[Sun Jun  9 18:58:37 2013] Detection parameters:
  Position = (203.0, 351.1) = 18 23 13.64 64 23 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.9 +/- 21.2
  Background counts = 87.7
  Rate = 0.08 +/- 0.01

[Sun Jun  9 18:58:39 2013] Off-axis axis estimate = 7.91'
[Sun Jun  9 19:01:40 2013] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 10.38"
[Sun Jun  9 19:01:40 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.080
[Sun Jun  9 19:01:40 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.38"
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src24.ximg exists
[Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src24.csv
[Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src24.csv
[Mon Jun 10 00:31:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Jun 10 00:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jun 10 00:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Mon Jun 10 00:31:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:11 2013] Source 24 is offset by 0.993173 and 2.082037 pixels which is larger than
2 X fitted extent = 1.246455 x 1.246455, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Source 24 is offset by -2.782666 and 0.325079 pixels which is larger than
2 X fitted extent = 1.255572 x 1.255572, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Warning, spatial fit 24 centroid is now closest to src. 22
[Mon Jun 10 00:38:11 2013] Source 24 is offset by 0.523035 and 4.916336 pixels which is larger than
2 X fitted extent = 1.250510 x 1.250510, not incorporating fit results
[Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:11 2013] Assessing source extent using major
[Mon Jun 10 00:38:11 2013] Source does appear to be extended
[Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 00:38:11 2013] Source is confused with source 21
[Mon Jun 10 00:38:22 2013] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 10.38"
[Mon Jun 10 00:38:22 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.080
[Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 10.38"
[Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src22.ximg exists
[Mon Jun 10 07:53:48 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src22.csv
[Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Jun 10 07:53:48 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src22.csv
[Mon Jun 10 07:53:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Jun 10 07:53:51 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Jun 10 07:53:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:00 2013] Warning, spatial fit 22 centroid is now closest to src. 34
[Mon Jun 10 08:01:00 2013] Source 24 is offset by 6.986300 and -5.868147 pixels which is larger than
2 X fitted extent = 1.247315 x 1.247315, not incorporating fit results
[Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:00 2013] Assessing source extent using major
[Mon Jun 10 08:01:00 2013] Source does appear to be extended
[Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 08:01:12 2013] XMMSAS src. selection expression = ellipse(17609.440079, 30498.103241, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 08:01:12 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src24_src.reg
[Mon Jun 10 08:01:12 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (165, 314) - (240, 389)
[Mon Jun 10 08:01:12 2013] XMMSAS bgd. selection expression = annulus(17609.440079, 30498.103241, 1087.500000, 2175.000000, X, Y) && !ellipse(13602.334000, 31853.200800, 1965.320057, 1144.296033, 223.452000, X, Y) && !ellipse(15517.540000, 31542.724000, 1649.080047, 1649.080047, 0.000000, X, Y) && !ellipse(15994.482666, 31013.245300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14773.863480, 31459.831848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16580.608000, 30845.238000, 1772.176051, 1772.176051, 0.000000, X, Y) && !ellipse(14728.311142, 30780.529327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18485.448000, 30481.007000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(15284.251709, 30576.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19857.102921, 30077.363403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19314.795600, 30392.026000, 1542.408044, 1542.408044, 0.000000, X, Y) && !ellipse(19244.910000, 29886.468000, 1578.328045, 1578.328045, 0.000000, X, Y) && !ellipse(14828.400436, 29763.464600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18724.650620, 29627.505859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.719406, 29344.787720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(16728.975281, 29460.523102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.016541, 29349.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19064.940414, 29008.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.252670, 28889.460815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19257.775192, 28586.986603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.172638, 28164.547546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19056.221298, 27732.672516, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 08:01:12 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src24.gif
[Mon Jun 10 08:19:03 2013] Mean detx,y = (-10332.82, -431.23) 
[Mon Jun 10 08:19:05 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 08:19:21 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 08:19:22 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Jun 10 08:19:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Jun 10 09:15:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 09:15:12 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:08:54 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:08:54 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 692.00
[Mon Jun 10 10:08:54 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src24_bgd.pi.gz = 0.00
[Mon Jun 10 10:08:54 2013] Got source and background scale factors 1268896.000000, 0.000000
[Mon Jun 10 10:08:54 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon Jun 10 10:09:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:06 2013] Using photon index=1.80, rate=0.0799, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src24.arf
[Mon Jun 10 10:09:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:06 2013] Updating source flux to 4.3e-13
[Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete