[Sun Jun 9 18:58:38 2013] Detection parameters: Position = (163.9, 275.1) = 18 23 39.52 64 17 52.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 85.9 +/- 18.6 Background counts = 88.8 Rate = 0.04 +/- 0.009 [Sun Jun 9 18:58:39 2013] Off-axis axis estimate = 9.90' [Sun Jun 9 19:01:40 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 11.38" [Sun Jun 9 19:01:40 2013] source mask rpix=2.6, npix_max = 38, mask sum = 34, frac = 0.876 [Sun Jun 9 19:01:40 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 11.38" [Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src85.ximg exists [Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src85.csv [Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src85_1.ximg exists [Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src85.csv [Mon Jun 10 00:31:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src85_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 00:31:20 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src85.ximg exists [Mon Jun 10 00:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src85.csv [Mon Jun 10 00:31:20 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists [Mon Jun 10 00:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src85.csv [Mon Jun 10 00:31:20 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src85_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 00:38:11 2013] Source 86 is offset by -0.812069 and 6.892285 pixels which is larger than 2 X fitted extent = 1.344956 x 1.344956, not incorporating fit results [Mon Jun 10 00:38:11 2013] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 10.604577 pixels away [Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000 [Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 10 00:38:11 2013] Assessing source extent using major [Mon Jun 10 00:38:11 2013] Source does appear to be extended [Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 00:38:11 2013] Source is confused with source 83 [Mon Jun 10 00:38:22 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting [Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 11.38" [Mon Jun 10 00:38:22 2013] source mask rpix=2.6, npix_max = 38, mask sum = 34, frac = 0.876 [Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 11.38" [Mon Jun 10 07:53:50 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src78.ximg exists [Mon Jun 10 07:53:50 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src78_1.ximg exists [Mon Jun 10 07:53:50 2013] Fit fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src78 appears to have run properly [Mon Jun 10 07:53:52 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src78.ximg exists [Mon Jun 10 07:53:52 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists [Mon Jun 10 07:53:52 2013] Fit fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src78 appears to have run properly [Mon Jun 10 08:01:00 2013] Spatial fit model total counts = 4977.280000, observed total counts = 428.000000 [Mon Jun 10 08:01:00 2013] Poor agreement between spatial fit and data for source 86 It may help to tweak spatial fit manually Not incorporating fit results [Mon Jun 10 08:01:00 2013] Spatial fit model total counts = 557.308000, observed total counts = 578.000000 [Mon Jun 10 08:01:00 2013] Offset between fit and detection position for source 86 = 1.222408 pixels [Mon Jun 10 08:01:00 2013] 612.657000 total counts/ 462.281000 bgd. counts: snr = 6.993998 Spatial fit parameters: Offset between fit and detection position for source 86 = 1.222408 pixels Position = (162.8, 275.5) = 18 23 40.29 64 17 47.8 Extent = 22.8 (22.6-45.5)" x 5.9 (3.9-7.2)", rotation angle = 21 (15-28) degrees Source counts = 150.4 +/- 24.8 Background counts = 462.3 Rate = 0.3 +/- 0.05 [Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000 [Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 10 08:01:00 2013] Assessing source extent using major axis lower bound [Mon Jun 10 08:01:00 2013] Source does appear to be extended [Mon Jun 10 08:01:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.14 [Mon Jun 10 08:01:00 2013] Source is asymmetric [Mon Jun 10 08:01:14 2013] XMMSAS src. selection expression = ellipse(14114.825000, 23923.916400, 1365.174039, 352.917610, 20.950600, X, Y) [Mon Jun 10 08:01:14 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src86_src.reg [Mon Jun 10 08:01:14 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (84, 197) - (241, 354) [Mon Jun 10 08:01:14 2013] XMMSAS bgd. selection expression = annulus(14114.825000, 23923.916400, 2275.290065, 4550.580131, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(19244.910000, 29886.468000, 1578.328045, 1578.328045, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(19064.940414, 29008.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.252670, 28889.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19257.775192, 28586.986603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19056.221298, 27732.672516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12067.162003, 25431.128510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12756.762054, 25091.640533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11695.345062, 24912.580048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12521.757446, 24513.699066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13805.814575, 24221.465302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13381.348404, 24176.982941, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 10 08:01:14 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src86.gif [Mon Jun 10 08:42:15 2013] Mean detx,y = (-11446.39, 6567.52) [Mon Jun 10 08:42:17 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 10 08:42:59 2013] Binned source spectrum to 10 counts/bin [Mon Jun 10 08:43:00 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src86_src_b10.pi.gz [Mon Jun 10 08:43:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src86_bgd.pi.gz [Mon Jun 10 10:09:05 2013] Updating aperture counts using extracted products [Mon Jun 10 10:09:05 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 483.00 [Mon Jun 10 10:09:05 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src86_bgd.pi.gz = 10070.00 [Mon Jun 10 10:09:05 2013] Got source and background scale factors 1126437.000000, 21560977.000000 [Mon Jun 10 10:09:05 2013] User source parameters: Position = (162.8, 275.5) = 18 23 40.29 64 17 47.8 Extent = 22.8 (22.6-45.5)" x 5.9 (3.9-7.2)", rotation angle = 21 (15-28) degrees Source aperture counts = -43.1 +/- 23.0 Background aperture counts = 526.1 Rate = -0.08 +/- 0.04 [Mon Jun 10 10:09:07 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 10:09:07 2013] Using photon index=1.80, rate=0.289, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src86.arf [Mon Jun 10 10:09:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 10:09:07 2013] Updating source flux to 3.3e-12 [Mon Jun 10 10:09:11 2013] Flag b found in src. 86 procflags, skipping spectral fitting [Mon Jun 10 10:09:11 2013] Flag p found in src. 86 procflags, skipping spectral fitting [Mon Jun 10 10:09:11 2013] Flag c found in src. 86 procflags, skipping spectral fitting [Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete