[Sun Jun 24 07:51:11 2012] Detection parameters:
  Position = (405.0, 316.2) = 13 9 16.13 8 19 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.4 +/- 9.0
  Background counts = 8.0
  Rate = 0.005 +/- 0.0009

[Sun Jun 24 07:51:11 2012] Off-axis axis estimate = 7.83'
[Sun Jun 24 08:28:06 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 08:28:06 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sun Jun 24 08:28:06 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.086
[Sun Jun 24 08:28:06 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.34"
[Sun Jun 24 08:58:53 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 24 08:58:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src9.csv
[Sun Jun 24 08:58:53 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 24 08:58:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src9.csv
[Sun Jun 24 08:58:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 08:58:53 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 24 08:58:53 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 24 08:58:53 2012] Fit fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Jun 24 08:59:03 2012] Warning, spatial fit 9 centroid is now closest to src. 3
[Sun Jun 24 08:59:03 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 08:59:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 08:59:03 2012] Assessing source extent using major
[Sun Jun 24 08:59:03 2012] Source does appear to be extended
[Sun Jun 24 08:59:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 09:30:40 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 09:30:40 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sun Jun 24 09:30:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.086
[Sun Jun 24 09:30:40 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.34"
[Sun Jun 24 09:59:56 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 24 09:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src9.csv
[Sun Jun 24 09:59:56 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 24 09:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src9.csv
[Sun Jun 24 09:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 09:59:56 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 24 09:59:56 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 24 09:59:56 2012] Fit fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Jun 24 10:00:10 2012] Spatial fit model total counts = 102.000000, observed total counts = 102.000000
[Sun Jun 24 10:00:10 2012] Offset between fit and detection position for source 15 = 0.142495 pixels
[Sun Jun 24 10:00:10 2012] 103.292800 total counts/ 80.824800 bgd. counts: snr = 2.499149
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.142495 pixels
  Position = (404.9, 316.2) = 13 9 16.17 8 19 26.0
  Extent = 5.0 (3.3-7.7)", rotation angle = 0
  Source counts = 22.5 +/- 10.2
  Background counts = 80.8
  Rate = 0.002 +/- 0.0008
[Sun Jun 24 10:00:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 10:00:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 10:00:10 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 10:00:10 2012] Source does appear to be extended
[Sun Jun 24 10:00:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 10:44:59 2012] XMMSAS src. selection expression = ellipse(35174.977140, 27457.289000, 299.497024, 299.497024, 0.000000, X, Y)
[Sun Jun 24 10:44:59 2012] Writing source region out to fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src15_src.reg
[Sun Jun 24 10:44:59 2012] Extracting stamp from image fullrun_mos2_xmm0110950401_pi300-10000_cl_sm2.00.img.gz, (388, 299) - (422, 333)
[Sun Jun 24 10:44:59 2012] XMMSAS bgd. selection expression = annulus(35174.977140, 27457.289000, 499.161707, 998.323414, X, Y) && !ellipse(33438.933167, 28751.258575, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 10:44:59 2012] Writing fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src15.gif
[Sun Jun 24 10:47:44 2012] Mean detx,y = (-7709.09, -4609.55) 
[Sun Jun 24 10:47:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 10:47:57 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 10:47:58 2012] Setting source spectrum file to fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jun 24 10:47:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Jun 24 11:02:18 2012] Not generating rmf since there are only 22 counts
[Sun Jun 24 11:02:18 2012] rmf not generated due to insufficient counts
[Sun Jun 24 11:04:39 2012] Updating aperture counts using extracted products
[Sun Jun 24 11:04:40 2012] Error reading totcts from fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jun 24 11:04:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 11:04:41 2012] Using photon index=1.80, rate=0.0017, arf fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src15.arf
[Sun Jun 24 11:04:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 11:04:41 2012] Updating source flux to 3.3e-14
[Sun Jun 24 11:04:55 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting