[Sat Sep 24 10:08:19 2011] Detection parameters:
  Position = (374.0, 403.0) = 13 10 28.85 37 12 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.9 +/- 6.9
  Background counts = 2.8
  Rate = 0.002 +/- 0.0005

[Sat Sep 24 10:08:19 2011] Off-axis axis estimate = 9.35'
[Sat Sep 24 11:29:40 2011] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:29:40 2011] Initial guess for spatial extent in simple fitting = 11.10"
[Sat Sep 24 11:29:40 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Sat Sep 24 11:29:40 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 11.10"
[Sat Sep 24 12:13:52 2011] fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_src25.ximg exists
[Sat Sep 24 12:13:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_src25.csv
[Sat Sep 24 12:13:52 2011] fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Sep 24 12:13:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_src25.csv
[Sat Sep 24 12:13:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 12:13:53 2011] fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Sep 24 12:13:53 2011] fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Sep 24 12:13:53 2011] Fit fullrun_mos2_xmm0110930501_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Sep 24 12:14:06 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.140242 pixels away
[Sat Sep 24 12:14:06 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 12:14:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 12:14:06 2011] Assessing source extent using major
[Sat Sep 24 12:14:06 2011] Source does appear to be extended
[Sat Sep 24 12:14:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 13:21:08 2011] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 13:21:08 2011] Initial guess for spatial extent in simple fitting = 11.10"
[Sat Sep 24 13:21:08 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Sat Sep 24 13:21:08 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 11.10"
[Sat Sep 24 13:57:32 2011] fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_src22.ximg exists
[Sat Sep 24 13:57:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_src22.csv
[Sat Sep 24 13:57:32 2011] fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Sep 24 13:57:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_src22.csv
[Sat Sep 24 13:57:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 13:57:33 2011] fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Sep 24 13:57:33 2011] fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Sep 24 13:57:33 2011] Fit fullrun_mos2_xmm0110930501_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Sep 24 13:57:47 2011] Spatial fit model total counts = 57.000000, observed total counts = 57.000000
[Sat Sep 24 13:57:47 2011] Offset between fit and detection position for source 11 = 0.240665 pixels
[Sat Sep 24 13:57:47 2011] 57.347900 total counts/ 40.917600 bgd. counts: snr = 2.568564
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.240665 pixels
  Position = (373.7, 402.9) = 13 10 28.94 37 12 51.5
  Extent = 4.1 (2.8-5.9)", rotation angle = 0
  Source counts = 16.4 +/- 7.6
  Background counts = 40.9
  Rate = 0.001 +/- 0.0006
[Sat Sep 24 13:57:47 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 13:57:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 13:57:47 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 13:57:47 2011] Source does appear to be extended
[Sat Sep 24 13:57:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:52:27 2011] XMMSAS src. selection expression = ellipse(32465.323800, 35007.896800, 247.028407, 247.028407, 0.000000, X, Y)
[Sat Sep 24 14:52:27 2011] Writing source region out to fullrun_mos2_xmm0110930501_pi300-10000_pass1_cl_src11_src.reg
[Sat Sep 24 14:52:27 2011] Extracting stamp from image fullrun_mos2_xmm0110930501_pi300-10000_cl_sm2.00.img.gz, (360, 389) - (388, 417)
[Sat Sep 24 14:52:27 2011] XMMSAS bgd. selection expression = annulus(32465.323800, 35007.896800, 411.714012, 823.428024, X, Y)
[Sat Sep 24 14:52:27 2011] Writing fullrun_mos2_xmm0110930501_pi300-10000_pass1_cl_src11.gif
[Sat Sep 24 14:56:43 2011] Mean detx,y = (11764.71, -5312.10) 
[Sat Sep 24 14:56:44 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 14:56:50 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 14:56:51 2011] Setting source spectrum file to fullrun_mos2_xmm0110930501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Sep 24 14:56:51 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110930501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Sep 24 15:01:23 2011] Not generating rmf since there are only 16 counts
[Sat Sep 24 15:01:23 2011] rmf not generated due to insufficient counts
[Sat Sep 24 15:01:41 2011] Updating aperture counts using extracted products
[Sat Sep 24 15:01:41 2011] Error reading totcts from fullrun_mos2_xmm0110930501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Sep 24 15:01:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 15:01:42 2011] Using photon index=1.80, rate=0.00124, arf fullrun_mos2_xmm0110930501_pi300-10000_pass1_cl_src11.arf
[Sat Sep 24 15:01:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 15:01:42 2011] Updating source flux to 4.8e-14
[Sat Sep 24 15:01:49 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting