[Wed Oct  5 10:25:54 2011] Detection parameters:
  Position = (217.4, 271.7) = 12 19 32.34 47 17 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.4 +/- 14.0
  Background counts = 6.6
  Rate = 0.008 +/- 0.0009

[Wed Oct  5 10:25:55 2011] Off-axis axis estimate = 6.18'
[Wed Oct  5 12:52:23 2011] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 12:52:23 2011] Initial guess for spatial extent in simple fitting = 9.52"
[Wed Oct  5 12:52:23 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.865
[Wed Oct  5 12:52:23 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 9.52"
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src18.ximg exists
[Wed Oct  5 14:46:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src18.csv
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Oct  5 14:46:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src18.csv
[Wed Oct  5 14:46:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Oct  5 14:46:05 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Oct  5 16:35:29 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 13.068428 pixels away
[Wed Oct  5 16:35:29 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:35:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:35:29 2011] Assessing source extent using major
[Wed Oct  5 16:35:29 2011] Source does appear to be extended
[Wed Oct  5 16:35:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 18:17:25 2011] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:17:25 2011] Initial guess for spatial extent in simple fitting = 9.52"
[Wed Oct  5 18:17:25 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.865
[Wed Oct  5 18:17:25 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 9.52"
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src17.ximg exists
[Wed Oct  5 19:49:02 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src17.csv
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Oct  5 19:49:02 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src17.csv
[Wed Oct  5 19:49:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Oct  5 19:49:02 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Oct  5 21:56:44 2011] Spatial fit model total counts = 176.000000, observed total counts = 176.000000
[Wed Oct  5 21:56:44 2011] Offset between fit and detection position for source 39 = 0.197496 pixels
[Wed Oct  5 21:56:44 2011] 178.982800 total counts/ 87.095000 bgd. counts: snr = 9.846032
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.197496 pixels
  Position = (217.4, 271.5) = 12 19 32.37 47 17 57.2
  Extent = 5.5 (4.2-6.6)", rotation angle = 0
  Source counts = 91.9 +/- 13.4
  Background counts = 87.1
  Rate = 0.004 +/- 0.0007
[Wed Oct  5 21:56:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:56:44 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:56:44 2011] Source does appear to be extended
[Wed Oct  5 21:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 03:46:57 2011] XMMSAS src. selection expression = ellipse(18863.762000, 23570.535600, 330.127209, 330.127209, 0.000000, X, Y)
[Thu Oct  6 03:46:57 2011] Writing source region out to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src39_src.reg
[Thu Oct  6 03:46:57 2011] Extracting stamp from image fullrun_mos1_xmm0110920101_pi300-10000_cl_sm2.00.img.gz, (198, 253) - (236, 290)
[Thu Oct  6 03:46:57 2011] XMMSAS bgd. selection expression = annulus(18863.762000, 23570.535600, 550.212016, 1100.424032, X, Y)
[Thu Oct  6 03:46:57 2011] Writing fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src39.gif
[Thu Oct  6 03:52:04 2011] Mean detx,y = (-3189.66, 5844.45) 
[Thu Oct  6 03:52:05 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 03:52:22 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 03:52:22 2011] Setting source spectrum file to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Oct  6 03:52:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Oct  6 05:09:34 2011] Not generating rmf since there are only 91 counts
[Thu Oct  6 05:09:34 2011] rmf not generated due to insufficient counts
[Thu Oct  6 07:27:27 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:27:27 2011] Error reading totcts from fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Oct  6 07:27:28 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:27:28 2011] Using photon index=1.80, rate=0.0045, arf fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src39.arf
[Thu Oct  6 07:27:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:27:28 2011] Updating source flux to 6.9e-14
[Thu Oct  6 07:27:32 2011] Source 39 has fewer than 100.000000 counts, skipping spectral fitting