[Sun Jun  9 18:58:38 2013] Detection parameters:
  Position = (219.6, 319.3) = 18 23 2.41 64 20 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.9 +/- 19.2
  Background counts = 142.0
  Rate = 0.08 +/- 0.02

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 5.91'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Sun Jun  9 19:01:40 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.885
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 9.39"
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src59.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src59.csv
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src59_1.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src59.csv
[Mon Jun 10 00:31:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src59.csv
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src59.csv
[Mon Jun 10 00:31:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Source 60 is offset by 8.221463 and -3.563856 pixels which is larger than
2 X fitted extent = 1.078759 x 1.078759, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Mon Jun 10 00:38:22 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.885
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 9.39"
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src52.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src52.csv
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src52_1.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src52.csv
[Mon Jun 10 07:53:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:52 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Mon Jun 10 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src52.csv
[Mon Jun 10 07:53:52 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Mon Jun 10 07:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src52.csv
[Mon Jun 10 07:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Source 60 is offset by -6.769318 and 1.711983 pixels which is larger than
2 X fitted extent = 1.253835 x 1.253835, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:13 2013] XMMSAS src. selection expression = ellipse(19056.221298, 27732.672516, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src60_src.reg
[Mon Jun 10 08:01:13 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (182, 282) - (257, 357)
[Mon Jun 10 08:01:13 2013] XMMSAS bgd. selection expression = annulus(19056.221298, 27732.672516, 1087.500000, 2175.000000, X, Y) && !ellipse(15517.540000, 31542.724000, 1649.080047, 1649.080047, 0.000000, X, Y) && !ellipse(16580.608000, 30845.238000, 1772.176051, 1772.176051, 0.000000, X, Y) && !ellipse(18485.448000, 30481.007000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(17609.440079, 30498.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19857.102921, 30077.363403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19314.795600, 30392.026000, 1542.408044, 1542.408044, 0.000000, X, Y) && !ellipse(19244.910000, 29886.468000, 1578.328045, 1578.328045, 0.000000, X, Y) && !ellipse(21028.246964, 29692.336365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18724.650620, 29627.505859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.719406, 29344.787720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(16728.975281, 29460.523102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.844971, 29007.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21683.451111, 29355.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21094.661194, 29276.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.016541, 29349.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19064.940414, 29008.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.252670, 28889.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19257.775192, 28586.986603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.172638, 28164.547546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.862213, 27961.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.623016, 27714.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.795425, 27543.475128, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src60.gif
[Mon Jun 10 08:32:24 2013] Mean detx,y = (-8208.24, 1745.10) 
[Mon Jun 10 08:32:26 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:32:47 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:32:47 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Jun 10 08:32:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Jun 10 09:27:16 2013] Not generating rmf since there are only 85 counts
[Mon Jun 10 09:27:16 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:09:00 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:09:00 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 655.00
[Mon Jun 10 10:09:00 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src60_bgd.pi.gz = 2090.00
[Mon Jun 10 10:09:00 2013] Got source and background scale factors 1177672.000000, 3891232.000000
[Mon Jun 10 10:09:00 2013] User source parameters:
  Position = (219.6, 319.3) = 18 23 2.41 64 20 59.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 22.5 +/- 26.6
  Background aperture counts = 632.5
  Rate = 0.04 +/- 0.05

[Mon Jun 10 10:09:00 2013] Updating counts from extracted products
[Mon Jun 10 10:09:00 2013] Set source signif. to 22.47/25.15 = 0.89
[Mon Jun 10 10:09:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:07 2013] Using photon index=1.80, rate=0.0431, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src60.arf
[Mon Jun 10 10:09:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:07 2013] Updating source flux to 2e-13
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete