[Sat Sep 24 10:07:55 2011] Detection parameters:
  Position = (298.8, 274.2) = 13 10 56.22 37 3 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 838.8 +/- 34.7
  Background counts = 5.2
  Rate = 0.06 +/- 0.003

[Sat Sep 24 10:07:56 2011] Off-axis axis estimate = 1.75'
[Sat Sep 24 10:57:00 2011] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 10:57:00 2011] Initial guess for spatial extent in simple fitting = 7.31"
[Sat Sep 24 10:57:00 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sat Sep 24 10:57:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Sat Sep 24 11:29:40 2011] fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep 24 11:29:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 11:29:40 2011] fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep 24 11:29:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 11:29:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 11:29:40 2011] fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 11:29:40 2011] fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 11:29:40 2011] Fit fullrun_mos1_xmm0110930501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 12:14:02 2011] Spatial fit model total counts = 1092.620000, observed total counts = 1089.000000
[Sat Sep 24 12:14:02 2011] Offset between fit and detection position for source 2 = 0.337428 pixels
[Sat Sep 24 12:14:02 2011] 1091.071000 total counts/ 525.148000 bgd. counts: snr = 24.695424
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.337428 pixels
  Position = (298.9, 274.6) = 13 10 56.19 37 3 33.2
  Extent = 6.3 (5.8-7.0)", rotation angle = 0
  Source counts = 565.9 +/- 33.0
  Background counts = 525.1
  Rate = 0.04 +/- 0.002
[Sat Sep 24 12:14:02 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 12:14:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 12:14:02 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 12:14:02 2011] Source does appear to be extended
[Sat Sep 24 12:14:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 12:56:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 12:56:13 2011] Initial guess for spatial extent in simple fitting = 6.27"
[Sat Sep 24 12:56:13 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.061
[Sat Sep 24 12:56:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.27"
[Sat Sep 24 13:21:07 2011] fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 13:21:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 13:21:07 2011] fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 13:21:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 13:21:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 13:21:08 2011] fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 13:21:08 2011] fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 13:21:08 2011] Fit fullrun_mos1_xmm0110930501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 13:57:43 2011] Spatial fit model total counts = 1091.930000, observed total counts = 1089.000000
[Sat Sep 24 13:57:43 2011] Offset between fit and detection position for source 2 = 0.000646 pixels
[Sat Sep 24 13:57:43 2011] 1090.365000 total counts/ 524.219000 bgd. counts: snr = 24.727036
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000646 pixels
  Position = (298.9, 274.6) = 13 10 56.19 37 3 33.2
  Extent = 6.3 (5.8-7.0)", rotation angle = 0
  Source counts = 566.1 +/- 33.0
  Background counts = 524.2
  Rate = 0.04 +/- 0.002
[Sat Sep 24 13:57:43 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 13:57:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 13:57:43 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 13:57:43 2011] Source does appear to be extended
[Sat Sep 24 13:57:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:43:49 2011] XMMSAS src. selection expression = ellipse(25954.912900, 23838.433400, 377.074211, 377.074211, 0.000000, X, Y)
[Sat Sep 24 14:43:49 2011] Writing source region out to fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2_src.reg
[Sat Sep 24 14:43:49 2011] Extracting stamp from image fullrun_mos1_xmm0110930501_pi300-10000_cl_sm2.00.img.gz, (277, 253) - (321, 296)
[Sat Sep 24 14:43:49 2011] XMMSAS bgd. selection expression = annulus(25954.912900, 23838.433400, 628.457018, 1256.914036, X, Y) && !ellipse(24909.827000, 24028.685400, 665.224819, 232.194407, 3.204835, X, Y)
[Sat Sep 24 14:43:49 2011] Writing fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2.gif
[Sat Sep 24 14:43:51 2011] Mean detx,y = (306.29, -200.64) 
[Sat Sep 24 14:43:52 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 14:43:58 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 14:43:58 2011] Setting source spectrum file to fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Sep 24 14:43:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Sep 24 15:01:40 2011] Updating aperture counts using extracted products
[Sat Sep 24 15:01:40 2011] Error reading totcts from fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Sep 24 15:01:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 15:01:41 2011] Using photon index=1.80, rate=0.0428, arf fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2.arf
[Sat Sep 24 15:01:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 15:01:41 2011] Updating source flux to 4.9e-13
[Sat Sep 24 15:01:49 2011] Reading fit data from xmm0110930501/analysis//spectral/fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2_pl.csv
[Sat Sep 24 15:01:49 2011] Spectral fit parameter nH value = 3.67261e+20
[Sat Sep 24 15:01:49 2011] Spectral fit parameter PhoIndex value = 2.1611
[Sat Sep 24 15:01:49 2011] Failed to get F(0.3-8.0) from xmm0110930501/analysis//spectral/fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 15:01:49 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 15:01:49 2011] Using Nh = 3.7e+20, photon index=2.16, rate=0.0428, arf fullrun_mos1_xmm0110930501_pi300-10000_pass1_cl_src2.arf
[Sat Sep 24 15:01:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 15:01:49 2011] Updating source flux to 4.3e-13