[Wed Oct  5 10:25:54 2011] Detection parameters:
  Position = (324.8, 274.4) = 12 18 46.42 47 18 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.2 +/- 12.5
  Background counts = 10.3
  Rate = 0.004 +/- 0.0007

[Wed Oct  5 10:25:55 2011] Off-axis axis estimate = 2.59'
[Wed Oct  5 12:52:23 2011] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 12:52:23 2011] Initial guess for spatial extent in simple fitting = 7.72"
[Wed Oct  5 12:52:23 2011] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.869
[Wed Oct  5 12:52:23 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 7.72"
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src24.ximg exists
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed Oct  5 14:46:05 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src24 appears to have run properly
[Wed Oct  5 14:46:06 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed Oct  5 14:46:06 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Oct  5 14:46:06 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Wed Oct  5 16:35:29 2011] Spatial fit model total counts = 991.274000, observed total counts = 991.000000
[Wed Oct  5 16:35:29 2011] Offset between fit and detection position for source 38 = 5.283347 pixels
[Wed Oct  5 16:35:29 2011] Warning, changing simple spatial fit ID from 24 to 19
[Wed Oct  5 16:35:29 2011] 891.042000 total counts/ 751.865000 bgd. counts: snr = 5.075719
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 5.283347 pixels
  Position = (321.3, 278.4) = 12 18 47.93 47 18 27.4
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 139.2 +/- 29.9
  Background counts = 751.9
  Rate = 0.007 +/- 0.001
[Wed Oct  5 16:35:29 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:35:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:35:29 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 16:35:29 2011] Source does appear to be extended
[Wed Oct  5 16:35:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 16:35:29 2011] Source is confused with source 36
[Wed Oct  5 18:17:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:17:25 2011] Initial guess for spatial extent in simple fitting = 14.46"
[Wed Oct  5 18:17:25 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.957
[Wed Oct  5 18:17:25 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 14.46"
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src23.ximg exists
[Wed Oct  5 19:49:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src23.csv
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Oct  5 19:49:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src23.csv
[Wed Oct  5 19:49:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Oct  5 19:49:02 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Wed Oct  5 21:56:44 2011] Spatial fit model total counts = 594.846000, observed total counts = 597.000000
[Wed Oct  5 21:56:44 2011] Offset between fit and detection position for source 38 = 7.464563 pixels
[Wed Oct  5 21:56:44 2011] Warning, changing simple spatial fit ID from 23 to 16
[Wed Oct  5 21:56:44 2011] 390.353400 total counts/ 350.979000 bgd. counts: snr = 2.101713
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 7.464563 pixels
  Position = (321.1, 285.8) = 12 18 48.03 47 18 59.9
  Extent = 17.3 (17.0-34.7)", rotation angle = 216 (210-224) degrees
  Source counts = 39.4 +/- 19.8
  Background counts = 351.0
  Rate = 0.002 +/- 0.001
[Wed Oct  5 21:56:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:56:44 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:56:44 2011] Source does appear to be extended
[Wed Oct  5 21:56:44 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.02
[Wed Oct  5 21:56:44 2011] Source is asymmetric
[Thu Oct  6 03:46:57 2011] XMMSAS src. selection expression = ellipse(27884.784000, 24817.212000, 1040.574030, 130.071604, 216.380000, X, Y)
[Thu Oct  6 03:46:57 2011] Writing source region out to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src38_src.reg
[Thu Oct  6 03:46:57 2011] Extracting stamp from image fullrun_mos1_xmm0110920101_pi300-10000_cl_sm2.00.img.gz, (261, 226) - (381, 346)
[Thu Oct  6 03:46:57 2011] XMMSAS bgd. selection expression = annulus(27884.784000, 24817.212000, 1734.290050, 3468.580100, X, Y) && !ellipse(25872.890180, 23902.132200, 448.177613, 448.177613, 0.000000, X, Y) && !ellipse(26354.338000, 24833.004000, 1098.536032, 580.708017, 308.331000, X, Y) && !ellipse(24647.038000, 22492.534000, 1248.584036, 1248.584036, 0.000000, X, Y) && !ellipse(26778.110000, 25247.270000, 1156.776033, 1121.352032, 79.574000, X, Y) && !ellipse(24346.295200, 22468.442380, 1288.312037, 717.780821, 349.542000, X, Y) && !ellipse(25792.958000, 21348.142600, 367.696011, 367.696011, 0.000000, X, Y) && !ellipse(24406.000200, 24264.401000, 1176.784034, 796.708823, 36.358600, X, Y) && !ellipse(26466.965060, 22200.200600, 314.256009, 314.256009, 0.000000, X, Y) && !ellipse(26120.548000, 27717.791000, 373.369611, 373.369611, 0.000000, X, Y) && !ellipse(27244.604000, 25651.422000, 1965.920057, 1965.920057, 0.000000, X, Y) && !ellipse(28375.170800, 24309.178000, 693.716020, 693.716020, 0.000000, X, Y) && !ellipse(27046.748000, 25098.104000, 2313.552067, 2313.552067, 0.000000, X, Y) && !ellipse(28381.816000, 24367.582000, 1179.296034, 1179.296034, 0.000000, X, Y) && !ellipse(27489.576200, 22129.711800, 337.684010, 337.684010, 0.000000, X, Y) && !ellipse(26220.852160, 26513.153200, 299.109609, 299.109609, 0.000000, X, Y) && !ellipse(27975.497760, 26469.154900, 464.188813, 464.188813, 0.000000, X, Y) && !ellipse(24057.267670, 23531.540009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28371.716827, 25621.289673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24736.047150, 25072.128723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29032.370422, 25275.397766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26689.025635, 22938.669312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.504000, 25613.845000, 1193.488034, 1193.488034, 0.000000, X, Y)
[Thu Oct  6 03:46:57 2011] Writing fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src38.gif
[Thu Oct  6 03:54:14 2011] Mean detx,y = (578.23, -2319.29) 
[Thu Oct  6 03:54:16 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 03:54:28 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 03:54:28 2011] Setting source spectrum file to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Oct  6 03:54:28 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Oct  6 05:46:13 2011] Not generating rmf since there are only 39 counts
[Thu Oct  6 05:46:13 2011] rmf not generated due to insufficient counts
[Thu Oct  6 07:27:27 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:27:27 2011] Error reading totcts from fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Oct  6 07:27:28 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:27:28 2011] Using photon index=1.80, rate=0.00193, arf fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src38.arf
[Thu Oct  6 07:27:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:27:28 2011] Updating source flux to 2.3e-14
[Thu Oct  6 07:27:32 2011] Flag c found in src. 38 procflags, skipping spectral fitting
[Thu Oct  6 07:27:32 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting