[Thu Aug 23 21:59:35 2012] Detection parameters:
  Position = (251.8, 469.0) = 10 32 6.09 -14 2 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.3 +/- 6.5
  Background counts = 2.0
  Rate = 0.004 +/- 0.0009

[Thu Aug 23 21:59:35 2012] Off-axis axis estimate = 12.82'
[Thu Aug 23 22:17:45 2012] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 22:17:45 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Thu Aug 23 22:17:45 2012] source mask rpix=3.0, npix_max = 47, mask sum = 34, frac = 0.714
[Thu Aug 23 22:17:45 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.84"
[Thu Aug 23 22:28:22 2012] fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Aug 23 22:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src6.csv
[Thu Aug 23 22:28:22 2012] fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Aug 23 22:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src6.csv
[Thu Aug 23 22:28:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:28:22 2012] fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Aug 23 22:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug 23 22:28:22 2012] fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Aug 23 22:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug 23 22:28:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:50:05 2012] Spatial fit model total counts = 62.614100, observed total counts = 35.000000
[Thu Aug 23 22:50:05 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 22:50:05 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 22:50:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 22:50:05 2012] Assessing source extent using major
[Thu Aug 23 22:50:05 2012] Source does appear to be extended
[Thu Aug 23 22:50:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 22:50:05 2012] Deleting source due to low Poisson probability 0.8