[Sun Jun  9 18:58:37 2013] Detection parameters:
  Position = (228.8, 346.3) = 18 22 56.30 64 23 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.2 +/- 17.0
  Background counts = 80.3
  Rate = 0.07 +/- 0.008

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 6.13'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Sun Jun  9 19:01:40 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.869
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.49"
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src26.csv
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src26.csv
[Mon Jun 10 00:31:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jun 10 00:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jun 10 00:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 10 00:31:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Spatial fit model total counts = 191461.000000, observed total counts = 595.000000
[Mon Jun 10 00:38:11 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 00:38:11 2013] Source 26 is offset by -5.024748 and 1.633818 pixels which is larger than
2 X fitted extent = 1.034726 x 1.034726, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Source 26 is offset by -0.890587 and 4.893051 pixels which is larger than
2 X fitted extent = 1.099407 x 1.099407, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 30
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Mon Jun 10 00:38:22 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.869
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 9.49"
[Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src24.ximg exists
[Mon Jun 10 07:53:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src24.csv
[Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Jun 10 07:53:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src24.csv
[Mon Jun 10 07:53:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon Jun 10 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Warning, spatial fit 24 centroid is now closest to src. 41
[Mon Jun 10 08:01:00 2013] Source 26 is offset by -4.987346 and 1.491108 pixels which is larger than
2 X fitted extent = 1.057223 x 1.057223, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Source 26 is offset by -4.882035 and -1.407777 pixels which is larger than
2 X fitted extent = 1.085255 x 1.085255, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:12 2013] XMMSAS src. selection expression = ellipse(19857.102921, 30077.363403, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:12 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src26_src.reg
[Mon Jun 10 08:01:12 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (191, 309) - (266, 384)
[Mon Jun 10 08:01:12 2013] XMMSAS bgd. selection expression = annulus(19857.102921, 30077.363403, 1087.500000, 2175.000000, X, Y) && !ellipse(16580.608000, 30845.238000, 1772.176051, 1772.176051, 0.000000, X, Y) && !ellipse(18485.448000, 30481.007000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(17609.440079, 30498.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19314.795600, 30392.026000, 1542.408044, 1542.408044, 0.000000, X, Y) && !ellipse(19244.910000, 29886.468000, 1578.328045, 1578.328045, 0.000000, X, Y) && !ellipse(21028.246964, 29692.336365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18724.650620, 29627.505859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.719406, 29344.787720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(22046.844971, 29007.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21683.451111, 29355.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21094.661194, 29276.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.016541, 29349.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19064.940414, 29008.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.252670, 28889.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22523.186432, 28748.375214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19257.775192, 28586.986603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.612411, 28328.007080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.172638, 28164.547546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.862213, 27961.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.623016, 27714.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19056.221298, 27732.672516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.795425, 27543.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.361420, 27176.916473, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:12 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src26.gif
[Mon Jun 10 08:19:49 2013] Mean detx,y = (-8168.84, -548.45) 
[Mon Jun 10 08:19:51 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:20:13 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:20:14 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jun 10 08:20:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Jun 10 09:15:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 09:15:31 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:08:54 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:08:54 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 451.00
[Mon Jun 10 10:08:54 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src26_bgd.pi.gz = 38.00
[Mon Jun 10 10:08:54 2013] Got source and background scale factors 882298.000000, 1270247.000000
[Mon Jun 10 10:08:54 2013] User source parameters:
  Position = (228.8, 346.3) = 18 22 56.30 64 23 1.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 424.6 +/- 22.3
  Background aperture counts = 26.4
  Rate = 0.8 +/- 0.04

[Mon Jun 10 10:08:54 2013] Updating counts from extracted products
[Mon Jun 10 10:08:54 2013] Set source signif. to 424.61/5.14 = 82.65
[Mon Jun 10 10:09:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:06 2013] Using photon index=1.80, rate=0.815, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src26.arf
[Mon Jun 10 10:09:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:06 2013] Updating source flux to 4.1e-12
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete