[Sun Jun 24 07:51:11 2012] Detection parameters:
  Position = (226.1, 439.7) = 13 10 8.57 8 28 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.2 +/- 8.0
  Background counts = 6.7
  Rate = 0.003 +/- 0.0006

[Sun Jun 24 07:51:11 2012] Off-axis axis estimate = 11.51'
[Sun Jun 24 08:28:06 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 08:28:06 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Sun Jun 24 08:28:06 2012] source mask rpix=2.8, npix_max = 43, mask sum = 30, frac = 0.689
[Sun Jun 24 08:28:06 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.18"
[Sun Jun 24 08:58:53 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun 24 08:58:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src19.csv
[Sun Jun 24 08:58:53 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun 24 08:58:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src19.csv
[Sun Jun 24 08:58:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 08:58:54 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun 24 08:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 24 08:58:54 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun 24 08:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 24 08:58:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 08:59:03 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.550118 pixels away
[Sun Jun 24 08:59:03 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 08:59:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 08:59:03 2012] Assessing source extent using major
[Sun Jun 24 08:59:03 2012] Source does appear to be extended
[Sun Jun 24 08:59:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 09:30:40 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 09:30:40 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Sun Jun 24 09:30:40 2012] source mask rpix=2.8, npix_max = 43, mask sum = 30, frac = 0.689
[Sun Jun 24 09:30:40 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 12.18"
[Sun Jun 24 09:59:56 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun 24 09:59:56 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun 24 09:59:56 2012] Fit fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_src19 appears to have run properly
[Sun Jun 24 09:59:56 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun 24 09:59:56 2012] fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun 24 09:59:56 2012] Fit fullrun_mos2_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Jun 24 10:00:10 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.093939 pixels away
[Sun Jun 24 10:00:10 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 10:00:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 10:00:10 2012] Assessing source extent using major
[Sun Jun 24 10:00:10 2012] Source does appear to be extended
[Sun Jun 24 10:00:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 10:44:59 2012] XMMSAS src. selection expression = ellipse(19620.476089, 38205.366547, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 10:44:59 2012] Writing source region out to fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 24 10:44:59 2012] Extracting stamp from image fullrun_mos2_xmm0110950401_pi300-10000_cl_sm2.00.img.gz, (189, 402) - (264, 477)
[Sun Jun 24 10:44:59 2012] XMMSAS bgd. selection expression = annulus(19620.476089, 38205.366547, 1087.500000, 2175.000000, X, Y) && !ellipse(20842.196176, 39660.013967, 761.324945, 283.618668, 338.313074, X, Y)
[Sun Jun 24 10:44:59 2012] Writing fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src10.gif
[Sun Jun 24 10:52:28 2012] Mean detx,y = (927.97, 12192.22) 
[Sun Jun 24 10:52:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 10:52:54 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 10:52:54 2012] Setting source spectrum file to fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 10:52:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 24 11:03:48 2012] Not generating rmf since there are only 35 counts
[Sun Jun 24 11:03:48 2012] rmf not generated due to insufficient counts
[Sun Jun 24 11:04:40 2012] Updating aperture counts using extracted products
[Sun Jun 24 11:04:40 2012] Error reading totcts from fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 11:04:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 11:04:41 2012] Using photon index=1.80, rate=0.00257, arf fullrun_mos2_xmm0110950401_pi300-10000_pass1_cl_src10.arf
[Sun Jun 24 11:04:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 11:04:41 2012] Updating source flux to 6e-14
[Sun Jun 24 11:04:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting