[Sun Jun  9 18:58:37 2013] Detection parameters:
  Position = (235.2, 324.3) = 18 22 51.98 64 21 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.9 +/- 18.1
  Background counts = 116.8
  Rate = 0.06 +/- 0.01

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 4.95'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 8.91"
[Sun Jun  9 19:01:40 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 8.91"
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src52.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src52.csv
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src52_1.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src52.csv
[Mon Jun 10 00:31:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src52.csv
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src52.csv
[Mon Jun 10 00:31:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Source 53 is offset by -0.468567 and 2.373696 pixels which is larger than
2 X fitted extent = 1.459517 x 1.459517, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Source 53 is offset by 3.972651 and 5.834110 pixels which is larger than
2 X fitted extent = 1.637324 x 1.023646, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 59
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 8.91"
[Mon Jun 10 00:38:22 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 8.91"
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src45.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src45.csv
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src45_1.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src45.csv
[Mon Jun 10 07:53:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src45.csv
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src45.csv
[Mon Jun 10 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Source 53 is offset by 4.646329 and -2.456143 pixels which is larger than
2 X fitted extent = 1.824704 x 1.824704, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Warning, spatial fit 45 centroid is now closest to src. 41
[Mon Jun 10 08:01:00 2013] Source 53 is offset by -5.316659 and -4.937729 pixels which is larger than
2 X fitted extent = 1.495959 x 1.495959, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:13 2013] XMMSAS src. selection expression = ellipse(20412.172638, 28164.547546, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src53_src.reg
[Mon Jun 10 08:01:13 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (198, 287) - (273, 362)
[Mon Jun 10 08:01:13 2013] XMMSAS bgd. selection expression = annulus(20412.172638, 28164.547546, 1087.500000, 2175.000000, X, Y) && !ellipse(16580.608000, 30845.238000, 1772.176051, 1772.176051, 0.000000, X, Y) && !ellipse(18485.448000, 30481.007000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(17609.440079, 30498.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19857.102921, 30077.363403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19314.795600, 30392.026000, 1542.408044, 1542.408044, 0.000000, X, Y) && !ellipse(19244.910000, 29886.468000, 1578.328045, 1578.328045, 0.000000, X, Y) && !ellipse(21028.246964, 29692.336365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18724.650620, 29627.505859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.719406, 29344.787720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(22046.844971, 29007.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21683.451111, 29355.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21094.661194, 29276.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.016541, 29349.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19064.940414, 29008.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.252670, 28889.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22523.186432, 28748.375214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23354.794708, 28583.155396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19257.775192, 28586.986603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.612411, 28328.007080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.862213, 27961.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23150.545959, 28145.582672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.623016, 27714.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19056.221298, 27732.672516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.170471, 27543.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.795425, 27543.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.361420, 27176.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.751251, 26755.935028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src53.gif
[Mon Jun 10 08:29:22 2013] Mean detx,y = (-6932.86, 939.93) 
[Mon Jun 10 08:29:24 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:29:42 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:29:42 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Jun 10 08:29:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon Jun 10 09:26:17 2013] Not generating rmf since there are only 75 counts
[Mon Jun 10 09:26:17 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:08:59 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:08:59 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 670.00
[Mon Jun 10 10:08:59 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src53_bgd.pi.gz = 1061.00
[Mon Jun 10 10:08:59 2013] Got source and background scale factors 1233282.000000, 1900254.000000
[Mon Jun 10 10:08:59 2013] User source parameters:
  Position = (235.2, 324.3) = 18 22 51.98 64 21 22.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -18.6 +/- 26.9
  Background aperture counts = 688.6
  Rate = -0.04 +/- 0.05

[Mon Jun 10 10:08:59 2013] Updating counts from extracted products
[Mon Jun 10 10:08:59 2013] Set source signif. to -18.60/26.24 = -0.71
[Mon Jun 10 10:09:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:06 2013] Using photon index=1.80, rate=-0.0357, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src53.arf
[Mon Jun 10 10:09:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:06 2013] Updated flux is not positive, keeping original flux
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete