[Wed Oct  5 10:26:36 2011] Detection parameters:
  Position = (303.2, 285.0) = 12 18 55.68 47 18 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 524.3 +/- 30.2
  Background counts = 12.6
  Rate = 0.03 +/- 0.002

[Wed Oct  5 10:26:38 2011] Off-axis axis estimate = 1.03'
[Wed Oct  5 14:46:06 2011] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 14:46:06 2011] Initial guess for spatial extent in simple fitting = 6.95"
[Wed Oct  5 14:46:06 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.910
[Wed Oct  5 14:46:06 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 6.95"
[Wed Oct  5 16:35:08 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Oct  5 16:35:08 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Oct  5 16:35:08 2011] Fit fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Oct  5 16:35:09 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 16:35:09 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 16:35:09 2011] Fit fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 16:35:38 2011] Warning, spatial fit 3 centroid is now closest to src. 6
[Wed Oct  5 16:35:38 2011] Spatial fit model total counts = 1072.390000, observed total counts = 1073.000000
[Wed Oct  5 16:35:38 2011] Offset between fit and detection position for source 5 = 8.221339 pixels
[Wed Oct  5 16:35:38 2011] Warning, changing simple spatial fit ID from 3 to 13
[Wed Oct  5 16:35:38 2011] 1020.079000 total counts/ 585.970000 bgd. counts: snr = 17.933337
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 8.221339 pixels
  Position = (309.1, 290.7) = 12 18 53.15 47 19 21.0
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 434.1 +/- 31.9
  Background counts = 586.0
  Rate = 0.02 +/- 0.002
[Wed Oct  5 16:35:38 2011] Source 5 is offset by 2.115540 and -3.345195 pixels which is larger than
2 X fitted extent = 3.230956 x 3.230956, not incorporating fit results
[Wed Oct  5 16:35:38 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:35:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:35:38 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 16:35:38 2011] Source does appear to be extended
[Wed Oct  5 16:35:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 16:35:38 2011] Source is confused with source 6
[Wed Oct  5 16:35:38 2011] Source is confused with source 8
[Wed Oct  5 19:49:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:49:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 19:49:03 2011] Initial guess for spatial extent in simple fitting = 13.92"
[Wed Oct  5 19:49:03 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.023
[Wed Oct  5 19:49:03 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 13.92"
[Wed Oct  5 21:56:26 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Oct  5 21:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 21:56:26 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Oct  5 21:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 21:56:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:56:27 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 21:56:27 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 21:56:27 2011] Fit fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 21:56:51 2011] Warning, spatial fit 3 centroid is now closest to src. 8
[Wed Oct  5 21:56:51 2011] Spatial fit model total counts = 1358.510000, observed total counts = 1357.000000
[Wed Oct  5 21:56:51 2011] Offset between fit and detection position for source 5 = 0.936311 pixels
[Wed Oct  5 21:56:51 2011] Warning, changing simple spatial fit ID from 3 to 13
[Wed Oct  5 21:56:51 2011] 1293.583000 total counts/ 561.384000 bgd. counts: snr = 30.902891
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.936311 pixels
  Position = (309.4, 289.8) = 12 18 53.02 47 19 17.1
  Extent = 19.5 (16.5-22.9)", rotation angle = 0
  Source counts = 732.2 +/- 36.0
  Background counts = 561.4
  Rate = 0.04 +/- 0.002
[Wed Oct  5 21:56:51 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:56:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:56:51 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:56:51 2011] Source does appear to be extended
[Wed Oct  5 21:56:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 05:46:38 2011] XMMSAS src. selection expression = ellipse(26870.217200, 25162.400000, 1170.066034, 1170.066034, 0.000000, X, Y)
[Thu Oct  6 05:46:38 2011] Writing source region out to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src5_src.reg
[Thu Oct  6 05:46:38 2011] Extracting stamp from image fullrun_mos2_xmm0110920101_pi300-10000_cl_sm2.00.img.gz, (242, 223) - (377, 357)
[Thu Oct  6 05:46:38 2011] XMMSAS bgd. selection expression = annulus(26870.217200, 25162.400000, 1950.110056, 3900.220112, X, Y) && !ellipse(25872.543440, 23904.293600, 436.526413, 436.526413, 0.000000, X, Y) && !ellipse(24946.405200, 22802.374400, 1241.672036, 1241.672036, 0.000000, X, Y) && !ellipse(26755.516000, 25223.652000, 1111.336032, 1111.336032, 0.000000, X, Y) && !ellipse(25800.329240, 21363.935000, 394.468011, 394.468011, 0.000000, X, Y) && !ellipse(24951.040000, 23721.790000, 574.080817, 574.080817, 0.000000, X, Y) && !ellipse(28641.874020, 23061.548000, 285.420008, 285.420008, 0.000000, X, Y) && !ellipse(26479.109180, 22231.991400, 387.666411, 387.666411, 0.000000, X, Y) && !ellipse(27359.970000, 25750.720000, 1449.872042, 1449.872042, 0.000000, X, Y) && !ellipse(24654.638000, 22671.726800, 1281.176037, 1281.176037, 0.000000, X, Y) && !ellipse(24416.275421, 24220.703308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.084000, 24316.062000, 1186.768034, 1186.768034, 0.000000, X, Y) && !ellipse(26095.176000, 27748.837400, 434.298412, 434.298412, 0.000000, X, Y) && !ellipse(24007.191162, 23166.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.534607, 24651.022491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26223.864452, 26512.524400, 371.340011, 371.340011, 0.000000, X, Y) && !ellipse(27934.369200, 26471.514680, 243.497607, 243.497607, 0.000000, X, Y) && !ellipse(27501.889600, 22161.208800, 278.817608, 278.817608, 0.000000, X, Y) && !ellipse(28125.084600, 25919.624000, 1173.416034, 1173.416034, 0.000000, X, Y) && !ellipse(24403.832140, 21298.299400, 299.359209, 299.359209, 0.000000, X, Y) && !ellipse(28285.823975, 23730.956604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27679.537000, 28927.967800, 500.001614, 500.001614, 0.000000, X, Y) && !ellipse(23368.574310, 23183.826752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27874.113892, 23676.589569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.950836, 25951.086792, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Oct  6 05:46:38 2011] Writing fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src5.gif
[Thu Oct  6 05:47:33 2011] Mean detx,y = (1353.49, -399.30) 
[Thu Oct  6 05:47:35 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 05:48:00 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 05:48:00 2011] Setting source spectrum file to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Oct  6 05:48:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Oct  6 07:27:29 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:27:29 2011] Error reading totcts from fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Oct  6 07:27:29 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:27:29 2011] Using photon index=1.80, rate=0.0358, arf fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src5.arf
[Thu Oct  6 07:27:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:27:29 2011] Updating source flux to 3.6e-13
[Thu Oct  6 07:31:28 2011] Flag b found in src. 5 procflags, skipping spectral fitting
[Thu Oct  6 07:31:28 2011] Flag c found in src. 5 procflags, skipping spectral fitting