[Fri Sep 30 10:23:24 2011] Detection parameters:
  Position = (393.0, 209.9) = 14 34 52.45 48 39 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7703.0 +/- 105.5
  Background counts = 7.9
  Rate = 1 +/- 0.02

[Fri Sep 30 10:23:24 2011] Off-axis axis estimate = 9.39'
[Fri Sep 30 10:29:41 2011] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:29:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 10:29:41 2011] Initial guess for spatial extent in simple fitting = 11.13"
[Fri Sep 30 10:29:41 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Fri Sep 30 10:29:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.13"
[Fri Sep 30 10:47:57 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 30 10:47:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 10:47:57 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 30 10:47:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 10:47:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:47:57 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 10:47:57 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 10:47:57 2011] Fit fullrun_mos1_xmm0110930401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 10:59:07 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.547818 pixels away
[Fri Sep 30 10:59:07 2011] Spatial fit model total counts = 2579.670000, observed total counts = 2578.000000
[Fri Sep 30 10:59:07 2011] Offset between fit and detection position for source 1 = 0.963574 pixels
[Fri Sep 30 10:59:07 2011] Warning, changing simple spatial fit ID from 1 to 2
[Fri Sep 30 10:59:07 2011] 2605.033000 total counts/ 499.193000 bgd. counts: snr = 94.252120
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.963574 pixels
  Position = (393.9, 209.4) = 14 34 52.08 48 39 39.4
  Extent = 9.2 (9.0-9.4)", rotation angle = 0
  Source counts = 2105.8 +/- 51.0
  Background counts = 499.2
  Rate = 0.2 +/- 0.005
[Fri Sep 30 10:59:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:59:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:59:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 10:59:07 2011] Source does appear to be extended
[Fri Sep 30 10:59:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 11:05:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 11:05:40 2011] Initial guess for spatial extent in simple fitting = 9.21"
[Fri Sep 30 11:05:40 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Fri Sep 30 11:05:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.21"
[Fri Sep 30 11:35:23 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 30 11:35:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 11:35:23 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 30 11:35:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 11:35:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 11:35:23 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 11:35:23 2011] fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 11:35:23 2011] Fit fullrun_mos1_xmm0110930401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 11:44:17 2011] Spatial fit model total counts = 7492.170000, observed total counts = 7488.000000
[Fri Sep 30 11:44:17 2011] Offset between fit and detection position for source 1 = 0.982758 pixels
[Fri Sep 30 11:44:17 2011] 7499.350000 total counts/ 1210.330000 bgd. counts: snr = 180.771964
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.982758 pixels
  Position = (392.9, 209.7) = 14 34 52.49 48 39 40.8
  Extent = 7.2 (7.1-7.4)", rotation angle = 0
  Source counts = 6289.0 +/- 86.6
  Background counts = 1210.3
  Rate = 0.6 +/- 0.008
[Fri Sep 30 11:44:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 11:44:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 11:44:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 11:44:17 2011] Source does appear to be extended
[Fri Sep 30 11:44:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 11:49:31 2011] Counts = 6289.020000, rescaling region sizes by 2.000000
[Fri Sep 30 11:49:31 2011] XMMSAS src. selection expression = ellipse(34136.993000, 18198.640200, 864.214825, 864.214825, 0.000000, X, Y)
[Fri Sep 30 11:49:31 2011] Writing source region out to fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 11:49:31 2011] Extracting stamp from image fullrun_mos1_xmm0110930401_pi300-10000_cl_sm2.00.img.gz, (343, 160) - (443, 259)
[Fri Sep 30 11:49:31 2011] XMMSAS bgd. selection expression = annulus(34136.993000, 18198.640200, 2880.716083, 5761.432166, X, Y) && !ellipse(33453.177399, 17616.345810, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 11:49:31 2011] Writing fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 11:49:33 2011] Mean detx,y = (9822.15, 402.22) 
[Fri Sep 30 11:49:34 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 11:50:46 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 11:50:46 2011] Setting source spectrum file to fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 11:50:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 12:04:10 2011] Updating aperture counts using extracted products
[Fri Sep 30 12:04:10 2011] Error reading totcts from fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 12:04:11 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 12:04:11 2011] Using photon index=1.80, rate=0.595, arf fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 12:04:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 12:04:11 2011] Updating source flux to 9.1e-12
[Fri Sep 30 12:04:32 2011] Reading fit data from xmm0110930401/analysis//spectral/fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 30 12:04:32 2011] Spectral fit parameter nH value = 6.00709e+12
[Fri Sep 30 12:04:32 2011] Spectral fit parameter PhoIndex value = 1.83751
[Fri Sep 30 12:04:32 2011] Failed to get F(0.3-8.0) from xmm0110930401/analysis//spectral/fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 12:04:32 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 12:04:32 2011] Using Nh = 6e+12, photon index=1.84, rate=0.595, arf fullrun_mos1_xmm0110930401_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 12:04:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 12:04:32 2011] Updating source flux to 8.9e-12