[Sun Jun 9 18:58:36 2013] Detection parameters: Position = (192.3, 358.1) = 18 23 20.84 64 23 50.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 157.0 +/- 18.7 Background counts = 82.9 Rate = 0.08 +/- 0.009 [Sun Jun 9 18:58:39 2013] Off-axis axis estimate = 8.83' [Sun Jun 9 19:01:40 2013] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 19:01:40 2013] Initial guess for spatial extent in simple fitting = 10.84" [Sun Jun 9 19:01:40 2013] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.949 [Sun Jun 9 19:01:40 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.84" [Mon Jun 10 00:31:15 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src14.ximg exists [Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src14.csv [Mon Jun 10 00:31:16 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src14_1.ximg exists [Mon Jun 10 00:31:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src14.csv [Mon Jun 10 00:31:16 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists [Mon Jun 10 00:31:18 2013] fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists [Mon Jun 10 00:31:18 2013] Fit fullrun_pn_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly [Mon Jun 10 00:38:11 2013] Warning, spatial fit 14 centroid is now closest to src. 24 [Mon Jun 10 00:38:11 2013] Spatial fit model total counts = 969.291000, observed total counts = 885.000000 [Mon Jun 10 00:38:11 2013] Offset between fit and detection position for source 14 = 0.648379 pixels [Mon Jun 10 00:38:11 2013] Warning, changing simple spatial fit ID from 14 to 19 [Mon Jun 10 00:38:11 2013] 960.911000 total counts/ 942.777000 bgd. counts: snr = 0.590594 Spatial fit parameters: Offset between fit and detection position for source 14 = 0.648379 pixels Position = (192.7, 358.6) = 18 23 20.54 64 23 49.8 Extent = 2.8 (2.7-7.2)", rotation angle = 0 Source counts = 18.1 +/- 31.0 Background counts = 942.8 Rate = 0.03 +/- 0.06 Deleting source due to low Poisson probability