[Wed May  1 08:18:41 2013] Detection parameters:
  Position = (423.3, 298.3) = 3 12 0.37 -55 2 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.7 +/- 5.8
  Background counts = 2.3
  Rate = 0.002 +/- 0.0006

[Wed May  1 08:18:42 2013] Off-axis axis estimate = 9.05'
[Wed May  1 08:18:59 2013] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:18:59 2013] Initial guess for spatial extent in simple fitting = 10.95"
[Wed May  1 08:18:59 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.988
[Wed May  1 08:18:59 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.95"
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src15.ximg exists
[Wed May  1 08:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src15.csv
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May  1 08:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src15.csv
[Wed May  1 08:18:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May  1 08:18:59 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May  1 08:18:59 2013] Fit fullrun_mos2_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed May  1 08:19:10 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.231571 pixels away
[Wed May  1 08:19:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:10 2013] Assessing source extent using major
[Wed May  1 08:19:10 2013] Source does appear to be extended
[Wed May  1 08:19:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:19:21 2013] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:19:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 08:19:21 2013] Initial guess for spatial extent in simple fitting = 10.95"
[Wed May  1 08:19:21 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.988
[Wed May  1 08:19:21 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 10.95"
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src14.ximg exists
[Wed May  1 08:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src14.csv
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May  1 08:19:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src14.csv
[Wed May  1 08:19:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May  1 08:19:22 2013] fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May  1 08:19:22 2013] Fit fullrun_mos2_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed May  1 08:19:34 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 58.392489 pixels away
[Wed May  1 08:19:34 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 61.377327 pixels away
[Wed May  1 08:19:34 2013] Spatial fit model total counts = 36.953700, observed total counts = 37.000000
[Wed May  1 08:19:34 2013] Offset between fit and detection position for source 11 = 0.219037 pixels
[Wed May  1 08:19:34 2013] 37.069000 total counts/ 24.456000 bgd. counts: snr = 2.550502
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.219037 pixels
  Position = (423.1, 298.5) = 3 12 0.45 -55 2 21.2
  Extent = 4.1 (2.7-5.9)", rotation angle = 0
  Source counts = 12.6 +/- 6.1
  Background counts = 24.5
  Rate = 0.001 +/- 0.0006
[Wed May  1 08:19:34 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:34 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:34 2013] Source does appear to be extended
[Wed May  1 08:19:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:40:59 2013] XMMSAS src. selection expression = ellipse(36762.076700, 25919.330400, 248.419807, 248.419807, 0.000000, X, Y)
[Wed May  1 08:40:59 2013] Writing source region out to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src11_src.reg
[Wed May  1 08:40:59 2013] Extracting stamp from image fullrun_mos2_xmm0110970101_pi300-10000_cl_sm2.00.img.gz, (409, 284) - (437, 313)
[Wed May  1 08:40:59 2013] XMMSAS bgd. selection expression = annulus(36762.076700, 25919.330400, 414.033012, 828.066024, X, Y)
[Wed May  1 08:40:59 2013] Writing fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src11.gif
[Wed May  1 08:43:35 2013] Mean detx,y = (11987.88, -467.94) 
[Wed May  1 08:43:35 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 08:43:39 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 08:43:39 2013] Setting source spectrum file to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May  1 08:43:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May  1 08:48:11 2013] Not generating rmf since there are only 12 counts
[Wed May  1 08:48:11 2013] rmf not generated due to insufficient counts
[Wed May  1 08:48:35 2013] Updating aperture counts using extracted products
[Wed May  1 08:48:35 2013] Total counts from fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 16.00
[Wed May  1 08:48:35 2013] Total counts from fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 21.00
[Wed May  1 08:48:35 2013] Got source and background scale factors 190400.000000, 1627200.000000
[Wed May  1 08:48:35 2013] User source parameters:
  Position = (423.1, 298.5) = 3 12 0.45 -55 2 21.2
  Extent = 4.1 (2.7-5.9)", rotation angle = 0
  Source aperture counts = 13.5 +/- 5.1
  Background aperture counts = 2.5
  Rate = 0.001 +/- 0.0005

[Wed May  1 08:48:35 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:48:35 2013] Using photon index=1.80, rate=0.00123, arf fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src11.arf
[Wed May  1 08:48:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:48:35 2013] Updating source flux to 3.8e-14
[Wed May  1 08:48:38 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 08:48:39 2013] xmm0110970101/analysis//spectral/fullrun_mos2_xmm0110970101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete