[Thu Aug 23 21:59:35 2012] Detection parameters:
  Position = (113.0, 351.9) = 10 32 47.61 -14 11 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 10.3
  Background counts = 1.7
  Rate = 0.009 +/- 0.001

[Thu Aug 23 21:59:35 2012] Off-axis axis estimate = 13.99'
[Thu Aug 23 22:17:45 2012] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 22:17:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 23 22:17:45 2012] Initial guess for spatial extent in simple fitting = 13.43"
[Thu Aug 23 22:17:45 2012] source mask rpix=3.1, npix_max = 51, mask sum = 54, frac = 1.050
[Thu Aug 23 22:17:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.43"
[Thu Aug 23 22:28:22 2012] fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug 23 22:28:22 2012] fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug 23 22:28:22 2012] Fit fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Aug 23 22:28:22 2012] fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug 23 22:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Aug 23 22:28:22 2012] fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug 23 22:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Aug 23 22:28:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110950101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 22:50:05 2012] Spatial fit model total counts = 83.897500, observed total counts = 83.000000
[Thu Aug 23 22:50:05 2012] Offset between fit and detection position for source 2 = 0.481406 pixels
[Thu Aug 23 22:50:05 2012] 85.166400 total counts/ 72.974600 bgd. counts: snr = 1.427191
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.481406 pixels
  Position = (112.5, 351.9) = 10 32 47.76 -14 11 21.3
  Extent = 3.2" x 3.2", rotation angle = 29
  Source counts = 12.2 +/- 9.2
  Background counts = 73.0
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability