[Mon Jun 18 19:36:43 2012] Detection parameters:
  Position = (191.4, 370.3) = 13 39 4.33 28 12 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 345.2 +/- 24.1
  Background counts = 34.3
  Rate = 0.02 +/- 0.002

[Mon Jun 18 19:36:43 2012] Off-axis axis estimate = 9.35'
[Mon Jun 18 20:20:04 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 20:20:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 20:20:04 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Mon Jun 18 20:20:04 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Mon Jun 18 20:20:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.10"
[Mon Jun 18 20:41:00 2012] fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 20:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 20:41:00 2012] fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 20:41:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 20:41:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 20:41:00 2012] fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 20:41:00 2012] fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 20:41:00 2012] Fit fullrun_mos1_xmm0110940101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 18 20:59:21 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Mon Jun 18 20:59:21 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 20:59:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 20:59:21 2012] Assessing source extent using major
[Mon Jun 18 20:59:21 2012] Source does appear to be extended
[Mon Jun 18 20:59:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 21:41:32 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 21:41:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 21:41:32 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Mon Jun 18 21:41:32 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Mon Jun 18 21:41:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.10"
[Mon Jun 18 22:04:21 2012] fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 22:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 22:04:21 2012] fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 22:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 22:04:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 22:04:21 2012] fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 22:04:21 2012] fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 22:04:21 2012] Fit fullrun_mos1_xmm0110940101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 18 22:22:48 2012] Spatial fit model total counts = 373.672000, observed total counts = 376.000000
[Mon Jun 18 22:22:48 2012] Offset between fit and detection position for source 3 = 0.163855 pixels
[Mon Jun 18 22:22:48 2012] 374.630000 total counts/ 169.804000 bgd. counts: snr = 15.718501
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.163855 pixels
  Position = (191.3, 370.5) = 13 39 4.35 28 12 38.9
  Extent = 6.2 (5.4-7.0)", rotation angle = 0
  Source counts = 204.8 +/- 19.4
  Background counts = 169.8
  Rate = 0.01 +/- 0.001
[Mon Jun 18 22:22:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 22:22:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 22:22:48 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 22:22:48 2012] Source does appear to be extended
[Mon Jun 18 22:22:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 22:53:07 2012] XMMSAS src. selection expression = ellipse(16596.511400, 32183.923600, 369.857411, 369.857411, 0.000000, X, Y)
[Mon Jun 18 22:53:07 2012] Writing source region out to fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 18 22:53:07 2012] Extracting stamp from image fullrun_mos1_xmm0110940101_pi300-10000_cl_sm2.00.img.gz, (170, 349) - (213, 392)
[Mon Jun 18 22:53:07 2012] XMMSAS bgd. selection expression = annulus(16596.511400, 32183.923600, 616.429018, 1232.858035, X, Y)
[Mon Jun 18 22:53:07 2012] Writing fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3.gif
[Mon Jun 18 22:53:09 2012] Mean detx,y = (-10516.00, 5189.16) 
[Mon Jun 18 22:53:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 22:53:18 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 22:53:18 2012] Setting source spectrum file to fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 18 22:53:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 18 23:13:44 2012] Updating aperture counts using extracted products
[Mon Jun 18 23:13:44 2012] Error reading totcts from fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 18 23:13:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 23:13:44 2012] Using photon index=1.80, rate=0.0102, arf fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3.arf
[Mon Jun 18 23:13:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 23:13:44 2012] Updating source flux to 2.2e-13
[Mon Jun 18 23:13:58 2012] Reading fit data from xmm0110940101/analysis//spectral/fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3_pl.csv
[Mon Jun 18 23:13:58 2012] Spectral fit parameter nH value = 3.60908e+19
[Mon Jun 18 23:13:58 2012] Spectral fit parameter PhoIndex value = 1.60636
[Mon Jun 18 23:13:58 2012] Failed to get F(0.3-8.0) from xmm0110940101/analysis//spectral/fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Jun 18 23:13:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 23:13:58 2012] Using Nh = 3.6e+19, photon index=1.61, rate=0.0102, arf fullrun_mos1_xmm0110940101_pi300-10000_pass1_cl_src3.arf
[Mon Jun 18 23:13:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 23:13:58 2012] Updating source flux to 2.4e-13