[Wed Oct  5 10:26:36 2011] Detection parameters:
  Position = (237.3, 157.2) = 12 19 23.76 47 9 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 446.8 +/- 25.5
  Background counts = 5.4
  Rate = 0.04 +/- 0.002

[Wed Oct  5 10:26:38 2011] Off-axis axis estimate = 11.16'
[Wed Oct  5 14:46:06 2011] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 14:46:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 14:46:06 2011] Initial guess for spatial extent in simple fitting = 12.01"
[Wed Oct  5 14:46:06 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.988
[Wed Oct  5 14:46:06 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.01"
[Wed Oct  5 16:35:08 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Oct  5 16:35:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src2.csv
[Wed Oct  5 16:35:08 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Oct  5 16:35:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src2.csv
[Wed Oct  5 16:35:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 16:35:09 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 16:35:09 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 16:35:09 2011] Fit fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 16:35:38 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.486549 pixels away
[Wed Oct  5 16:35:38 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:35:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:35:38 2011] Assessing source extent using major
[Wed Oct  5 16:35:38 2011] Source does appear to be extended
[Wed Oct  5 16:35:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:49:03 2011] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:49:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 19:49:03 2011] Initial guess for spatial extent in simple fitting = 12.01"
[Wed Oct  5 19:49:03 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.988
[Wed Oct  5 19:49:03 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 12.01"
[Wed Oct  5 21:56:26 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Oct  5 21:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src2.csv
[Wed Oct  5 21:56:26 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Oct  5 21:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src2.csv
[Wed Oct  5 21:56:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:56:27 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 21:56:27 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 21:56:27 2011] Fit fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 21:56:51 2011] Spatial fit model total counts = 438.998000, observed total counts = 439.000000
[Wed Oct  5 21:56:51 2011] Offset between fit and detection position for source 2 = 0.214378 pixels
[Wed Oct  5 21:56:51 2011] 442.876000 total counts/ 114.881000 bgd. counts: snr = 30.601529
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.214378 pixels
  Position = (237.5, 157.3) = 12 19 23.70 47 9 40.8
  Extent = 6.0 (5.4-6.5)", rotation angle = 0
  Source counts = 328.0 +/- 21.0
  Background counts = 114.9
  Rate = 0.02 +/- 0.001
[Wed Oct  5 21:56:51 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:56:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:56:51 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:56:51 2011] Source does appear to be extended
[Wed Oct  5 21:56:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 05:46:38 2011] XMMSAS src. selection expression = ellipse(20613.323182, 13638.523320, 358.530610, 358.530610, 0.000000, X, Y)
[Thu Oct  6 05:46:38 2011] Writing source region out to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src2_src.reg
[Thu Oct  6 05:46:38 2011] Extracting stamp from image fullrun_mos2_xmm0110920101_pi300-10000_cl_sm2.00.img.gz, (217, 137) - (258, 178)
[Thu Oct  6 05:46:38 2011] XMMSAS bgd. selection expression = annulus(20613.323182, 13638.523320, 597.551017, 1195.102034, X, Y)
[Thu Oct  6 05:46:38 2011] Writing fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src2.gif
[Thu Oct  6 05:47:09 2011] Mean detx,y = (-9816.66, 5964.23) 
[Thu Oct  6 05:47:11 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 05:47:27 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 05:47:28 2011] Setting source spectrum file to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Oct  6 05:47:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Oct  6 07:27:29 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:27:29 2011] Error reading totcts from fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Oct  6 07:27:29 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:27:29 2011] Using photon index=1.80, rate=0.0161, arf fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src2.arf
[Thu Oct  6 07:27:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:27:29 2011] Updating source flux to 4.2e-13