[Sun Jun  9 18:58:37 2013] Detection parameters:
  Position = (242.3, 341.8) = 18 22 47.26 64 22 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.8 +/- 19.7
  Background counts = 79.1
  Rate = 0.1 +/- 0.02

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 5.15'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Sun Jun  9 19:01:40 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 9.00"
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src31.ximg exists
[Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src31.csv
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src31.csv
[Mon Jun 10 00:31:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Jun 10 00:31:19 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Jun 10 00:31:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Jun 10 00:31:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Warning, spatial fit 31 centroid is now closest to src. 26
[Mon Jun 10 00:38:11 2013] Source 32 is offset by 0.264333 and -3.913651 pixels which is larger than
2 X fitted extent = 1.000115 x 1.000115, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 41
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Mon Jun 10 00:38:22 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 9.00"
[Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src28.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src28.csv
[Mon Jun 10 07:53:49 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Jun 10 07:53:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src28.csv
[Mon Jun 10 07:53:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src28.csv
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src28.csv
[Mon Jun 10 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Warning, spatial fit 28 centroid is now closest to src. 26
[Mon Jun 10 08:01:00 2013] Source 32 is offset by 6.104172 and -0.749766 pixels which is larger than
2 X fitted extent = 1.020506 x 1.020506, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:12 2013] XMMSAS src. selection expression = ellipse(21028.246964, 29692.336365, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:12 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src32_src.reg
[Mon Jun 10 08:01:12 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (205, 304) - (280, 379)
[Mon Jun 10 08:01:12 2013] XMMSAS bgd. selection expression = annulus(21028.246964, 29692.336365, 1087.500000, 2175.000000, X, Y) && !ellipse(18485.448000, 30481.007000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(19857.102921, 30077.363403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19314.795600, 30392.026000, 1542.408044, 1542.408044, 0.000000, X, Y) && !ellipse(19244.910000, 29886.468000, 1578.328045, 1578.328045, 0.000000, X, Y) && !ellipse(18724.650620, 29627.505859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.719406, 29344.787720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(22046.844971, 29007.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21683.451111, 29355.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21094.661194, 29276.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.016541, 29349.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19064.940414, 29008.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22523.186432, 28748.375214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23354.794708, 28583.155396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19257.775192, 28586.986603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.612411, 28328.007080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.172638, 28164.547546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.862213, 27961.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.915039, 28053.962921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23150.545959, 28145.582672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.623016, 27714.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19056.221298, 27732.672516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23867.443695, 27529.047699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23059.170471, 27543.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.795425, 27543.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.361420, 27176.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.930634, 27153.236267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.751251, 26755.935028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:12 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src32.gif
[Mon Jun 10 08:22:12 2013] Mean detx,y = (-6826.13, -564.92) 
[Mon Jun 10 08:22:14 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:22:37 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:22:37 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Jun 10 08:22:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Jun 10 09:22:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 09:22:03 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:08:55 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:08:55 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 582.00
[Mon Jun 10 10:08:55 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src32_bgd.pi.gz = 82.00
[Mon Jun 10 10:08:55 2013] Got source and background scale factors 1094234.000000, 2546659.000000
[Mon Jun 10 10:08:55 2013] User source parameters:
  Position = (242.3, 341.8) = 18 22 47.26 64 22 42.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 546.8 +/- 25.1
  Background aperture counts = 35.2
  Rate = 1 +/- 0.05

[Mon Jun 10 10:08:55 2013] Updating counts from extracted products
[Mon Jun 10 10:08:55 2013] Set source signif. to 546.77/5.94 = 92.11
[Mon Jun 10 10:09:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:06 2013] Using photon index=1.80, rate=1.05, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src32.arf
[Mon Jun 10 10:09:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:06 2013] Updating source flux to 4.6e-12
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete