[Sun Jun  9 18:58:37 2013] Detection parameters:
  Position = (282.0, 327.0) = 18 22 20.62 64 21 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.9 +/- 21.8
  Background counts = 69.2
  Rate = 0.1 +/- 0.01

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 2.39'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 7.62"
[Sun Jun  9 19:01:40 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.788
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 7.62"
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src49.csv
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src49.csv
[Mon Jun 10 00:31:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 10 00:31:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Warning, spatial fit 49 centroid is now closest to src. 54
[Mon Jun 10 00:38:11 2013] Spatial fit model total counts = 1120.880000, observed total counts = 916.000000
[Mon Jun 10 00:38:11 2013] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 54
[Mon Jun 10 00:38:11 2013] Source is confused with source 57
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 7.62"
[Mon Jun 10 00:38:22 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.788
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 7.62"
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src43.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src43.csv
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src43.csv
[Mon Jun 10 07:53:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src43.csv
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src43.csv
[Mon Jun 10 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Source 50 is offset by -4.726882 and -5.297088 pixels which is larger than
2 X fitted extent = 0.876428 x 0.876428, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Source 50 is offset by -3.226147 and -0.370329 pixels which is larger than
2 X fitted extent = 0.852763 x 0.852763, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Spatial fit model total counts = 1158.340000, observed total counts = 916.000000
[Mon Jun 10 08:01:00 2013] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:13 2013] XMMSAS src. selection expression = ellipse(24483.697235, 28403.229370, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src50_src.reg
[Mon Jun 10 08:01:13 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (244, 290) - (319, 365)
[Mon Jun 10 08:01:13 2013] XMMSAS bgd. selection expression = annulus(24483.697235, 28403.229370, 1087.500000, 2175.000000, X, Y) && !ellipse(22046.844971, 29007.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21683.451111, 29355.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22523.186432, 28748.375214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23354.794708, 28583.155396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.612411, 28328.007080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.204193, 28065.876038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.862213, 27961.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.915039, 28053.962921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23150.545959, 28145.582672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23867.443695, 27529.047699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.170471, 27543.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.370667, 27444.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.795425, 27543.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.361420, 27176.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.930634, 27153.236267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.751251, 26755.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24226.339935, 27093.723785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26864.470000, 25833.030000, 1132.936033, 1132.936033, 0.000000, X, Y) && !ellipse(24007.791199, 25979.612427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.892334, 25628.251160, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src50.gif
[Mon Jun 10 08:28:27 2013] Mean detx,y = (-3127.08, -432.20) 
[Mon Jun 10 08:28:29 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:28:51 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:28:51 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jun 10 08:28:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Mon Jun 10 09:26:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 09:26:01 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:08:58 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:08:58 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 719.00
[Mon Jun 10 10:08:58 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src50_bgd.pi.gz = 400.00
[Mon Jun 10 10:08:58 2013] Got source and background scale factors 1180350.000000, 4462675.000000
[Mon Jun 10 10:08:58 2013] User source parameters:
  Position = (282.0, 327.0) = 18 22 20.62 64 21 34.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 613.2 +/- 27.8
  Background aperture counts = 105.8
  Rate = 1 +/- 0.05

[Mon Jun 10 10:08:58 2013] Updating counts from extracted products
[Mon Jun 10 10:08:58 2013] Set source signif. to 613.20/10.29 = 59.62
[Mon Jun 10 10:09:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:06 2013] Using photon index=1.80, rate=1.18, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src50.arf
[Mon Jun 10 10:09:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:06 2013] Updating source flux to 3.9e-12
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete