[Wed Oct  5 10:26:37 2011] Detection parameters:
  Position = (164.0, 374.0) = 12 19 55.35 47 25 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.7 +/- 9.3
  Background counts = 5.3
  Rate = 0.003 +/- 0.0005

[Wed Oct  5 10:26:38 2011] Off-axis axis estimate = 11.18'
[Wed Oct  5 14:46:06 2011] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 14:46:06 2011] Initial guess for spatial extent in simple fitting = 12.02"
[Wed Oct  5 14:46:06 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Wed Oct  5 14:46:06 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 12.02"
[Wed Oct  5 16:35:09 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src35.ximg exists
[Wed Oct  5 16:35:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src35.csv
[Wed Oct  5 16:35:09 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Oct  5 16:35:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src35.csv
[Wed Oct  5 16:35:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 16:35:10 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Oct  5 16:35:10 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Oct  5 16:35:10 2011] Fit fullrun_mos2_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Oct  5 16:35:38 2011] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.599760 pixels away
[Wed Oct  5 16:35:38 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:35:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:35:38 2011] Assessing source extent using major
[Wed Oct  5 16:35:38 2011] Source does appear to be extended
[Wed Oct  5 16:35:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:49:03 2011] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:49:03 2011] Initial guess for spatial extent in simple fitting = 12.02"
[Wed Oct  5 19:49:03 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Wed Oct  5 19:49:03 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 12.02"
[Wed Oct  5 21:56:27 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src33.ximg exists
[Wed Oct  5 21:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src33.csv
[Wed Oct  5 21:56:27 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Oct  5 21:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src33.csv
[Wed Oct  5 21:56:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:56:28 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Oct  5 21:56:28 2011] fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Oct  5 21:56:28 2011] Fit fullrun_mos2_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Oct  5 21:56:51 2011] Spatial fit model total counts = 104.820000, observed total counts = 105.000000
[Wed Oct  5 21:56:51 2011] Offset between fit and detection position for source 18 = 0.245278 pixels
[Wed Oct  5 21:56:51 2011] 103.973300 total counts/ 68.910800 bgd. counts: snr = 4.223760
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.245278 pixels
  Position = (164.2, 374.1) = 12 19 55.25 47 25 22.9
  Extent = 5.7 (3.8-8.3)", rotation angle = 0
  Source counts = 35.1 +/- 10.2
  Background counts = 68.9
  Rate = 0.002 +/- 0.0005
[Wed Oct  5 21:56:51 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:56:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:56:51 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:56:51 2011] Source does appear to be extended
[Wed Oct  5 21:56:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 05:46:39 2011] XMMSAS src. selection expression = ellipse(14235.707600, 32495.793800, 343.264210, 343.264210, 0.000000, X, Y)
[Thu Oct  6 05:46:39 2011] Writing source region out to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src18_src.reg
[Thu Oct  6 05:46:39 2011] Extracting stamp from image fullrun_mos2_xmm0110920101_pi300-10000_cl_sm2.00.img.gz, (144, 354) - (184, 394)
[Thu Oct  6 05:46:39 2011] XMMSAS bgd. selection expression = annulus(14235.707600, 32495.793800, 572.107016, 1144.214033, X, Y)
[Thu Oct  6 05:46:39 2011] Writing fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src18.gif
[Thu Oct  6 05:56:54 2011] Mean detx,y = (-5206.28, -13412.20) 
[Thu Oct  6 05:56:55 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 05:57:02 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 05:57:02 2011] Setting source spectrum file to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Oct  6 05:57:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Oct  6 07:26:55 2011] Not generating rmf since there are only 35 counts
[Thu Oct  6 07:26:55 2011] rmf not generated due to insufficient counts
[Thu Oct  6 07:27:29 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:27:29 2011] Error reading totcts from fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Oct  6 07:27:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:27:30 2011] Using photon index=1.80, rate=0.00172, arf fullrun_mos2_xmm0110920101_pi300-10000_pass1_cl_src18.arf
[Thu Oct  6 07:27:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:27:30 2011] Updating source flux to 5.2e-14
[Thu Oct  6 07:31:28 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting