[Sun Jun  9 18:58:37 2013] Detection parameters:
  Position = (221.9, 329.1) = 18 23 0.88 64 21 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.0 +/- 20.3
  Background counts = 116.9
  Rate = 0.1 +/- 0.02

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 5.98'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 9.42"
[Sun Jun  9 19:01:40 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.267
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 9.42"
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src48.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src48.csv
[Mon Jun 10 00:31:17 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src48_1.ximg exists
[Mon Jun 10 00:31:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src48.csv
[Mon Jun 10 00:31:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src48.csv
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src48.csv
[Mon Jun 10 00:31:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Spatial fit model total counts = 1062.170000, observed total counts = 935.000000
[Mon Jun 10 00:38:11 2013] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 43
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 9.42"
[Mon Jun 10 00:38:22 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.267
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 9.42"
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src42.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src42.csv
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src42.csv
[Mon Jun 10 07:53:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src42.csv
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src42.csv
[Mon Jun 10 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Warning, spatial fit 42 centroid is now closest to src. 53
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:13 2013] XMMSAS src. selection expression = ellipse(19257.775192, 28586.986603, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src49_src.reg
[Mon Jun 10 08:01:13 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (184, 292) - (259, 367)
[Mon Jun 10 08:01:13 2013] XMMSAS bgd. selection expression = annulus(19257.775192, 28586.986603, 1087.500000, 2175.000000, X, Y) && !ellipse(15517.540000, 31542.724000, 1649.080047, 1649.080047, 0.000000, X, Y) && !ellipse(16580.608000, 30845.238000, 1772.176051, 1772.176051, 0.000000, X, Y) && !ellipse(18485.448000, 30481.007000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(17609.440079, 30498.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19857.102921, 30077.363403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19314.795600, 30392.026000, 1542.408044, 1542.408044, 0.000000, X, Y) && !ellipse(19244.910000, 29886.468000, 1578.328045, 1578.328045, 0.000000, X, Y) && !ellipse(21028.246964, 29692.336365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18724.650620, 29627.505859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.719406, 29344.787720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(16728.975281, 29460.523102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.844971, 29007.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21683.451111, 29355.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21094.661194, 29276.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.016541, 29349.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19064.940414, 29008.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.252670, 28889.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.612411, 28328.007080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.172638, 28164.547546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.862213, 27961.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.623016, 27714.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19056.221298, 27732.672516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.795425, 27543.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.751251, 26755.935028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:13 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src49.gif
[Mon Jun 10 08:28:01 2013] Mean detx,y = (-8251.95, 879.93) 
[Mon Jun 10 08:28:03 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:28:22 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:28:23 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon Jun 10 08:28:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Mon Jun 10 09:25:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 09:25:52 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:08:58 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:08:58 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 677.00
[Mon Jun 10 10:08:58 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src49_bgd.pi.gz = 732.00
[Mon Jun 10 10:08:58 2013] Got source and background scale factors 1236962.000000, 1341153.000000
[Mon Jun 10 10:08:58 2013] User source parameters:
  Position = (221.9, 329.1) = 18 23 0.88 64 21 42.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1.9 +/- 27.0
  Background aperture counts = 675.1
  Rate = 0.004 +/- 0.05

[Mon Jun 10 10:08:58 2013] Updating counts from extracted products
[Mon Jun 10 10:08:58 2013] Set source signif. to 1.87/25.98 = 0.07
[Mon Jun 10 10:09:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:06 2013] Using photon index=1.80, rate=0.00358, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src49.arf
[Mon Jun 10 10:09:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:06 2013] Updating source flux to 1.6e-14
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete