[Sun Jun 9 18:58:37 2013] Detection parameters: Position = (170.4, 362.2) = 18 23 35.54 64 24 4.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 143.9 +/- 19.6 Background counts = 82.4 Rate = 0.07 +/- 0.01 [Sun Jun 9 18:58:39 2013] Off-axis axis estimate = 10.37' [Sun Jun 9 19:01:40 2013] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 11.61" [Sun Jun 9 19:01:40 2013] source mask rpix=2.7, npix_max = 40, mask sum = 39, frac = 0.970 [Sun Jun 9 19:01:40 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 11.61" [Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src18.ximg exists [Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src18.csv [Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src18_1.ximg exists [Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src18.csv [Mon Jun 10 00:31:16 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Mon Jun 10 00:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src18.csv [Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Mon Jun 10 00:31:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src18.csv [Mon Jun 10 00:31:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 00:38:11 2013] Source 18 is offset by -2.119937 and 3.771929 pixels which is larger than 2 X fitted extent = 1.373991 x 7.228552, not incorporating fit results [Mon Jun 10 00:38:11 2013] Warning, spatial fit 18 centroid is now closest to src. 15 [Mon Jun 10 00:38:11 2013] Vigneting correction estimate = 1.000000 [Mon Jun 10 00:38:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 10 00:38:11 2013] Assessing source extent using major [Mon Jun 10 00:38:11 2013] Source does appear to be extended [Mon Jun 10 00:38:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 00:38:11 2013] Source is confused with source 15 [Mon Jun 10 00:38:22 2013] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting [Mon Jun 10 00:38:22 2013] Initial guess for spatial extent in simple fitting = 11.61" [Mon Jun 10 00:38:22 2013] source mask rpix=2.7, npix_max = 40, mask sum = 39, frac = 0.970 [Mon Jun 10 00:38:22 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 11.61" [Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src16.ximg exists [Mon Jun 10 07:53:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src16.csv [Mon Jun 10 07:53:48 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src16_1.ximg exists [Mon Jun 10 07:53:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src16.csv [Mon Jun 10 07:53:48 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src16_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 07:53:50 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists [Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src16.csv [Mon Jun 10 07:53:51 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists [Mon Jun 10 07:53:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src16.csv [Mon Jun 10 07:53:51 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 08:01:00 2013] Source 18 is offset by -2.119937 and 0.768182 pixels which is larger than 2 X fitted extent = 1.373991 x 6.079402, not incorporating fit results [Mon Jun 10 08:01:00 2013] Spatial fit model total counts = 1472.850000, observed total counts = 1289.000000 [Mon Jun 10 08:01:00 2013] Poor agreement between spatial fit and data for source 18 It may help to tweak spatial fit manually Not incorporating fit results [Mon Jun 10 08:01:00 2013] Spatial fit model total counts = 762.102000, observed total counts = 640.000000 [Mon Jun 10 08:01:00 2013] Poor agreement between spatial fit and data for source 18 It may help to tweak spatial fit manually Not incorporating fit results [Mon Jun 10 08:01:00 2013] Vigneting correction estimate = 1.000000 [Mon Jun 10 08:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 10 08:01:00 2013] Assessing source extent using major [Mon Jun 10 08:01:00 2013] Source does appear to be extended [Mon Jun 10 08:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 08:01:11 2013] XMMSAS src. selection expression = ellipse(14773.863480, 31459.831848, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 10 08:01:11 2013] Writing source region out to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src18_src.reg [Mon Jun 10 08:01:11 2013] Extracting stamp from image fullrun_pn_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (133, 325) - (208, 400) [Mon Jun 10 08:01:11 2013] XMMSAS bgd. selection expression = annulus(14773.863480, 31459.831848, 1087.500000, 2175.000000, X, Y) && !ellipse(11932.627800, 32276.877200, 1110.728032, 1110.728032, 0.000000, X, Y) && !ellipse(12634.349200, 32257.832820, 756.237622, 756.237622, 0.000000, X, Y) && !ellipse(14064.009537, 31863.611359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13602.334000, 31853.200800, 1965.320057, 1144.296033, 223.452000, X, Y) && !ellipse(14322.496552, 31357.265411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13730.731674, 31465.768494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12440.842000, 31524.720000, 1954.048056, 1954.048056, 0.000000, X, Y) && !ellipse(15517.540000, 31542.724000, 1649.080047, 1649.080047, 0.000000, X, Y) && !ellipse(13005.657776, 31019.543030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15994.482666, 31013.245300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16580.608000, 30845.238000, 1772.176051, 1772.176051, 0.000000, X, Y) && !ellipse(14728.311142, 30780.529327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18485.448000, 30481.007000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(17329.750000, 30543.691260, 3269.856094, 3269.856094, 0.000000, X, Y) && !ellipse(13475.410782, 30415.332703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17609.440079, 30498.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15284.251709, 30576.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14828.400436, 29763.464600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17232.108000, 29143.364000, 1640.424047, 1640.424047, 0.000000, X, Y) && !ellipse(16728.975281, 29460.523102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.252670, 28889.460815, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 10 08:01:11 2013] Writing fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src18.gif [Mon Jun 10 08:10:20 2013] Mean detx,y = (-13423.13, -469.11) [Mon Jun 10 08:10:22 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 10 08:10:43 2013] Binned source spectrum to 10 counts/bin [Mon Jun 10 08:10:43 2013] Setting source spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Mon Jun 10 08:10:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src18_bgd.pi.gz [Mon Jun 10 09:03:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 10 09:03:39 2013] rmf not generated due to insufficient counts [Mon Jun 10 10:08:53 2013] Updating aperture counts using extracted products [Mon Jun 10 10:08:53 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 473.00 [Mon Jun 10 10:08:53 2013] Total counts from fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src18_bgd.pi.gz = 33.00 [Mon Jun 10 10:08:53 2013] Got source and background scale factors 934720.000000, 493350.000000 [Mon Jun 10 10:08:53 2013] User source parameters: Position = (170.4, 362.2) = 18 23 35.54 64 24 4.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 410.5 +/- 22.8 Background aperture counts = 62.5 Rate = 0.8 +/- 0.04 [Mon Jun 10 10:08:53 2013] Updating counts from extracted products [Mon Jun 10 10:08:53 2013] Set source signif. to 410.48/7.91 = 51.91 [Mon Jun 10 10:09:06 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 10:09:06 2013] Using photon index=1.80, rate=0.788, arf fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src18.arf [Mon Jun 10 10:09:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 10:09:06 2013] Updating source flux to 6e-12 [Mon Jun 10 10:09:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 10 10:09:19 2013] xmm0110950501/analysis//spectral/fullrun_pn_xmm0110950501_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete