[Fri Sep 30 10:23:24 2011] Detection parameters:
  Position = (385.1, 203.0) = 14 34 55.94 48 39 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.8 +/- 14.7
  Background counts = 7.2
  Rate = 0.01 +/- 0.003

[Fri Sep 30 10:23:24 2011] Off-axis axis estimate = 9.34'
[Fri Sep 30 10:29:41 2011] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:29:41 2011] Initial guess for spatial extent in simple fitting = 11.10"
[Fri Sep 30 10:29:41 2011] source mask rpix=2.6, npix_max = 37, mask sum = 34, frac = 0.913
[Fri Sep 30 10:29:41 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.10"
[Fri Sep 30 10:47:57 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src2.ximg exists
[Fri Sep 30 10:47:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src2.csv
[Fri Sep 30 10:47:57 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Sep 30 10:47:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src2.csv
[Fri Sep 30 10:47:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:47:57 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 30 10:47:57 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 30 10:47:57 2011] Fit fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 30 10:59:07 2011] Warning, spatial fit 2 centroid is now closest to src. 1
[Fri Sep 30 10:59:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:59:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:59:07 2011] Assessing source extent using major
[Fri Sep 30 10:59:07 2011] Source does appear to be extended
[Fri Sep 30 10:59:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 11:05:40 2011] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 11:05:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 11:05:40 2011] Initial guess for spatial extent in simple fitting = 11.10"
[Fri Sep 30 11:05:40 2011] source mask rpix=2.6, npix_max = 37, mask sum = 34, frac = 0.913
[Fri Sep 30 11:05:40 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.10"
[Fri Sep 30 11:35:23 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src2.ximg exists
[Fri Sep 30 11:35:23 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Sep 30 11:35:23 2011] Fit fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Sep 30 11:35:23 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 30 11:35:23 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 30 11:35:23 2011] Fit fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 30 11:44:17 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.184036 pixels away
[Fri Sep 30 11:44:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 11:44:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 11:44:17 2011] Assessing source extent using major
[Fri Sep 30 11:44:17 2011] Source does appear to be extended
[Fri Sep 30 11:44:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 11:49:31 2011] XMMSAS src. selection expression = ellipse(33453.177399, 17616.345810, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 30 11:49:31 2011] Writing source region out to fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src8_src.reg
[Fri Sep 30 11:49:31 2011] Extracting stamp from image fullrun_mos1_xmm0110930401_pi300-10000_cl_sm2.00.img.gz, (348, 166) - (423, 241)
[Fri Sep 30 11:49:31 2011] XMMSAS bgd. selection expression = annulus(33453.177399, 17616.345810, 1087.500000, 2175.000000, X, Y) && !ellipse(34136.993000, 18198.640200, 576.143217, 576.143217, 0.000000, X, Y)
[Fri Sep 30 11:49:31 2011] Writing fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src8.gif
[Fri Sep 30 11:50:48 2011] Mean detx,y = (9718.22, 946.04) 
[Fri Sep 30 11:50:50 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 11:50:59 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 11:50:59 2011] Setting source spectrum file to fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Sep 30 11:50:59 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Sep 30 11:56:15 2011] Not generating rmf since there are only 52 counts
[Fri Sep 30 11:56:15 2011] rmf not generated due to insufficient counts
[Fri Sep 30 12:04:10 2011] Updating aperture counts using extracted products
[Fri Sep 30 12:04:10 2011] Error reading totcts from fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Sep 30 12:04:11 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 12:04:11 2011] Using photon index=1.80, rate=0.00964, arf fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src8.arf
[Fri Sep 30 12:04:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 12:04:11 2011] Updating source flux to 1.5e-13
[Fri Sep 30 12:04:13 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting