19:34 2013] 107.118700 total counts/ 52.570300 bgd. counts: snr = 7.523359
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.068245 pixels
  Position = (213.7, 168.4) = 3 13 46.58 -55 11 47.4
  Extent = 6.0 (4.3-8.4)", rotation angle = 0
  Source counts = 54.5 +/- 10.3
  Background counts = 52.6
  Rate = 0.005 +/- 0.001
[Wed May  1 08:19:34 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:34 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:34 2013] Source does appear to be extended
[Wed May  1 08:19:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:40:59 2013] XMMSAS src. selection expression = ellipse(18547.123600, 14605.146600, 362.926810, 362.926810, 0.000000, X, Y)
[Wed May  1 08:40:59 2013] Writing source region out to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src2_src.reg
[Wed May  1 08:40:59 2013] Extracting stamp from image fullrun_mos2_xmm0110970101_pi300-10000_cl_sm2.00.img.gz, (193, 148) - (235, 189)
[Wed May  1 08:40:59 2013] XMMSAS bgd. selection expression = annulus(18547.123600, 14605.146600, 604.878017, 1209.756035, X, Y)
[Wed May  1 08:40:59 2013] Writing fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src2.gif
[Wed May  1 08:42:01 2013] Mean detx,y = (-7359.48, 8822.00) 
[Wed May  1 08:42:02 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 08:42:08 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 08:42:08 2013] Setting source spectrum file to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  1 08:42:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  1 08:47:47 2013] Not generating rmf since there are only 54 counts
[Wed May  1 08:47:47 2013] rmf not generated due to insufficient counts
[Wed May  1 08:48:34 2013] Updating aperture counts using extracted products
[Wed May  1 08:48:34 2013] Total counts from fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 65.00
[Wed May  1 08:48:34 2013] Total counts from fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 49.00
[Wed May  1 08:48:34 2013] Got source and background scale factors 417600.000000, 3458380.000000
[Wed May  1 08:48:34 2013] User source parameters:
  Position = (213.7, 168.4) = 3 13 46.58 -55 11 47.4
  Extent = 6.0 (4.3-8.4)", rotation angle = 0
  Source aperture counts = 59.1 +/- 9.1
  Background aperture counts = 5.9
  Rate = 0.006 +/- 0.0009

[Wed May  1 08:48:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:48:35 2013] Using photon index=1.80, rate=0.0053, arf fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src2.arf
[Wed May  1 08:48:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:48:35 2013] Updating source flux to 1.2e-13
[Wed May  1 08:48:38 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 08:48:39 2013] xmm0110970101/analysis//spectral/fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete