[Thu May  9 01:14:20 2013] Detection parameters:
  Position = (268.3, 264.9) = 13 37 8.69 -29 52 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.5 +/- 22.9
  Background counts = 159.9
  Rate = 0.005 +/- 0.001

[Thu May  9 01:14:21 2013] Off-axis axis estimate = 3.27'
[Thu May  9 01:16:38 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Thu May  9 01:16:38 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Thu May  9 01:16:38 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Thu May  9 01:16:38 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 8.07"
[Thu May  9 04:37:51 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src59.ximg exists
[Thu May  9 04:37:51 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src59_1.ximg exists
[Thu May  9 04:37:51 2013] Fit fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src59 appears to have run properly
[Thu May  9 04:37:53 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Thu May  9 04:37:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Thu May  9 04:37:53 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Thu May  9 04:37:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Thu May  9 04:37:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 08:23:54 2013] Spatial fit model total counts = 1508.890000, observed total counts = 1382.000000
[Thu May  9 08:23:54 2013] Offset between fit and detection position for source 60 = 1.318711 pixels
[Thu May  9 08:23:54 2013] 1522.497000 total counts/ 1400.600000 bgd. counts: snr = 3.257136
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 1.318711 pixels
  Position = (268.1, 263.5) = 13 37 8.76 -29 52 40.6
  Extent = 16.1 (16.1-32.3)" x 6.0 (3.4-9.7)", rotation angle = 92 (69-123) degrees
  Source counts = 121.9 +/- 39.0
  Background counts = 1400.6
  Rate = 0.006 +/- 0.002
[Thu May  9 08:23:54 2013] Vigneting correction estimate = 1.000000
[Thu May  9 08:23:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 08:23:54 2013] Assessing source extent using major axis lower bound
[Thu May  9 08:23:54 2013] Source does appear to be extended
[Thu May  9 08:23:54 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.66
[Thu May  9 08:23:54 2013] Source is asymmetric
[Thu May  9 08:23:54 2013] Source is confused with source 19
[Thu May  9 08:24:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 08:24:31 2013] Initial guess for spatial extent in simple fitting = 11.08"
[Thu May  9 08:24:31 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Thu May  9 08:24:31 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 11.08"
[Thu May  9 10:35:33 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src51.ximg exists
[Thu May  9 10:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src51.csv
[Thu May  9 10:35:33 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu May  9 10:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src51.csv
[Thu May  9 10:35:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 10:35:34 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu May  9 10:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu May  9 10:35:34 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu May  9 10:35:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu May  9 10:35:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:15:45 2013] Spatial fit model total counts = 1465.660000, observed total counts = 1290.000000
[Thu May  9 13:15:45 2013] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 13:15:45 2013] Vigneting correction estimate = 1.000000
[Thu May  9 13:15:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 13:15:45 2013] Assessing source extent using major axis lower bound
[Thu May  9 13:15:45 2013] Source does appear to be extended
[Thu May  9 13:15:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.66
[Thu May  9 13:15:45 2013] Source is asymmetric
[Thu May  9 13:16:13 2013] XMMSAS src. selection expression = ellipse(23273.815060, 22880.286000, 967.830028, 361.950010, 91.757150, X, Y)
[Thu May  9 13:16:13 2013] Writing source region out to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src60_src.reg
[Thu May  9 13:16:13 2013] Extracting stamp from image fullrun_pn_xmm0110910201_pi300-10000_cl_sm2.00.img.gz, (212, 208) - (324, 319)
[Thu May  9 13:16:13 2013] XMMSAS bgd. selection expression = annulus(23273.815060, 22880.286000, 1613.050046, 3226.100093, X, Y) && !ellipse(20407.538284, 21523.725876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.795400, 23711.706400, 710.957620, 661.392819, 339.259100, X, Y) && !ellipse(25187.165833, 21982.307846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24409.254840, 24461.148800, 442.438413, 383.348011, 48.057300, X, Y) && !ellipse(25706.408380, 26117.456200, 404.173612, 404.173612, 0.000000, X, Y) && !ellipse(21281.786331, 26539.669617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23721.242000, 24863.408000, 406.259212, 295.380008, 52.803000, X, Y) && !ellipse(23639.976715, 24238.077820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24193.436200, 23141.136000, 388.837611, 283.588808, 102.216100, X, Y) && !ellipse(27587.933600, 22764.754700, 1273.000037, 997.352029, 130.613700, X, Y) && !ellipse(26888.030701, 22378.259003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.053700, 22627.010060, 2216.872064, 1295.992037, 322.244200, X, Y) && !ellipse(24446.347400, 21219.174000, 446.795213, 360.750410, 359.649649, X, Y) && !ellipse(25023.978320, 19735.633400, 418.955212, 418.955212, 0.000000, X, Y) && !ellipse(23430.140600, 27077.732800, 1209.440035, 1209.440035, 0.000000, X, Y) && !ellipse(26790.997345, 26111.623138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.099762, 25673.811462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.838928, 25418.806519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.040000, 25300.540000, 1108.080032, 1108.080032, 0.000000, X, Y) && !ellipse(25440.715820, 25016.787292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27215.857788, 24643.261841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25985.195953, 24724.898682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23056.198000, 23713.328000, 1217.032035, 1217.032035, 0.000000, X, Y) && !ellipse(21066.496643, 23803.353943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26589.199188, 23008.637299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.323059, 22411.056580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.726000, 21301.458000, 1316.568038, 1316.568038, 0.000000, X, Y) && !ellipse(27222.479431, 21533.820297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25663.470123, 21002.017929, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 13:16:13 2013] Writing fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src60.gif
[Thu May  9 13:43:56 2013] Mean detx,y = (2552.09, -164.30) 
[Thu May  9 13:43:58 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 13:44:17 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 13:44:17 2013] Setting source spectrum file to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Thu May  9 13:44:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Thu May  9 17:09:45 2013] Updating aperture counts using extracted products
[Thu May  9 17:09:45 2013] Total counts from fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 868.00
[Thu May  9 17:09:45 2013] Total counts from fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src60_bgd.pi.gz = 4056.00
[Thu May  9 17:09:45 2013] Got source and background scale factors 1043758.000000, 8686742.000000
[Thu May  9 17:09:45 2013] User source parameters:
  Position = (268.1, 263.5) = 13 37 8.76 -29 52 40.6
  Extent = 16.1 (16.1-32.3)" x 6.0 (3.4-9.7)", rotation angle = 92 (69-123) degrees
  Source aperture counts = 380.7 +/- 30.5
  Background aperture counts = 487.3
  Rate = 0.02 +/- 0.001

[Thu May  9 17:09:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 17:09:48 2013] Using photon index=1.80, rate=0.00558, arf fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src60.arf
[Thu May  9 17:09:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 17:09:48 2013] Updating source flux to 1.8e-14
[Thu May  9 17:10:13 2013] Flag p found in src. 60 procflags, skipping spectral fitting
[Thu May  9 17:10:13 2013] Flag c found in src. 60 procflags, skipping spectral fitting
[Thu May  9 17:10:20 2013] xmm0110910201/analysis//spectral/fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete