[Wed May  1 08:18:41 2013] Detection parameters:
  Position = (323.0, 90.2) = 3 12 51.04 -55 17 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.4 +/- 6.1
  Background counts = 2.0
  Rate = 0.002 +/- 0.0006

[Wed May  1 08:18:41 2013] Off-axis axis estimate = 15.20'
[Wed May  1 08:18:58 2013] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:18:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 08:18:58 2013] Initial guess for spatial extent in simple fitting = 14.03"
[Wed May  1 08:18:58 2013] source mask rpix=3.2, npix_max = 55, mask sum = 59, frac = 1.063
[Wed May  1 08:18:58 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 14.03"
[Wed May  1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src15.ximg exists
[Wed May  1 08:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src15.csv
[Wed May  1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May  1 08:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src15.csv
[Wed May  1 08:18:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May  1 08:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May  1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May  1 08:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May  1 08:18:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:19:08 2013] Spatial fit model total counts = 52.985800, observed total counts = 44.000000
[Wed May  1 08:19:08 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 08:19:08 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:08 2013] Assessing source extent using major
[Wed May  1 08:19:08 2013] Source does appear to be extended
[Wed May  1 08:19:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:19:20 2013] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:19:20 2013] Initial guess for spatial extent in simple fitting = 14.03"
[Wed May  1 08:19:20 2013] source mask rpix=3.2, npix_max = 55, mask sum = 59, frac = 1.063
[Wed May  1 08:19:20 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 14.03"
[Wed May  1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src14.ximg exists
[Wed May  1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May  1 08:19:21 2013] Fit fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src14 appears to have run properly
[Wed May  1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May  1 08:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May  1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May  1 08:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May  1 08:19:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:19:31 2013] Spatial fit model total counts = 46.776100, observed total counts = 44.000000
[Wed May  1 08:19:31 2013] Offset between fit and detection position for source 22 = 1.113512 pixels
[Wed May  1 08:19:31 2013] 47.067000 total counts/ 25.953800 bgd. counts: snr = 4.144323
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.113512 pixels
  Position = (322.1, 89.6) = 3 12 51.52 -55 17 31.0
  Extent = 11.6 (3.6-21.7)" x 3.5 (3.5-5.0)", rotation angle = 337 (322-358) degrees
  Source counts = 21.1 +/- 6.9
  Background counts = 26.0
  Rate = 0.002 +/- 0.0007
[Wed May  1 08:19:31 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:31 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:31 2013] Source does appear to be extended
[Wed May  1 08:19:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.71
[Wed May  1 08:39:27 2013] XMMSAS src. selection expression = ellipse(27970.788600, 7743.083400, 693.096020, 212.256606, 336.918791, X, Y)
[Wed May  1 08:39:27 2013] Not overwriting source region fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_src.reg
[Wed May  1 08:39:27 2013] Extracting stamp from image fullrun_mos1_xmm0110970101_pi300-10000_cl_sm2.00.img.gz, (282, 50) - (362, 129)
[Wed May  1 08:39:27 2013] XMMSAS bgd. selection expression = annulus(27970.788600, 7743.083400, 1155.160033, 2310.320066, X, Y)
[Wed May  1 08:39:27 2013] Writing fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22.gif
[Wed May  1 08:39:27 2013] ../../xmm0110970101/products/events/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0110970101/products/events/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed May  1 08:39:27 2013] Mean detx,y = (16843.10, -1380.00) 
[Wed May  1 08:39:27 2013] ../../xmm0110970101/products/images/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_src.img and ../../xmm0110970101/products/images/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed May  1 08:39:27 2013] ../../xmm0110970101/products/spectra/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0110970101/products/spectra/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed May  1 08:39:27 2013] Setting source spectrum file to fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed May  1 08:39:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed May  1 08:39:27 2013] ../../xmm0110970101/products/lightcurves/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0110970101/products/lightcurves/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed May  1 08:40:35 2013] Not generating rmf since there are only 21 counts
[Wed May  1 08:40:35 2013] rmf not generated due to insufficient counts
[Wed May  1 08:48:32 2013] Updating aperture counts using extracted products
[Wed May  1 08:48:32 2013] Total counts from fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 20.00
[Wed May  1 08:48:32 2013] Total counts from fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 99.00
[Wed May  1 08:48:32 2013] Got source and background scale factors 417180.000000, 6575865.000000
[Wed May  1 08:48:32 2013] User source parameters:
  Position = (322.1, 89.6) = 3 12 51.52 -55 17 31.0
  Extent = 11.6 (3.6-21.7)" x 3.5 (3.5-5.0)", rotation angle = 337 (322-358) degrees
  Source aperture counts = 13.7 +/- 5.6
  Background aperture counts = 6.3
  Rate = 0.001 +/- 0.0005

[Wed May  1 08:48:33 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:48:33 2013] Using photon index=1.80, rate=0.00205, arf fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22.arf
[Wed May  1 08:48:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:48:33 2013] Updating source flux to 7.6e-14
[Wed May  1 08:48:37 2013] Flag p found in src. 22 procflags, skipping spectral fitting
[Wed May  1 08:48:37 2013] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 08:48:38 2013] xmm0110970101/analysis//spectral/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete