[Sat Oct 15 10:06:29 2011] Detection parameters:
  Position = (296.2, 275.1) = 12 25 46.80 12 39 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5414.9 +/- 89.0
  Background counts = 12.6
  Rate = 0.5 +/- 0.008

[Sat Oct 15 10:06:29 2011] Off-axis axis estimate = 1.70'
[Sat Oct 15 10:42:54 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 10:42:54 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Oct 15 10:42:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Oct 15 10:42:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Oct 15 11:12:06 2011] fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Oct 15 11:12:06 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_src1.csv
[Sat Oct 15 11:12:06 2011] fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Oct 15 11:12:06 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_src1.csv
[Sat Oct 15 11:12:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 11:12:06 2011] fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 11:12:06 2011] fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 11:12:06 2011] Fit fullrun_mos1_xmm0110930701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 11:42:50 2011] Spatial fit model total counts = 4955.390000, observed total counts = 4963.000000
[Sat Oct 15 11:42:50 2011] Offset between fit and detection position for source 1 = 0.102101 pixels
[Sat Oct 15 11:42:50 2011] 4964.220000 total counts/ 1230.800000 bgd. counts: snr = 106.417513
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.102101 pixels
  Position = (296.2, 275.2) = 12 25 46.78 12 39 43.8
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 3733.4 +/- 70.5
  Background counts = 1230.8
  Rate = 0.3 +/- 0.006
[Sat Oct 15 11:42:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 11:42:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 11:42:50 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 11:42:50 2011] Source does appear to be extended
[Sat Oct 15 11:42:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:14:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:14:29 2011] Initial guess for spatial extent in simple fitting = 5.84"
[Sat Oct 15 12:14:29 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.178
[Sat Oct 15 12:14:29 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Sat Oct 15 12:36:06 2011] fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Oct 15 12:36:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_src1.csv
[Sat Oct 15 12:36:06 2011] fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Oct 15 12:36:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_src1.csv
[Sat Oct 15 12:36:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:36:06 2011] fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 12:36:06 2011] fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 12:36:06 2011] Fit fullrun_mos1_xmm0110930701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 12:59:29 2011] Spatial fit model total counts = 4955.400000, observed total counts = 4963.000000
[Sat Oct 15 12:59:29 2011] Offset between fit and detection position for source 1 = 0.000007 pixels
[Sat Oct 15 12:59:29 2011] 4964.230000 total counts/ 1230.810000 bgd. counts: snr = 106.417081
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000007 pixels
  Position = (296.2, 275.2) = 12 25 46.78 12 39 43.8
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 3733.4 +/- 70.5
  Background counts = 1230.8
  Rate = 0.3 +/- 0.006
[Sat Oct 15 12:59:29 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:59:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:59:29 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:59:29 2011] Source does appear to be extended
[Sat Oct 15 12:59:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 13:21:29 2011] Counts = 3733.420000, rescaling region sizes by 2.000000
[Sat Oct 15 13:21:29 2011] XMMSAS src. selection expression = ellipse(25723.810600, 23892.150800, 701.029220, 701.029220, 0.000000, X, Y)
[Sat Oct 15 13:21:29 2011] Writing source region out to fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1_src.reg
[Sat Oct 15 13:21:29 2011] Extracting stamp from image fullrun_mos1_xmm0110930701_pi300-10000_cl_sm2.00.img.gz, (256, 235) - (337, 315)
[Sat Oct 15 13:21:29 2011] XMMSAS bgd. selection expression = annulus(25723.810600, 23892.150800, 2336.764067, 4673.528134, X, Y) && !ellipse(27901.482400, 24409.166600, 459.451213, 459.451213, 0.000000, X, Y) && !ellipse(26911.029413, 26110.529474, 476.641294, 274.026003, 37.508249, X, Y) && !ellipse(29219.821400, 21878.681800, 276.829608, 276.829608, 0.000000, X, Y) && !ellipse(26197.823975, 22946.541473, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct 15 13:21:29 2011] Writing fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1.gif
[Sat Oct 15 13:21:33 2011] Mean detx,y = (313.81, -290.10) 
[Sat Oct 15 13:21:34 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 13:22:01 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 13:22:01 2011] Setting source spectrum file to fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Oct 15 13:22:01 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Oct 15 13:43:59 2011] Updating aperture counts using extracted products
[Sat Oct 15 13:43:59 2011] Error reading totcts from fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Oct 15 13:43:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 13:43:59 2011] Using photon index=1.80, rate=0.32, arf fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1.arf
[Sat Oct 15 13:43:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 13:43:59 2011] Updating source flux to 3.1e-12
[Sat Oct 15 13:44:53 2011] Reading fit data from xmm0110930701/analysis//spectral/fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1_pl.csv
[Sat Oct 15 13:44:53 2011] Spectral fit parameter nH value = 2.80683e+23
[Sat Oct 15 13:44:53 2011] Spectral fit parameter PhoIndex value = 1.54911
[Sat Oct 15 13:44:53 2011] Failed to get F(0.3-8.0) from xmm0110930701/analysis//spectral/fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 13:44:53 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 13:44:53 2011] Using Nh = 2.8e+23, photon index=1.55, rate=0.32, arf fullrun_mos1_xmm0110930701_pi300-10000_pass1_cl_src1.arf
[Sat Oct 15 13:44:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 13:44:53 2011] Updating source flux to 1.3e-11