[Thu May 9 01:14:20 2013] Detection parameters: Position = (309.0, 249.9) = 13 36 55.06 -29 53 40.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 139.0 +/- 22.2 Background counts = 125.1 Rate = 0.006 +/- 0.001 [Thu May 9 01:14:21 2013] Off-axis axis estimate = 3.60' [Thu May 9 01:16:38 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting [Thu May 9 01:16:38 2013] Initial guess for spatial extent in simple fitting = 8.23" [Thu May 9 01:16:38 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.699 [Thu May 9 01:16:38 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 8.23" [Thu May 9 04:37:51 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src61.ximg exists [Thu May 9 04:37:51 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src61_1.ximg exists [Thu May 9 04:37:51 2013] Fit fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src61 appears to have run properly [Thu May 9 04:37:53 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists [Thu May 9 04:37:53 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists [Thu May 9 04:37:53 2013] Fit fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly [Thu May 9 08:23:54 2013] Source 62 is offset by 6.722032 and -0.289539 pixels which is larger than 2 X fitted extent = 1.962538 x 2.479301, not incorporating fit results [Thu May 9 08:23:54 2013] Spatial fit model total counts = 2159.050000, observed total counts = 2169.000000 [Thu May 9 08:23:54 2013] Offset between fit and detection position for source 62 = 5.288145 pixels [Thu May 9 08:23:54 2013] 1901.245000 total counts/ 1370.000000 bgd. counts: snr = 14.352732 Spatial fit parameters: Offset between fit and detection position for source 62 = 5.288145 pixels Position = (306.3, 245.4) = 13 36 55.98 -29 53 59.6 Extent = 16.5 (16.4-32.9)", rotation angle = 0 Source counts = 531.2 +/- 43.6 Background counts = 1370.0 Rate = 0.02 +/- 0.002 [Thu May 9 08:23:54 2013] Vigneting correction estimate = 1.000000 [Thu May 9 08:23:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 08:23:54 2013] Assessing source extent using major axis lower bound [Thu May 9 08:23:54 2013] Source does appear to be extended [Thu May 9 08:23:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 08:23:54 2013] Source is confused with source 63 [Thu May 9 08:23:54 2013] Source is confused with source 65 [Thu May 9 08:24:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 9 08:24:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 9 08:24:31 2013] Initial guess for spatial extent in simple fitting = 16.46" [Thu May 9 08:24:31 2013] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.872 [Thu May 9 08:24:31 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 16.46" [Thu May 9 10:35:33 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src53.ximg exists [Thu May 9 10:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src53.csv [Thu May 9 10:35:33 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src53_1.ximg exists [Thu May 9 10:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src53.csv [Thu May 9 10:35:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 10:35:34 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists [Thu May 9 10:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src53.csv [Thu May 9 10:35:34 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists [Thu May 9 10:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src53.csv [Thu May 9 10:35:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 13:15:45 2013] Warning, spatial fit 53 centroid is now closest to src. 63 [Thu May 9 13:15:45 2013] Source 62 is offset by 6.625701 and -4.278552 pixels which is larger than 2 X fitted extent = 0.975030 x 0.975030, not incorporating fit results [Thu May 9 13:15:45 2013] Vigneting correction estimate = 1.000000 [Thu May 9 13:15:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 13:15:45 2013] Assessing source extent using major axis lower bound [Thu May 9 13:15:45 2013] Source does appear to be extended [Thu May 9 13:15:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 13:16:13 2013] XMMSAS src. selection expression = ellipse(26597.726000, 21301.458000, 987.426028, 987.426028, 0.000000, X, Y) [Thu May 9 13:16:13 2013] Writing source region out to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src62_src.reg [Thu May 9 13:16:13 2013] Extracting stamp from image fullrun_pn_xmm0110910201_pi300-10000_cl_sm2.00.img.gz, (250, 189) - (363, 302) [Thu May 9 13:16:13 2013] XMMSAS bgd. selection expression = annulus(26597.726000, 21301.458000, 1645.710047, 3291.420095, X, Y) && !ellipse(25408.795400, 23711.706400, 710.957620, 661.392819, 339.259100, X, Y) && !ellipse(25187.165833, 21982.307846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24409.254840, 24461.148800, 442.438413, 383.348011, 48.057300, X, Y) && !ellipse(23721.242000, 24863.408000, 406.259212, 295.380008, 52.803000, X, Y) && !ellipse(27531.408020, 24191.715698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23639.976715, 24238.077820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24193.436200, 23141.136000, 388.837611, 283.588808, 102.216100, X, Y) && !ellipse(27587.933600, 22764.754700, 1273.000037, 997.352029, 130.613700, X, Y) && !ellipse(26888.030701, 22378.259003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.053700, 22627.010060, 2216.872064, 1295.992037, 322.244200, X, Y) && !ellipse(24446.347400, 21219.174000, 446.795213, 360.750410, 359.649649, X, Y) && !ellipse(25023.978320, 19735.633400, 418.955212, 418.955212, 0.000000, X, Y) && !ellipse(24035.838928, 25418.806519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27806.816864, 25357.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.040000, 25300.540000, 1108.080032, 1108.080032, 0.000000, X, Y) && !ellipse(25440.715820, 25016.787292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27215.857788, 24643.261841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25985.195953, 24724.898682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23056.198000, 23713.328000, 1217.032035, 1217.032035, 0.000000, X, Y) && !ellipse(26589.199188, 23008.637299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23273.815060, 22880.286000, 1290.440037, 482.600014, 91.757150, X, Y) && !ellipse(26139.323059, 22411.056580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27222.479431, 21533.820297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.263977, 21209.377045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25663.470123, 21002.017929, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 9 13:16:13 2013] Writing fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src62.gif [Thu May 9 13:44:41 2013] Mean detx,y = (76.89, -2859.97) [Thu May 9 13:44:43 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 9 13:45:00 2013] Binned source spectrum to 10 counts/bin [Thu May 9 13:45:01 2013] Setting source spectrum file to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Thu May 9 13:45:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src62_bgd.pi.gz [Thu May 9 17:09:46 2013] Updating aperture counts using extracted products [Thu May 9 17:09:46 2013] Total counts from fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 2269.00 [Thu May 9 17:09:46 2013] Total counts from fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src62_bgd.pi.gz = 4560.00 [Thu May 9 17:09:46 2013] Got source and background scale factors 2635712.000000, 11576123.000000 [Thu May 9 17:09:46 2013] User source parameters: Position = (306.3, 245.4) = 13 36 55.98 -29 53 59.6 Extent = 16.5 (16.4-32.9)", rotation angle = 0 Source aperture counts = 1230.8 +/- 48.6 Background aperture counts = 1038.2 Rate = 0.06 +/- 0.002 [Thu May 9 17:09:48 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 9 17:09:48 2013] Using photon index=1.80, rate=0.0243, arf fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src62.arf [Thu May 9 17:09:48 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 9 17:09:48 2013] Updating source flux to 7.6e-14 [Thu May 9 17:10:13 2013] Flag b found in src. 62 procflags, skipping spectral fitting [Thu May 9 17:10:13 2013] Flag c found in src. 62 procflags, skipping spectral fitting [Thu May 9 17:10:20 2013] xmm0110910201/analysis//spectral/fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete