[Sun Jun 24 07:50:51 2012] Detection parameters:
  Position = (299.5, 321.0) = 13 9 47.05 8 19 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3804.0 +/- 73.8
  Background counts = 8.3
  Rate = 0.3 +/- 0.006

[Sun Jun 24 07:50:51 2012] Off-axis axis estimate = 1.64'
[Sun Jun 24 08:13:14 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 08:13:14 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jun 24 08:13:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Sun Jun 24 08:13:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sun Jun 24 08:28:05 2012] fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 24 08:28:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 08:28:05 2012] fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 24 08:28:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 08:28:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 08:28:05 2012] fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 24 08:28:05 2012] fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 24 08:28:05 2012] Fit fullrun_mos1_xmm0110950401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 24 08:59:00 2012] Spatial fit model total counts = 3345.860000, observed total counts = 3258.000000
[Sun Jun 24 08:59:00 2012] Offset between fit and detection position for source 1 = 0.127685 pixels
[Sun Jun 24 08:59:00 2012] 3333.554000 total counts/ 880.124000 bgd. counts: snr = 82.699282
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.127685 pixels
  Position = (299.4, 321.1) = 13 9 47.09 8 19 47.6
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 2453.4 +/- 57.7
  Background counts = 880.1
  Rate = 0.2 +/- 0.004
[Sun Jun 24 08:59:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 08:59:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 08:59:00 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 08:59:00 2012] Source does appear to be extended
[Sun Jun 24 08:59:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 09:16:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 09:16:45 2012] Initial guess for spatial extent in simple fitting = 5.28"
[Sun Jun 24 09:16:45 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.022
[Sun Jun 24 09:16:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.28"
[Sun Jun 24 09:30:40 2012] fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 24 09:30:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 09:30:40 2012] fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 24 09:30:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 09:30:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 09:30:40 2012] fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 24 09:30:40 2012] fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 24 09:30:40 2012] Fit fullrun_mos1_xmm0110950401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 24 10:00:05 2012] Spatial fit model total counts = 3342.100000, observed total counts = 3258.000000
[Sun Jun 24 10:00:05 2012] Offset between fit and detection position for source 1 = 0.000443 pixels
[Sun Jun 24 10:00:05 2012] 3329.800000 total counts/ 881.770000 bgd. counts: snr = 82.440207
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000443 pixels
  Position = (299.4, 321.1) = 13 9 47.09 8 19 47.6
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 2448.0 +/- 57.7
  Background counts = 881.8
  Rate = 0.2 +/- 0.004
[Sun Jun 24 10:00:05 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 10:00:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 10:00:05 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 10:00:05 2012] Source does appear to be extended
[Sun Jun 24 10:00:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 10:32:22 2012] Counts = 2448.030000, rescaling region sizes by 2.000000
[Sun Jun 24 10:32:22 2012] XMMSAS src. selection expression = ellipse(25995.871000, 27886.810400, 631.916418, 631.916418, 0.000000, X, Y)
[Sun Jun 24 10:32:22 2012] Writing source region out to fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 24 10:32:22 2012] Extracting stamp from image fullrun_mos1_xmm0110950401_pi300-10000_cl_sm2.00.img.gz, (263, 285) - (336, 357)
[Sun Jun 24 10:32:22 2012] XMMSAS bgd. selection expression = annulus(25995.871000, 27886.810400, 2106.388061, 4212.776121, X, Y)
[Sun Jun 24 10:32:22 2012] Writing fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1.gif
[Sun Jun 24 10:32:26 2012] Mean detx,y = (290.38, -365.32) 
[Sun Jun 24 10:32:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 10:32:55 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 10:32:55 2012] Setting source spectrum file to fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 10:32:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 24 11:04:38 2012] Updating aperture counts using extracted products
[Sun Jun 24 11:04:38 2012] Error reading totcts from fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 11:04:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 11:04:38 2012] Using photon index=1.80, rate=0.187, arf fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 11:04:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 11:04:38 2012] Updating source flux to 1.8e-12
[Sun Jun 24 11:04:55 2012] Reading fit data from xmm0110950401/analysis//spectral/fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 24 11:04:55 2012] Spectral fit parameter nH value = 3.08807e+12
[Sun Jun 24 11:04:55 2012] Spectral fit parameter PhoIndex value = 1.62134
[Sun Jun 24 11:04:55 2012] Failed to get F(0.3-8.0) from xmm0110950401/analysis//spectral/fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 24 11:04:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 11:04:55 2012] Using Nh = 3.1e+12, photon index=1.62, rate=0.187, arf fullrun_mos1_xmm0110950401_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 11:04:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 11:04:55 2012] Updating source flux to 2e-12