[Fri Sep 30 10:23:42 2011] Detection parameters:
  Position = (219.3, 370.0) = 14 36 8.88 48 51 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.7 +/- 10.5
  Background counts = 5.5
  Rate = 0.01 +/- 0.002

[Fri Sep 30 10:23:42 2011] Off-axis axis estimate = 7.74'
[Fri Sep 30 10:47:57 2011] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:47:57 2011] Initial guess for spatial extent in simple fitting = 10.30"
[Fri Sep 30 10:47:57 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Fri Sep 30 10:47:57 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.30"
[Fri Sep 30 10:59:04 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src2.ximg exists
[Fri Sep 30 10:59:04 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src2.csv
[Fri Sep 30 10:59:04 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Sep 30 10:59:04 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src2.csv
[Fri Sep 30 10:59:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:59:04 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 30 10:59:04 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 30 10:59:04 2011] Fit fullrun_mos2_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 30 10:59:09 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.947266 pixels away
[Fri Sep 30 10:59:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:59:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:59:09 2011] Assessing source extent using major
[Fri Sep 30 10:59:09 2011] Source does appear to be extended
[Fri Sep 30 10:59:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 11:35:23 2011] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 11:35:23 2011] Initial guess for spatial extent in simple fitting = 10.30"
[Fri Sep 30 11:35:23 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Fri Sep 30 11:35:23 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.30"
[Fri Sep 30 11:44:14 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src2.ximg exists
[Fri Sep 30 11:44:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src2.csv
[Fri Sep 30 11:44:14 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Sep 30 11:44:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src2.csv
[Fri Sep 30 11:44:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 11:44:14 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 30 11:44:14 2011] fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 30 11:44:14 2011] Fit fullrun_mos2_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 30 11:44:19 2011] Spatial fit model total counts = 121.000000, observed total counts = 121.000000
[Fri Sep 30 11:44:19 2011] Offset between fit and detection position for source 2 = 0.159588 pixels
[Fri Sep 30 11:44:19 2011] 119.893500 total counts/ 77.721300 bgd. counts: snr = 4.783615
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.159588 pixels
  Position = (219.1, 370.1) = 14 36 8.94 48 51 18.4
  Extent = 4.8 (3.8-7.5)", rotation angle = 0
  Source counts = 42.2 +/- 10.9
  Background counts = 77.7
  Rate = 0.004 +/- 0.001
[Fri Sep 30 11:44:19 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 11:44:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 11:44:19 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 11:44:19 2011] Source does appear to be extended
[Fri Sep 30 11:44:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 11:56:27 2011] XMMSAS src. selection expression = ellipse(19014.366180, 32148.736800, 285.723608, 285.723608, 0.000000, X, Y)
[Fri Sep 30 11:56:27 2011] Writing source region out to fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src2_src.reg
[Fri Sep 30 11:56:27 2011] Extracting stamp from image fullrun_mos2_xmm0110930401_pi300-10000_cl_sm2.00.img.gz, (203, 354) - (236, 387)
[Fri Sep 30 11:56:27 2011] XMMSAS bgd. selection expression = annulus(19014.366180, 32148.736800, 476.206014, 952.412027, X, Y)
[Fri Sep 30 11:56:27 2011] Writing fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src2.gif
[Fri Sep 30 11:57:50 2011] Mean detx,y = (2541.56, -10699.14) 
[Fri Sep 30 11:57:51 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 11:57:59 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 11:57:59 2011] Setting source spectrum file to fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Sep 30 11:57:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Sep 30 12:03:47 2011] Not generating rmf since there are only 42 counts
[Fri Sep 30 12:03:47 2011] rmf not generated due to insufficient counts
[Fri Sep 30 12:04:11 2011] Updating aperture counts using extracted products
[Fri Sep 30 12:04:11 2011] Error reading totcts from fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Sep 30 12:04:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 12:04:12 2011] Using photon index=1.80, rate=0.00399, arf fullrun_mos2_xmm0110930401_pi300-10000_pass1_cl_src2.arf
[Fri Sep 30 12:04:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 12:04:12 2011] Updating source flux to 9.4e-14
[Fri Sep 30 12:04:32 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting