[Wed May 1 08:18:40 2013] Detection parameters: Position = (372.9, 249.6) = 3 12 25.80 -55 5 52.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 19.1 +/- 5.7 Background counts = 2.7 Rate = 0.003 +/- 0.0009 [Wed May 1 08:18:41 2013] Off-axis axis estimate = 6.46' [Wed May 1 08:18:58 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting [Wed May 1 08:18:58 2013] Initial guess for spatial extent in simple fitting = 9.66" [Wed May 1 08:18:58 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.845 [Wed May 1 08:18:58 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.66" [Wed May 1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src13.ximg exists [Wed May 1 08:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src13.csv [Wed May 1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src13_1.ximg exists [Wed May 1 08:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src13.csv [Wed May 1 08:18:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Wed May 1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Wed May 1 08:18:58 2013] Fit fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Wed May 1 08:19:08 2013] Spatial fit model total counts = 44.322300, observed total counts = 42.000000 [Wed May 1 08:19:08 2013] Offset between fit and detection position for source 17 = 0.221324 pixels [Wed May 1 08:19:08 2013] 45.998000 total counts/ 23.533700 bgd. counts: snr = 4.630712 Spatial fit parameters: Offset between fit and detection position for source 17 = 0.221324 pixels Position = (372.8, 249.4) = 3 12 25.84 -55 5 55.3 Extent = 8.2 (2.4-12.7)", rotation angle = 0 Source counts = 22.5 +/- 6.8 Background counts = 23.5 Rate = 0.002 +/- 0.0007 [Wed May 1 08:19:08 2013] Vigneting correction estimate = 1.000000 [Wed May 1 08:19:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 08:19:08 2013] Assessing source extent using major axis lower bound [Wed May 1 08:19:08 2013] Source does appear to be extended [Wed May 1 08:19:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 08:19:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 1 08:19:20 2013] Initial guess for spatial extent in simple fitting = 8.19" [Wed May 1 08:19:20 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.880 [Wed May 1 08:19:20 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 8.19" [Wed May 1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src12.ximg exists [Wed May 1 08:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src12.csv [Wed May 1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src12_1.ximg exists [Wed May 1 08:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src12.csv [Wed May 1 08:19:21 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Wed May 1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Wed May 1 08:19:21 2013] Fit fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly [Wed May 1 08:19:31 2013] Spatial fit model total counts = 44.872600, observed total counts = 42.000000 [Wed May 1 08:19:31 2013] Offset between fit and detection position for source 17 = 0.087127 pixels [Wed May 1 08:19:31 2013] 46.468200 total counts/ 25.547500 bgd. counts: snr = 4.139063 Spatial fit parameters: Offset between fit and detection position for source 17 = 0.087127 pixels Position = (372.9, 249.4) = 3 12 25.80 -55 5 55.5 Extent = 7.6 (2.3-13.5)", rotation angle = 0 Source counts = 20.9 +/- 6.8 Background counts = 25.5 Rate = 0.002 +/- 0.0007 [Wed May 1 08:19:31 2013] Vigneting correction estimate = 1.000000 [Wed May 1 08:19:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 08:19:31 2013] Assessing source extent using major axis lower bound [Wed May 1 08:19:31 2013] Source does appear to be extended [Wed May 1 08:19:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 08:39:27 2013] XMMSAS src. selection expression = ellipse(32395.423300, 21646.788800, 456.020413, 456.020413, 0.000000, X, Y) [Wed May 1 08:39:27 2013] Not overwriting source region fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_src.reg [Wed May 1 08:39:27 2013] Extracting stamp from image fullrun_mos1_xmm0110970101_pi300-10000_cl_sm2.00.img.gz, (347, 223) - (399, 276) [Wed May 1 08:39:27 2013] XMMSAS bgd. selection expression = annulus(32395.423300, 21646.788800, 760.034022, 1520.068044, X, Y) [Wed May 1 08:39:27 2013] Writing fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17.gif [Wed May 1 08:39:27 2013] ../../xmm0110970101/products/events/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0110970101/products/events/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create [Wed May 1 08:39:27 2013] Mean detx,y = (3540.04, -7364.79) [Wed May 1 08:39:27 2013] ../../xmm0110970101/products/images/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0110970101/products/images/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create [Wed May 1 08:39:27 2013] ../../xmm0110970101/products/spectra/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0110970101/products/spectra/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create [Wed May 1 08:39:27 2013] Setting source spectrum file to fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_src_b10.pi.gz [Wed May 1 08:39:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_bgd.pi.gz [Wed May 1 08:39:27 2013] ../../xmm0110970101/products/lightcurves/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0110970101/products/lightcurves/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create [Wed May 1 08:40:27 2013] Not generating rmf since there are only 20 counts [Wed May 1 08:40:27 2013] rmf not generated due to insufficient counts [Wed May 1 08:48:31 2013] Updating aperture counts using extracted products [Wed May 1 08:48:31 2013] Total counts from fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 28.00 [Wed May 1 08:48:31 2013] Total counts from fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 62.00 [Wed May 1 08:48:31 2013] Got source and background scale factors 577608.000000, 4563464.000000 [Wed May 1 08:48:31 2013] User source parameters: Position = (372.9, 249.4) = 3 12 25.80 -55 5 55.5 Extent = 7.6 (2.3-13.5)", rotation angle = 0 Source aperture counts = 20.2 +/- 6.4 Background aperture counts = 7.8 Rate = 0.002 +/- 0.0006 [Wed May 1 08:48:33 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 08:48:33 2013] Using photon index=1.80, rate=0.00203, arf fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17.arf [Wed May 1 08:48:33 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 08:48:33 2013] Updating source flux to 3.4e-14 [Wed May 1 08:48:37 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 1 08:48:38 2013] xmm0110970101/analysis//spectral/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete