[Sun Jun  9 18:58:38 2013] Detection parameters:
  Position = (279.0, 312.0) = 18 22 22.59 64 20 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.6 +/- 21.4
  Background counts = 93.8
  Rate = 0.1 +/- 0.01

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 1.72'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Jun  9 19:01:40 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 7.29"
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src70.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src70.csv
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src70_1.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src70.csv
[Mon Jun 10 00:31:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:20 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Mon Jun 10 00:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src70.csv
[Mon Jun 10 00:31:20 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Mon Jun 10 00:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src70.csv
[Mon Jun 10 00:31:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Warning, spatial fit 70 centroid is now closest to src. 68
[Mon Jun 10 00:38:11 2013] Spatial fit model total counts = 1101.780000, observed total counts = 893.000000
[Mon Jun 10 00:38:11 2013] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 61
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jun 10 00:38:22 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 7.29"
[Mon Jun 10 07:53:50 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src63.ximg exists
[Mon Jun 10 07:53:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src63.csv
[Mon Jun 10 07:53:50 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src63_1.ximg exists
[Mon Jun 10 07:53:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src63.csv
[Mon Jun 10 07:53:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:52 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Mon Jun 10 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src63.csv
[Mon Jun 10 07:53:52 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Mon Jun 10 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src63.csv
[Mon Jun 10 07:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Warning, spatial fit 63 centroid is now closest to src. 65
[Mon Jun 10 08:01:00 2013] Spatial fit model total counts = 1102.380000, observed total counts = 893.000000
[Mon Jun 10 08:01:00 2013] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:14 2013] XMMSAS src. selection expression = ellipse(24226.339935, 27093.723785, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:14 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src71_src.reg
[Mon Jun 10 08:01:14 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (242, 274) - (317, 349)
[Mon Jun 10 08:01:14 2013] XMMSAS bgd. selection expression = annulus(24226.339935, 27093.723785, 1087.500000, 2175.000000, X, Y) && !ellipse(22046.844971, 29007.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21683.451111, 29355.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22523.186432, 28748.375214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23354.794708, 28583.155396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.697235, 28403.229370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.612411, 28328.007080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.204193, 28065.876038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.862213, 27961.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.915039, 28053.962921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23150.545959, 28145.582672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23867.443695, 27529.047699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.170471, 27543.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.370667, 27444.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.795425, 27543.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.361420, 27176.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.930634, 27153.236267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.751251, 26755.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26864.470000, 25833.030000, 1132.936033, 1132.936033, 0.000000, X, Y) && !ellipse(24007.791199, 25979.612427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.892334, 25628.251160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24178.493652, 25180.645081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23421.430634, 25055.609131, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:14 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src71.gif
[Mon Jun 10 08:36:40 2013] Mean detx,y = (-3029.19, 841.72) 
[Mon Jun 10 08:36:42 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:36:54 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:36:54 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Mon Jun 10 08:36:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Mon Jun 10 09:49:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 09:49:15 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:09:02 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:09:02 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 746.00
[Mon Jun 10 10:09:02 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src71_bgd.pi.gz = 535.00
[Mon Jun 10 10:09:02 2013] Got source and background scale factors 1337600.000000, 2443940.000000
[Mon Jun 10 10:09:02 2013] User source parameters:
  Position = (279.0, 312.0) = 18 22 22.59 64 20 28.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 453.2 +/- 28.3
  Background aperture counts = 292.8
  Rate = 0.9 +/- 0.05

[Mon Jun 10 10:09:02 2013] Updating counts from extracted products
[Mon Jun 10 10:09:02 2013] Set source signif. to 453.19/17.11 = 26.48
[Mon Jun 10 10:09:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:07 2013] Using photon index=1.80, rate=0.87, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src71.arf
[Mon Jun 10 10:09:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:07 2013] Updating source flux to 2.8e-12
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete