[Wed Oct  5 10:25:53 2011] Detection parameters:
  Position = (412.9, 247.8) = 12 18 8.80 47 16 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 397.4 +/- 23.2
  Background counts = 5.5
  Rate = 0.02 +/- 0.001

[Wed Oct  5 10:25:55 2011] Off-axis axis estimate = 9.07'
[Wed Oct  5 12:52:23 2011] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 12:52:23 2011] Initial guess for spatial extent in simple fitting = 10.96"
[Wed Oct  5 12:52:23 2011] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.959
[Wed Oct  5 12:52:23 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.96"
[Wed Oct  5 14:46:04 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Oct  5 14:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src6.csv
[Wed Oct  5 14:46:04 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Oct  5 14:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src6.csv
[Wed Oct  5 14:46:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct  5 14:46:05 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct  5 14:46:05 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Oct  5 16:35:29 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.780313 pixels away
[Wed Oct  5 16:35:29 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:35:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:35:29 2011] Assessing source extent using major
[Wed Oct  5 16:35:29 2011] Source does appear to be extended
[Wed Oct  5 16:35:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 18:17:25 2011] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 18:17:25 2011] Initial guess for spatial extent in simple fitting = 10.96"
[Wed Oct  5 18:17:25 2011] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.959
[Wed Oct  5 18:17:25 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 10.96"
[Wed Oct  5 19:49:01 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Oct  5 19:49:01 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Oct  5 19:49:01 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_src6 appears to have run properly
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct  5 19:49:02 2011] fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct  5 19:49:02 2011] Fit fullrun_mos1_xmm0110920101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Oct  5 21:56:44 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.201640 pixels away
[Wed Oct  5 21:56:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:56:44 2011] Assessing source extent using major
[Wed Oct  5 21:56:44 2011] Source does appear to be extended
[Wed Oct  5 21:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 03:46:56 2011] XMMSAS src. selection expression = ellipse(35871.099304, 21512.063660, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Oct  6 03:46:56 2011] Writing source region out to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src1_src.reg
[Thu Oct  6 03:46:56 2011] Extracting stamp from image fullrun_mos1_xmm0110920101_pi300-10000_cl_sm2.00.img.gz, (375, 210) - (450, 285)
[Thu Oct  6 03:46:56 2011] XMMSAS bgd. selection expression = annulus(35871.099304, 21512.063660, 1087.500000, 2175.000000, X, Y)
[Thu Oct  6 03:46:56 2011] Writing fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src1.gif
[Thu Oct  6 03:48:44 2011] Mean detx,y = (7630.22, -7418.37) 
[Thu Oct  6 03:48:46 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 03:49:07 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 03:49:07 2011] Setting source spectrum file to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 03:49:07 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Oct  6 04:17:16 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Oct  6 04:17:16 2011] rmf not generated due to insufficient counts
[Thu Oct  6 07:27:27 2011] Updating aperture counts using extracted products
[Thu Oct  6 07:27:27 2011] Error reading totcts from fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 07:27:28 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 07:27:28 2011] Using photon index=1.80, rate=0.0194, arf fullrun_mos1_xmm0110920101_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 07:27:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 07:27:28 2011] Updating source flux to 3.9e-13
[Thu Oct  6 07:27:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting