[Sat Jun 16 13:08:30 2012] Detection parameters:
  Position = (317.1, 312.2) = 1 21 51.26 -28 20 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25404.6 +/- 189.4
  Background counts = 17.2
  Rate = 4 +/- 0.03

[Sat Jun 16 13:08:30 2012] Off-axis axis estimate = 1.68'
[Sat Jun 16 13:09:50 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 13:09:50 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Jun 16 13:09:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat Jun 16 13:09:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat Jun 16 13:23:28 2012] fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 13:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 13:23:28 2012] fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 13:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 13:23:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 13:23:28 2012] fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 13:23:28 2012] fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 13:23:28 2012] Fit fullrun_pn_xmm0110950201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 13:38:24 2012] Spatial fit model total counts = 20578.600000, observed total counts = 20439.000000
[Sat Jun 16 13:38:24 2012] Offset between fit and detection position for source 1 = 0.227635 pixels
[Sat Jun 16 13:38:24 2012] 20645.560000 total counts/ 3973.060000 bgd. counts: snr = 264.507606
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.227635 pixels
  Position = (316.9, 312.3) = 1 21 51.32 -28 20 58.1
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 16672.5 +/- 143.7
  Background counts = 3973.1
  Rate = 3 +/- 0.02
[Sat Jun 16 13:38:24 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 13:38:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 13:38:24 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 13:38:24 2012] Source does appear to be extended
[Sat Jun 16 13:38:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 13:38:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 13:38:30 2012] Initial guess for spatial extent in simple fitting = 5.90"
[Sat Jun 16 13:38:30 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.159
[Sat Jun 16 13:38:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.90"
[Sat Jun 16 13:53:23 2012] fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 13:53:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 13:53:23 2012] fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 13:53:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 13:53:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 13:53:23 2012] fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 13:53:23 2012] fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 13:53:23 2012] Fit fullrun_pn_xmm0110950201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 13:58:33 2012] Spatial fit model total counts = 20578.600000, observed total counts = 20439.000000
[Sat Jun 16 13:58:33 2012] Offset between fit and detection position for source 1 = 0.000129 pixels
[Sat Jun 16 13:58:33 2012] 20645.710000 total counts/ 3976.310000 bgd. counts: snr = 264.350326
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000129 pixels
  Position = (316.9, 312.3) = 1 21 51.32 -28 20 58.1
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 16669.4 +/- 143.7
  Background counts = 3976.3
  Rate = 3 +/- 0.02
[Sat Jun 16 13:58:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 13:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 13:58:33 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 13:58:33 2012] Source does appear to be extended
[Sat Jun 16 13:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 13:58:37 2012] Counts = 16669.400000, rescaling region sizes by 3.000000
[Sat Jun 16 13:58:37 2012] XMMSAS src. selection expression = ellipse(27523.015360, 27122.714200, 1062.295231, 1062.295231, 0.000000, X, Y)
[Sat Jun 16 13:58:37 2012] Writing source region out to fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 16 13:58:37 2012] Extracting stamp from image fullrun_pn_xmm0110950201_pi300-10000_cl_sm2.00.img.gz, (256, 251) - (378, 373)
[Sat Jun 16 13:58:38 2012] XMMSAS bgd. selection expression = annulus(27523.015360, 27122.714200, 5311.476153, 10622.952306, X, Y) && !ellipse(23956.960580, 31842.721800, 454.447805, 454.447805, 0.000000, X, Y) && !ellipse(22215.019836, 29547.541687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23537.022644, 26315.571869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23736.460480, 36955.986755, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 16 13:58:38 2012] Writing fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1.gif
[Sat Jun 16 13:58:47 2012] Mean detx,y = (26.12, -215.40) 
[Sat Jun 16 13:58:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 14:02:40 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 14:02:40 2012] Setting source spectrum file to fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 14:02:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 14:44:25 2012] Updating aperture counts using extracted products
[Sat Jun 16 14:44:25 2012] Error reading totcts from fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 14:44:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 14:44:25 2012] Using photon index=1.80, rate=2.77, arf fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 14:44:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 14:44:25 2012] Updating source flux to 6.3e-12
[Sat Jun 16 14:45:09 2012] Reading fit data from xmm0110950201/analysis//spectral/fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 16 14:45:09 2012] Spectral fit parameter nH value = 2.13356e+13
[Sat Jun 16 14:45:09 2012] Spectral fit parameter PhoIndex value = 2.65865
[Sat Jun 16 14:45:09 2012] Failed to get F(0.3-8.0) from xmm0110950201/analysis//spectral/fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 14:45:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 14:45:09 2012] Using Nh = 2.1e+13, photon index=2.66, rate=2.77, arf fullrun_pn_xmm0110950201_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 14:45:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 14:45:09 2012] Updating source flux to 4e-12