[Fri Sep 30 10:23:42 2011] Detection parameters:
  Position = (191.1, 298.1) = 14 36 21.22 48 46 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.3 +/- 8.0
  Background counts = 6.0
  Rate = 0.005 +/- 0.001

[Fri Sep 30 10:23:42 2011] Off-axis axis estimate = 7.78'
[Fri Sep 30 10:47:57 2011] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:47:57 2011] Initial guess for spatial extent in simple fitting = 10.32"
[Fri Sep 30 10:47:57 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.091
[Fri Sep 30 10:47:57 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.32"
[Fri Sep 30 10:59:04 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src6.ximg exists
[Fri Sep 30 10:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src6.csv
[Fri Sep 30 10:59:04 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Sep 30 10:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src6.csv
[Fri Sep 30 10:59:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:59:04 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Sep 30 10:59:04 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Sep 30 10:59:04 2011] Fit fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Sep 30 10:59:09 2011] Spatial fit model total counts = 83.999000, observed total counts = 84.000000
[Fri Sep 30 10:59:09 2011] Offset between fit and detection position for source 4 = 0.330071 pixels
[Fri Sep 30 10:59:09 2011] 82.547300 total counts/ 50.514900 bgd. counts: snr = 4.506919
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.330071 pixels
  Position = (190.8, 298.2) = 14 36 21.35 48 46 5.6
  Extent = 7.8 (5.7-12.6)", rotation angle = 0
  Source counts = 32.0 +/- 9.1
  Background counts = 50.5
  Rate = 0.003 +/- 0.0009
[Fri Sep 30 10:59:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:59:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:59:09 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 10:59:09 2011] Source does appear to be extended
[Fri Sep 30 10:59:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 11:35:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 11:35:23 2011] Initial guess for spatial extent in simple fitting = 7.81"
[Fri Sep 30 11:35:23 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.186
[Fri Sep 30 11:35:23 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.81"
[Fri Sep 30 11:44:14 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src6.ximg exists
[Fri Sep 30 11:44:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src6.csv
[Fri Sep 30 11:44:14 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Sep 30 11:44:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src6.csv
[Fri Sep 30 11:44:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 11:44:14 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Sep 30 11:44:14 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Sep 30 11:44:14 2011] Fit fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Sep 30 11:44:19 2011] Warning, spatial fit 6 centroid is now closest to src. 8
[Fri Sep 30 11:44:19 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 11:44:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 11:44:19 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 11:44:19 2011] Source does appear to be extended
[Fri Sep 30 11:44:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 11:56:27 2011] XMMSAS src. selection expression = ellipse(16549.106380, 25897.965600, 468.741613, 468.741613, 0.000000, X, Y)
[Fri Sep 30 11:56:27 2011] Writing source region out to fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src4_src.reg
[Fri Sep 30 11:56:27 2011] Extracting stamp from image fullrun_mos2_xmm0110930401_pi300-10000_cl_sm2.00.img.gz, (164, 271) - (218, 325)
[Fri Sep 30 11:56:27 2011] XMMSAS bgd. selection expression = annulus(16549.106380, 25897.965600, 781.236022, 1562.472045, X, Y)
[Fri Sep 30 11:56:27 2011] Writing fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src4.gif
[Fri Sep 30 11:58:46 2011] Mean detx,y = (-4016.69, -9246.45) 
[Fri Sep 30 11:58:47 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 11:58:54 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 11:58:54 2011] Setting source spectrum file to fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Sep 30 11:58:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Sep 30 12:03:55 2011] Not generating rmf since there are only 32 counts
[Fri Sep 30 12:03:55 2011] rmf not generated due to insufficient counts
[Fri Sep 30 12:04:11 2011] Updating aperture counts using extracted products
[Fri Sep 30 12:04:12 2011] Error reading totcts from fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Sep 30 12:04:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 12:04:12 2011] Using photon index=1.80, rate=0.00303, arf fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src4.arf
[Fri Sep 30 12:04:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 12:04:12 2011] Updating source flux to 5.1e-14
[Fri Sep 30 12:04:32 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting