[Sun Jun  9 18:59:03 2013] Detection parameters:
  Position = (316.8, 313.9) = 18 21 57.30 64 20 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14160.1 +/- 142.9
  Background counts = 196.6
  Rate = 3 +/- 0.03

[Sun Jun  9 18:59:03 2013] Off-axis axis estimate = 1.74'
[Mon Jun 10 00:33:38 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 00:33:38 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Jun 10 00:33:38 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Mon Jun 10 00:33:38 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Mon Jun 10 00:37:48 2013] fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 10 00:37:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_src1.csv
[Mon Jun 10 00:37:49 2013] fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 10 00:37:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_src1.csv
[Mon Jun 10 00:37:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:37:49 2013] fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 10 00:37:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 10 00:37:49 2013] fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 10 00:37:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 10 00:37:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110950501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 00:38:12 2013] Source 1 is offset by 6.484506 and -7.596931 pixels which is larger than
2 X fitted extent = 3.159058 x 1.841058, not incorporating fit results
[Mon Jun 10 00:38:12 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 00:38:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 00:38:12 2013] Assessing source extent using major
[Mon Jun 10 00:38:12 2013] Source does appear to be extended
[Mon Jun 10 00:38:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 07:56:12 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 07:56:12 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Jun 10 07:56:12 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Mon Jun 10 07:56:12 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Mon Jun 10 08:00:41 2013] fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 10 08:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_src1.csv
[Mon Jun 10 08:00:41 2013] fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 10 08:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_src1.csv
[Mon Jun 10 08:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:00:41 2013] fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 10 08:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 10 08:00:41 2013] fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 10 08:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 10 08:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110950501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 08:01:01 2013] Source 1 is offset by 6.484506 and -7.553138 pixels which is larger than
2 X fitted extent = 2.821127 x 1.806446, not incorporating fit results
[Mon Jun 10 08:01:01 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 08:01:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 08:01:01 2013] Assessing source extent using major
[Mon Jun 10 08:01:01 2013] Source does appear to be extended
[Mon Jun 10 08:01:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 09:59:24 2013] Counts = 14160.059570, rescaling region sizes by 3.000000
[Mon Jun 10 09:59:24 2013] XMMSAS src. selection expression = ellipse(27510.881989, 27257.108978, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon Jun 10 09:59:24 2013] Writing source region out to fullrun_mos2_xmm0110950501_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 09:59:24 2013] Extracting stamp from image fullrun_mos2_xmm0110950501_pi300-10000_cl_sm2.00.img.gz, (204, 201) - (429, 426)
[Mon Jun 10 09:59:24 2013] XMMSAS bgd. selection expression = annulus(27510.881989, 27257.108978, 9787.500000, 19575.000000, X, Y) && !ellipse(16835.468506, 25990.843201, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 09:59:24 2013] Writing fullrun_mos2_xmm0110950501_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 09:59:41 2013] Mean detx,y = (80.25, 88.41) 
[Mon Jun 10 09:59:45 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 10:07:26 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 10:07:26 2013] Setting source spectrum file to fullrun_mos2_xmm0110950501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 10:07:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110950501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 10:07:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 10:07:42 2013] rmf not generated due to insufficient counts
[Mon Jun 10 10:09:07 2013] Updating aperture counts using extracted products
[Mon Jun 10 10:09:07 2013] Total counts from fullrun_mos2_xmm0110950501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 16957.00
[Mon Jun 10 10:09:07 2013] Total counts from fullrun_mos2_xmm0110950501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 310594.00
[Mon Jun 10 10:09:07 2013] Got source and background scale factors 4249031.000000, 567820959.000000
[Mon Jun 10 10:09:07 2013] User source parameters:
  Position = (316.8, 313.9) = 18 21 57.30 64 20 35.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 14632.8 +/- 131.2
  Background aperture counts = 2324.2
  Rate = 3 +/- 0.03

[Mon Jun 10 10:09:07 2013] Updating counts from extracted products
[Mon Jun 10 10:09:07 2013] Set source signif. to 14632.81/48.21 = 303.52
[Mon Jun 10 10:09:08 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 10:09:08 2013] Using photon index=1.80, rate=3.3, arf fullrun_mos2_xmm0110950501_pi300-10000_pass1_cl_src1.arf
[Mon Jun 10 10:09:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 10:09:08 2013] Updating source flux to 3.3e-11
[Mon Jun 10 10:09:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 10:09:11 2013] xmm0110950501/analysis//spectral/fullrun_mos2_xmm0110950501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete