[Sun Jun 24 07:50:31 2012] Detection parameters:
  Position = (299.4, 321.1) = 13 9 47.08 8 19 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11079.1 +/- 125.7
  Background counts = 38.1
  Rate = 1 +/- 0.01

[Sun Jun 24 07:50:32 2012] Off-axis axis estimate = 1.64'
[Sun Jun 24 07:52:10 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 07:52:10 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jun 24 07:52:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Sun Jun 24 07:52:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sun Jun 24 08:13:13 2012] fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 24 08:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 08:13:13 2012] fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 24 08:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 08:13:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 08:13:14 2012] fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 24 08:13:14 2012] fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 24 08:13:14 2012] Fit fullrun_pn_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 24 08:58:58 2012] Spatial fit model total counts = 8880.560000, observed total counts = 8789.000000
[Sun Jun 24 08:58:58 2012] Offset between fit and detection position for source 1 = 0.107408 pixels
[Sun Jun 24 08:58:58 2012] 8884.700000 total counts/ 1895.120000 bgd. counts: snr = 160.558286
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.107408 pixels
  Position = (299.3, 321.2) = 13 9 47.11 8 19 47.8
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 6989.6 +/- 94.3
  Background counts = 1895.1
  Rate = 0.7 +/- 0.009
[Sun Jun 24 08:58:58 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 08:58:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 08:58:58 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 08:58:58 2012] Source does appear to be extended
[Sun Jun 24 08:58:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 08:59:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 08:59:11 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Sun Jun 24 08:59:11 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.189
[Sun Jun 24 08:59:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.80"
[Sun Jun 24 09:16:44 2012] fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 24 09:16:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 09:16:44 2012] fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 24 09:16:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 09:16:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 09:16:45 2012] fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 24 09:16:45 2012] fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 24 09:16:45 2012] Fit fullrun_pn_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 24 10:00:02 2012] Spatial fit model total counts = 8881.910000, observed total counts = 8789.000000
[Sun Jun 24 10:00:02 2012] Offset between fit and detection position for source 1 = 0.000065 pixels
[Sun Jun 24 10:00:02 2012] 8886.090000 total counts/ 1896.870000 bgd. counts: snr = 160.475940
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000065 pixels
  Position = (299.3, 321.2) = 13 9 47.11 8 19 47.8
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 6989.2 +/- 94.3
  Background counts = 1896.9
  Rate = 0.7 +/- 0.009
[Sun Jun 24 10:00:02 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 10:00:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 10:00:02 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 10:00:02 2012] Source does appear to be extended
[Sun Jun 24 10:00:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 10:00:22 2012] Counts = 6989.220000, rescaling region sizes by 2.000000
[Sun Jun 24 10:00:22 2012] XMMSAS src. selection expression = ellipse(25990.180800, 27891.655200, 695.877620, 695.877620, 0.000000, X, Y)
[Sun Jun 24 10:00:22 2012] Writing source region out to fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 24 10:00:22 2012] Extracting stamp from image fullrun_pn_xmm0110950401_pi300-10000_cl_sm2.00.img.gz, (259, 281) - (339, 361)
[Sun Jun 24 10:00:22 2012] XMMSAS bgd. selection expression = annulus(25990.180800, 27891.655200, 2319.592067, 4639.184133, X, Y) && !ellipse(21443.583817, 29474.124817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29963.327240, 29277.801331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30952.339400, 28432.960200, 426.349612, 426.349612, 0.000000, X, Y)
[Sun Jun 24 10:00:22 2012] Writing fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1.gif
[Sun Jun 24 10:00:35 2012] Mean detx,y = (-53.28, -226.56) 
[Sun Jun 24 10:00:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 10:02:05 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 10:02:06 2012] Setting source spectrum file to fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 10:02:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 24 11:04:36 2012] Updating aperture counts using extracted products
[Sun Jun 24 11:04:36 2012] Error reading totcts from fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 11:04:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 11:04:37 2012] Using photon index=1.80, rate=0.68, arf fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 11:04:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 11:04:37 2012] Updating source flux to 1.6e-12
[Sun Jun 24 11:06:51 2012] Reading fit data from xmm0110950401/analysis//spectral/fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 24 11:06:51 2012] Spectral fit parameter nH value = 3.31321e+12
[Sun Jun 24 11:06:51 2012] Spectral fit parameter PhoIndex value = 1.75892
[Sun Jun 24 11:06:51 2012] Failed to get F(0.3-8.0) from xmm0110950401/analysis//spectral/fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 24 11:06:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 11:06:51 2012] Using Nh = 3.3e+12, photon index=1.76, rate=0.68, arf fullrun_pn_xmm0110950401_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 11:06:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 11:06:51 2012] Updating source flux to 1.7e-12