[Sun Jun  9 18:58:37 2013] Detection parameters:
  Position = (176.2, 352.0) = 18 23 31.57 64 23 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.8 +/- 20.7
  Background counts = 100.7
  Rate = 0.05 +/- 0.01

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 9.67'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 11.27"
[Sun Jun  9 19:01:40 2013] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.838
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 11.27"
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src25.ximg exists
[Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src25.csv
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src25.csv
[Mon Jun 10 00:31:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Jun 10 00:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jun 10 00:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 10 00:31:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Source 25 is offset by -3.346854 and 2.136109 pixels which is larger than
2 X fitted extent = 1.324239 x 1.323172, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Warning, spatial fit 25 centroid is now closest to src. 15
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 15
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 11.27"
[Mon Jun 10 00:38:22 2013] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.838
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 11.27"
[Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src23.ximg exists
[Mon Jun 10 07:53:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src23.csv
[Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Jun 10 07:53:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src23.csv
[Mon Jun 10 07:53:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Jun 10 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Warning, spatial fit 23 centroid is now closest to src. 11
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:12 2013] XMMSAS src. selection expression = ellipse(15284.251709, 30576.535461, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:12 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src25_src.reg
[Mon Jun 10 08:01:12 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (139, 315) - (214, 390)
[Mon Jun 10 08:01:12 2013] XMMSAS bgd. selection expression = annulus(15284.251709, 30576.535461, 1087.500000, 2175.000000, X, Y) && !ellipse(12634.349200, 32257.832820, 756.237622, 756.237622, 0.000000, X, Y) && !ellipse(14064.009537, 31863.611359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13602.334000, 31853.200800, 1965.320057, 1144.296033, 223.452000, X, Y) && !ellipse(14322.496552, 31357.265411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13730.731674, 31465.768494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12440.842000, 31524.720000, 1954.048056, 1954.048056, 0.000000, X, Y) && !ellipse(15517.540000, 31542.724000, 1649.080047, 1649.080047, 0.000000, X, Y) && !ellipse(13005.657776, 31019.543030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15994.482666, 31013.245300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14773.863480, 31459.831848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16580.608000, 30845.238000, 1772.176051, 1772.176051, 0.000000, X, Y) && !ellipse(14728.311142, 30780.529327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18485.448000, 30481.007000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(13475.410782, 30415.332703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17609.440079, 30498.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14828.400436, 29763.464600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.719406, 29344.787720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(16728.975281, 29460.523102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.252670, 28889.460815, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:12 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src25.gif
[Mon Jun 10 08:19:26 2013] Mean detx,y = (-12524.72, 146.43) 
[Mon Jun 10 08:19:28 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:19:44 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:19:44 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Jun 10 08:19:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon Jun 10 09:15:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 09:15:20 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:08:54 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:08:54 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 505.00
[Mon Jun 10 10:08:54 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src25_bgd.pi.gz = 206.00
[Mon Jun 10 10:08:54 2013] Got source and background scale factors 1064842.000000, 483208.000000
[Mon Jun 10 10:08:54 2013] User source parameters:
  Position = (176.2, 352.0) = 18 23 31.57 64 23 21.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 51.0 +/- 23.5
  Background aperture counts = 454.0
  Rate = 0.1 +/- 0.05

[Mon Jun 10 10:08:54 2013] Updating counts from extracted products
[Mon Jun 10 10:08:54 2013] Set source signif. to 51.04/21.31 = 2.40
[Mon Jun 10 10:09:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:06 2013] Using photon index=1.80, rate=0.098, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src25.arf
[Mon Jun 10 10:09:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:06 2013] Updating source flux to 7.3e-13
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete