[Wed Oct  5 10:25:53 2011] Detection parameters:
  Position = (300.9, 319.1) = 12 18 56.64 47 21 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.7 +/- 15.7
  Background counts = 8.2
  Rate = 0.009 +/- 0.0009

[Wed Oct  5 10:25:55 2011] Off-axis axis estimate = 1.51'
[Wed Oct  5 12:52:23 2011] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 12:52:23 2011] Initial guess for spatial extent in simple fitting = 7.18"
[Wed Oct  5 12:52:23 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Wed Oct  5 12:52:23 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 7.18"
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src15.ximg exists
[Wed Oct  5 14:46:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src15.csv
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Oct  5 14:46:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src15.csv
[Wed Oct  5 14:46:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Oct  5 14:46:05 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Oct  5 16:35:29 2011] Source 14 is offset by 1.939840 and 5.689368 pixels which is larger than
2 X fitted extent = 0.825577 x 0.825577, not incorporating fit results
[Wed Oct  5 16:35:29 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:35:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:35:29 2011] Assessing source extent using major
[Wed Oct  5 16:35:29 2011] Source does appear to be extended
[Wed Oct  5 16:35:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 18:17:25 2011] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:17:25 2011] Initial guess for spatial extent in simple fitting = 7.18"
[Wed Oct  5 18:17:25 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Wed Oct  5 18:17:25 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 7.18"
[Wed Oct  5 19:49:01 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src14.ximg exists
[Wed Oct  5 19:49:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src14.csv
[Wed Oct  5 19:49:01 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Oct  5 19:49:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src14.csv
[Wed Oct  5 19:49:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Oct  5 19:49:02 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed Oct  5 21:56:44 2011] Spatial fit model total counts = 205.000000, observed total counts = 205.000000
[Wed Oct  5 21:56:44 2011] Offset between fit and detection position for source 14 = 0.158291 pixels
[Wed Oct  5 21:56:44 2011] 201.831000 total counts/ 96.336000 bgd. counts: snr = 10.748245
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.158291 pixels
  Position = (300.8, 319.2) = 12 18 56.70 47 21 24.9
  Extent = 4.7 (3.8-5.5)", rotation angle = 0
  Source counts = 105.5 +/- 14.2
  Background counts = 96.3
  Rate = 0.005 +/- 0.0007
[Wed Oct  5 21:56:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:56:44 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:56:44 2011] Source does appear to be extended
[Wed Oct  5 21:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 03:46:56 2011] XMMSAS src. selection expression = ellipse(26120.548000, 27717.791000, 280.027208, 280.027208, 0.000000, X, Y)
[Thu Oct  6 03:46:56 2011] Writing source region out to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src14_src.reg
[Thu Oct  6 03:46:56 2011] Extracting stamp from image fullrun_mos1_xmm0110920101_pi300-10000_cl_sm2.00.img.gz, (285, 303) - (317, 335)
[Thu Oct  6 03:46:56 2011] XMMSAS bgd. selection expression = annulus(26120.548000, 27717.791000, 466.712013, 933.424027, X, Y) && !ellipse(27244.604000, 25651.422000, 1965.920057, 1965.920057, 0.000000, X, Y) && !ellipse(27046.748000, 25098.104000, 2313.552067, 2313.552067, 0.000000, X, Y) && !ellipse(26220.852160, 26513.153200, 299.109609, 299.109609, 0.000000, X, Y)
[Thu Oct  6 03:46:56 2011] Writing fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src14.gif
[Thu Oct  6 03:50:56 2011] Mean detx,y = (-2818.87, -2508.81) 
[Thu Oct  6 03:50:56 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 03:51:05 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 03:51:05 2011] Setting source spectrum file to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Oct  6 03:51:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Oct  6 07:27:27 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:27:27 2011] Error reading totcts from fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Oct  6 07:27:28 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:27:28 2011] Using photon index=1.80, rate=0.00516, arf fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src14.arf
[Thu Oct  6 07:27:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:27:28 2011] Updating source flux to 7.2e-14
[Thu Oct  6 07:27:32 2011] Flag b found in src. 14 procflags, skipping spectral fitting