[Sun Jun  9 18:58:38 2013] Detection parameters:
  Position = (265.6, 317.1) = 18 22 31.58 64 20 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.3 +/- 19.9
  Background counts = 98.4
  Rate = 0.08 +/- 0.01

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 2.74'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 7.80"
[Sun Jun  9 19:01:40 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 7.80"
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src62.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src62.csv
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src62_1.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src62.csv
[Mon Jun 10 00:31:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:20 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Mon Jun 10 00:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src62.csv
[Mon Jun 10 00:31:20 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Mon Jun 10 00:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src62.csv
[Mon Jun 10 00:31:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Source 63 is offset by -0.707429 and 1.871560 pixels which is larger than
2 X fitted extent = 0.896368 x 0.896368, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 58
[Mon Jun 10 00:38:11 2013] Source is confused with source 62
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 7.80"
[Mon Jun 10 00:38:22 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.951
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 7.80"
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src55.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src55.csv
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src55_1.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src55.csv
[Mon Jun 10 07:53:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:52 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Mon Jun 10 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src55.csv
[Mon Jun 10 07:53:52 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Mon Jun 10 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src55.csv
[Mon Jun 10 07:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Warning, spatial fit 55 centroid is now closest to src. 61
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:13 2013] XMMSAS src. selection expression = ellipse(23059.170471, 27543.331757, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src63_src.reg
[Mon Jun 10 08:01:13 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (228, 280) - (303, 355)
[Mon Jun 10 08:01:14 2013] XMMSAS bgd. selection expression = annulus(23059.170471, 27543.331757, 1087.500000, 2175.000000, X, Y) && !ellipse(21028.246964, 29692.336365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.844971, 29007.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21683.451111, 29355.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21094.661194, 29276.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22523.186432, 28748.375214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23354.794708, 28583.155396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.697235, 28403.229370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.612411, 28328.007080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.172638, 28164.547546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.204193, 28065.876038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.862213, 27961.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.915039, 28053.962921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23150.545959, 28145.582672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.623016, 27714.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23867.443695, 27529.047699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.370667, 27444.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.795425, 27543.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.361420, 27176.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.930634, 27153.236267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.751251, 26755.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24226.339935, 27093.723785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24007.791199, 25979.612427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.892334, 25628.251160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24178.493652, 25180.645081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23421.430634, 25055.609131, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:14 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src63.gif
[Mon Jun 10 08:33:16 2013] Mean detx,y = (-4368.05, 742.10) 
[Mon Jun 10 08:33:18 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:33:36 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:33:36 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Jun 10 08:33:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Mon Jun 10 09:27:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 09:27:36 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:09:00 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:09:00 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 642.00
[Mon Jun 10 10:09:01 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src63_bgd.pi.gz = 408.00
[Mon Jun 10 10:09:01 2013] Got source and background scale factors 1131490.000000, 919505.000000
[Mon Jun 10 10:09:01 2013] User source parameters:
  Position = (265.6, 317.1) = 18 22 31.58 64 20 49.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 139.9 +/- 26.4
  Background aperture counts = 502.1
  Rate = 0.3 +/- 0.05

[Mon Jun 10 10:09:01 2013] Updating counts from extracted products
[Mon Jun 10 10:09:01 2013] Set source signif. to 139.94/22.41 = 6.25
[Mon Jun 10 10:09:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:07 2013] Using photon index=1.80, rate=0.269, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src63.arf
[Mon Jun 10 10:09:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:07 2013] Updating source flux to 9.5e-13
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete