[Sat Oct 15 10:06:31 2011] Detection parameters:
  Position = (296.3, 275.1) = 12 25 46.78 12 39 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5556.9 +/- 88.6
  Background counts = 11.4
  Rate = 0.5 +/- 0.008

[Sat Oct 15 10:06:32 2011] Off-axis axis estimate = 1.70'
[Sat Oct 15 11:12:06 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 11:12:06 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Oct 15 11:12:06 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Oct 15 11:12:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Oct 15 11:42:39 2011] fullrun_mos2_xmm0110930701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Oct 15 11:42:39 2011] fullrun_mos2_xmm0110930701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Oct 15 11:42:39 2011] Fit fullrun_mos2_xmm0110930701_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Oct 15 11:42:39 2011] fullrun_mos2_xmm0110930701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 11:42:39 2011] fullrun_mos2_xmm0110930701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 11:42:39 2011] Fit fullrun_mos2_xmm0110930701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 11:42:55 2011] Spatial fit model total counts = 5054.000000, observed total counts = 5054.000000
[Sat Oct 15 11:42:55 2011] Offset between fit and detection position for source 2 = 0.088082 pixels
[Sat Oct 15 11:42:55 2011] 5079.510000 total counts/ 1132.110000 bgd. counts: snr = 117.318587
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.088082 pixels
  Position = (296.2, 275.2) = 12 25 46.78 12 39 43.9
  Extent = 5.9 (5.7-6.0)", rotation angle = 0
  Source counts = 3947.4 +/- 71.3
  Background counts = 1132.1
  Rate = 0.3 +/- 0.006
[Sat Oct 15 11:42:55 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 11:42:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 11:42:55 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 11:42:55 2011] Source does appear to be extended
[Sat Oct 15 11:42:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:36:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:36:06 2011] Initial guess for spatial extent in simple fitting = 5.87"
[Sat Oct 15 12:36:06 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.169
[Sat Oct 15 12:36:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.87"
[Sat Oct 15 12:59:23 2011] fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Oct 15 12:59:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_src1.csv
[Sat Oct 15 12:59:23 2011] fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Oct 15 12:59:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_src1.csv
[Sat Oct 15 12:59:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:59:23 2011] fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 12:59:23 2011] fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 12:59:23 2011] Fit fullrun_mos2_xmm0110930701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 12:59:31 2011] Spatial fit model total counts = 5054.010000, observed total counts = 5054.000000
[Sat Oct 15 12:59:31 2011] Offset between fit and detection position for source 2 = 0.000057 pixels
[Sat Oct 15 12:59:31 2011] 5079.510000 total counts/ 1131.970000 bgd. counts: snr = 117.330003
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000057 pixels
  Position = (296.2, 275.2) = 12 25 46.78 12 39 43.9
  Extent = 5.9 (5.7-6.0)", rotation angle = 0
  Source counts = 3947.5 +/- 71.3
  Background counts = 1132.0
  Rate = 0.3 +/- 0.006
[Sat Oct 15 12:59:31 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:59:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:59:31 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:59:31 2011] Source does appear to be extended
[Sat Oct 15 12:59:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 13:33:14 2011] Counts = 3947.540000, rescaling region sizes by 2.000000
[Sat Oct 15 13:33:14 2011] XMMSAS src. selection expression = ellipse(25725.195200, 23894.027400, 704.660420, 704.660420, 0.000000, X, Y)
[Sat Oct 15 13:33:14 2011] Writing source region out to fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2_src.reg
[Sat Oct 15 13:33:14 2011] Extracting stamp from image fullrun_mos2_xmm0110930701_pi300-10000_cl_sm2.00.img.gz, (256, 235) - (337, 316)
[Sat Oct 15 13:33:14 2011] XMMSAS bgd. selection expression = annulus(25725.195200, 23894.027400, 2348.868068, 4697.736135, X, Y) && !ellipse(25617.912282, 19851.099600, 314.544009, 314.544009, 0.000000, X, Y) && !ellipse(29253.125600, 21895.763600, 538.319215, 182.753605, 342.940124, X, Y) && !ellipse(26903.071400, 26078.228000, 355.612810, 355.612810, 0.000000, X, Y) && !ellipse(27868.869841, 24439.003619, 749.606505, 414.194938, 359.115163, X, Y)
[Sat Oct 15 13:33:14 2011] Writing fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2.gif
[Sat Oct 15 13:33:18 2011] Mean detx,y = (127.97, 93.13) 
[Sat Oct 15 13:33:19 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 13:33:35 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 13:33:36 2011] Setting source spectrum file to fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Oct 15 13:33:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Oct 15 13:44:00 2011] Updating aperture counts using extracted products
[Sat Oct 15 13:44:00 2011] Error reading totcts from fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Oct 15 13:44:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 13:44:00 2011] Using photon index=1.80, rate=0.338, arf fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2.arf
[Sat Oct 15 13:44:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 13:44:01 2011] Updating source flux to 3.7e-12
[Sat Oct 15 13:45:46 2011] Reading fit data from xmm0110930701/analysis//spectral/fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2_pl.csv
[Sat Oct 15 13:45:46 2011] Spectral fit parameter nH value = 2.59411e+23
[Sat Oct 15 13:45:46 2011] Spectral fit parameter PhoIndex value = 1.27291
[Sat Oct 15 13:45:46 2011] Failed to get F(0.3-8.0) from xmm0110930701/analysis//spectral/fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 13:45:46 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 13:45:46 2011] Using Nh = 2.6e+23, photon index=1.27, rate=0.338, arf fullrun_mos2_xmm0110930701_pi300-10000_pass1_cl_src2.arf
[Sat Oct 15 13:45:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 13:45:46 2011] Updating source flux to 1.5e-11