[Thu May 9 01:14:15 2013] Detection parameters: Position = (290.1, 253.2) = 13 37 1.40 -29 53 25.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1090.3 +/- 44.0 Background counts = 146.3 Rate = 0.05 +/- 0.002 [Thu May 9 01:14:21 2013] Off-axis axis estimate = 3.33' [Thu May 9 01:16:38 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting [Thu May 9 01:16:38 2013] Initial guess for spatial extent in simple fitting = 8.10" [Thu May 9 01:16:38 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897 [Thu May 9 01:16:38 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.10" [Thu May 9 04:37:50 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src5.ximg exists [Thu May 9 04:37:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src5.csv [Thu May 9 04:37:50 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src5_1.ximg exists [Thu May 9 04:37:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src5.csv [Thu May 9 04:37:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 04:37:52 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Thu May 9 04:37:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src5.csv [Thu May 9 04:37:52 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Thu May 9 04:37:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src5.csv [Thu May 9 04:37:52 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 08:23:54 2013] Spatial fit model total counts = 2321.070000, observed total counts = 2010.000000 [Thu May 9 08:23:54 2013] Poor agreement between spatial fit and data for source 5 It may help to tweak spatial fit manually Not incorporating fit results [Thu May 9 08:23:54 2013] Vigneting correction estimate = 1.000000 [Thu May 9 08:23:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 08:23:54 2013] Assessing source extent using major [Thu May 9 08:23:54 2013] Source does appear to be extended [Thu May 9 08:23:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 08:24:31 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting [Thu May 9 08:24:31 2013] Initial guess for spatial extent in simple fitting = 8.10" [Thu May 9 08:24:31 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897 [Thu May 9 08:24:31 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.10" [Thu May 9 10:35:31 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src5.ximg exists [Thu May 9 10:35:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src5.csv [Thu May 9 10:35:31 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src5_1.ximg exists [Thu May 9 10:35:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src5.csv [Thu May 9 10:35:32 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 10:35:33 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Thu May 9 10:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src5.csv [Thu May 9 10:35:33 2013] fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Thu May 9 10:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src5.csv [Thu May 9 10:35:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 13:15:45 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.041261 pixels away [Thu May 9 13:15:45 2013] Source 5 is offset by 3.424067 and 3.586619 pixels which is larger than 2 X fitted extent = 0.580133 x 0.580133, not incorporating fit results [Thu May 9 13:15:45 2013] Source 5 is offset by -3.678117 and -1.920737 pixels which is larger than 2 X fitted extent = 2.311283 x 2.311283, not incorporating fit results [Thu May 9 13:15:45 2013] Vigneting correction estimate = 1.000000 [Thu May 9 13:15:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 13:15:45 2013] Assessing source extent using major [Thu May 9 13:15:45 2013] Source does appear to be extended [Thu May 9 13:15:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 13:16:11 2013] Counts = 1090.348145, rescaling region sizes by 2.000000 [Thu May 9 13:16:11 2013] XMMSAS src. selection expression = ellipse(25187.165833, 21982.307846, 1305.000000, 1305.000000, 0.000000, X, Y) [Thu May 9 13:16:11 2013] Writing source region out to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src5_src.reg [Thu May 9 13:16:11 2013] Extracting stamp from image fullrun_pn_xmm0110910201_pi300-10000_cl_sm2.00.img.gz, (215, 178) - (365, 328) [Thu May 9 13:16:11 2013] XMMSAS bgd. selection expression = annulus(25187.165833, 21982.307846, 4350.000000, 8700.000000, X, Y) && !ellipse(20407.538284, 21523.725876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.472565, 15038.145096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.795400, 23711.706400, 710.957620, 661.392819, 339.259100, X, Y) && !ellipse(24409.254840, 24461.148800, 442.438413, 383.348011, 48.057300, X, Y) && !ellipse(25706.408380, 26117.456200, 404.173612, 404.173612, 0.000000, X, Y) && !ellipse(31022.062840, 28807.288600, 513.849615, 394.132811, 35.657018, X, Y) && !ellipse(29666.048920, 27639.563293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.901215, 26978.699951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.178600, 26715.431200, 569.248016, 569.248016, 0.000000, X, Y) && !ellipse(21281.786331, 26539.669617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23721.242000, 24863.408000, 406.259212, 295.380008, 52.803000, X, Y) && !ellipse(27531.408020, 24191.715698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23639.976715, 24238.077820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24193.436200, 23141.136000, 388.837611, 283.588808, 102.216100, X, Y) && !ellipse(27587.933600, 22764.754700, 1273.000037, 997.352029, 130.613700, X, Y) && !ellipse(26888.030701, 22378.259003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.053700, 22627.010060, 2216.872064, 1295.992037, 322.244200, X, Y) && !ellipse(24446.347400, 21219.174000, 446.795213, 360.750410, 359.649649, X, Y) && !ellipse(17595.114868, 14561.134567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25158.796844, 28835.903564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15986.791046, 28128.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26002.520020, 27794.537354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.978320, 19735.633400, 418.955212, 418.955212, 0.000000, X, Y) && !ellipse(30718.696350, 14233.503952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17755.314026, 27881.181580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23430.140600, 27077.732800, 1209.440035, 1209.440035, 0.000000, X, Y) && !ellipse(26790.997345, 26111.623138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.099762, 25673.811462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.838928, 25418.806519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27806.816864, 25357.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.040000, 25300.540000, 1108.080032, 1108.080032, 0.000000, X, Y) && !ellipse(25440.715820, 25016.787292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27215.857788, 24643.261841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25985.195953, 24724.898682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23056.198000, 23713.328000, 1217.032035, 1217.032035, 0.000000, X, Y) && !ellipse(21066.496643, 23803.353943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26589.199188, 23008.637299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23273.815060, 22880.286000, 1290.440037, 482.600014, 91.757150, X, Y) && !ellipse(26139.323059, 22411.056580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.726000, 21301.458000, 1316.568038, 1316.568038, 0.000000, X, Y) && !ellipse(27222.479431, 21533.820297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.263977, 21209.377045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25663.470123, 21002.017929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33638.182495, 19336.150330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16872.111893, 17641.268570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.334351, 17532.501312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19143.981200, 15356.622800, 402.488012, 402.488012, 0.000000, X, Y) [Thu May 9 13:16:11 2013] Writing fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src5.gif [Thu May 9 13:19:16 2013] Mean detx,y = (1166.47, -1836.84) [Thu May 9 13:19:19 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 9 13:20:43 2013] Binned source spectrum to 10 counts/bin [Thu May 9 13:20:43 2013] Setting source spectrum file to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Thu May 9 13:20:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src5_bgd.pi.gz [Thu May 9 13:50:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 9 13:50:21 2013] rmf not generated due to insufficient counts [Thu May 9 17:09:39 2013] Updating aperture counts using extracted products [Thu May 9 17:09:39 2013] Total counts from fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 5061.00 [Thu May 9 17:09:39 2013] Total counts from fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 31768.00 [Thu May 9 17:09:39 2013] Got source and background scale factors 4396762.000000, 134432260.000000 [Thu May 9 17:09:39 2013] User source parameters: Position = (290.1, 253.2) = 13 37 1.40 -29 53 25.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 4022.0 +/- 72.1 Background aperture counts = 1039.0 Rate = 0.2 +/- 0.003 [Thu May 9 17:09:39 2013] Updating counts from extracted products [Thu May 9 17:09:39 2013] Set source signif. to 4021.99/32.23 = 124.78 [Thu May 9 17:09:47 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 9 17:09:47 2013] Using photon index=1.80, rate=0.184, arf fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src5.arf [Thu May 9 17:09:47 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 9 17:09:47 2013] Updating source flux to 4.8e-13 [Thu May 9 17:10:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 9 17:10:20 2013] xmm0110910201/analysis//spectral/fullrun_pn_xmm0110910201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete