[Wed May 1 08:18:40 2013] Detection parameters: Position = (451.6, 234.2) = 3 11 45.87 -55 6 59.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 255.3 +/- 19.0 Background counts = 2.8 Rate = 0.02 +/- 0.002 [Wed May 1 08:18:41 2013] Off-axis axis estimate = 12.04' [Wed May 1 08:18:58 2013] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting [Wed May 1 08:18:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 1 08:18:58 2013] Initial guess for spatial extent in simple fitting = 12.45" [Wed May 1 08:18:58 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.084 [Wed May 1 08:18:58 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.45" [Wed May 1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src1.ximg exists [Wed May 1 08:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src1.csv [Wed May 1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src1_1.ximg exists [Wed May 1 08:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src1.csv [Wed May 1 08:18:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed May 1 08:18:58 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed May 1 08:18:58 2013] Fit fullrun_mos1_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Wed May 1 08:19:08 2013] Spatial fit model total counts = 318.315000, observed total counts = 288.000000 [Wed May 1 08:19:08 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 08:19:08 2013] Vigneting correction estimate = 1.000000 [Wed May 1 08:19:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 08:19:08 2013] Assessing source extent using major [Wed May 1 08:19:08 2013] Source does appear to be extended [Wed May 1 08:19:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 08:19:20 2013] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting [Wed May 1 08:19:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 1 08:19:20 2013] Initial guess for spatial extent in simple fitting = 12.45" [Wed May 1 08:19:20 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.084 [Wed May 1 08:19:20 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.45" [Wed May 1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src1.ximg exists [Wed May 1 08:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src1.csv [Wed May 1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src1_1.ximg exists [Wed May 1 08:19:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src1.csv [Wed May 1 08:19:21 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed May 1 08:19:21 2013] fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed May 1 08:19:21 2013] Fit fullrun_mos1_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Wed May 1 08:19:31 2013] Spatial fit model total counts = 319.102000, observed total counts = 288.000000 [Wed May 1 08:19:31 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 08:19:31 2013] Vigneting correction estimate = 1.000000 [Wed May 1 08:19:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 08:19:31 2013] Assessing source extent using major [Wed May 1 08:19:31 2013] Source does appear to be extended [Wed May 1 08:19:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 08:39:27 2013] XMMSAS src. selection expression = ellipse(39242.420990, 20325.132812, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 08:39:27 2013] Not overwriting source region fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_src.reg [Wed May 1 08:39:27 2013] Extracting stamp from image fullrun_mos1_xmm0110970101_pi300-10000_cl_sm2.00.img.gz, (414, 197) - (489, 272) [Wed May 1 08:39:27 2013] XMMSAS bgd. selection expression = annulus(39242.420990, 20325.132812, 1087.500000, 2175.000000, X, Y) [Wed May 1 08:39:27 2013] Writing fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1.gif [Wed May 1 08:39:27 2013] ../../xmm0110970101/products/events/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0110970101/products/events/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create [Wed May 1 08:39:27 2013] Mean detx,y = (5635.20, -13952.88) [Wed May 1 08:39:27 2013] ../../xmm0110970101/products/images/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0110970101/products/images/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create [Wed May 1 08:39:27 2013] ../../xmm0110970101/products/spectra/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0110970101/products/spectra/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create [Wed May 1 08:39:27 2013] Setting source spectrum file to fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed May 1 08:39:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed May 1 08:39:27 2013] ../../xmm0110970101/products/lightcurves/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0110970101/products/lightcurves/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create [Wed May 1 08:39:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 08:39:54 2013] rmf not generated due to insufficient counts [Wed May 1 08:48:30 2013] Updating aperture counts using extracted products [Wed May 1 08:48:30 2013] Total counts from fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 226.00 [Wed May 1 08:48:30 2013] Total counts from fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 163.00 [Wed May 1 08:48:30 2013] Got source and background scale factors 1336000.000000, 10935060.000000 [Wed May 1 08:48:30 2013] User source parameters: Position = (451.6, 234.2) = 3 11 45.87 -55 6 59.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 206.1 +/- 16.1 Background aperture counts = 19.9 Rate = 0.02 +/- 0.002 [Wed May 1 08:48:30 2013] Updating counts from extracted products [Wed May 1 08:48:30 2013] Set source signif. to 206.09/4.46 = 46.18 [Wed May 1 08:48:33 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 08:48:33 2013] Using photon index=1.80, rate=0.02, arf fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1.arf [Wed May 1 08:48:33 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 08:48:33 2013] Updating source flux to 5.5e-13 [Wed May 1 08:48:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 08:48:38 2013] xmm0110970101/analysis//spectral/fullrun_mos1_xmm0110970101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete