[Thu May  9 01:14:34 2013] Detection parameters:
  Position = (143.7, 208.0) = 13 37 50.39 -29 56 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.5 +/- 11.8
  Background counts = 14.9
  Rate = 0.003 +/- 0.0004

[Thu May  9 01:14:34 2013] Off-axis axis estimate = 13.00'
[Thu May  9 06:27:28 2013] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Thu May  9 06:27:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 06:27:28 2013] Initial guess for spatial extent in simple fitting = 12.93"
[Thu May  9 06:27:28 2013] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.850
[Thu May  9 06:27:28 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 12.93"
[Thu May  9 08:23:35 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_src42.ximg exists
[Thu May  9 08:23:35 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_src42_1.ximg exists
[Thu May  9 08:23:35 2013] Fit fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_src42 appears to have run properly
[Thu May  9 08:23:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Thu May  9 08:23:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Thu May  9 08:23:36 2013] Fit fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Thu May  9 08:24:15 2013] Spatial fit model total counts = 224.884000, observed total counts = 205.000000
[Thu May  9 08:24:15 2013] Offset between fit and detection position for source 53 = 0.315021 pixels
[Thu May  9 08:24:15 2013] 226.582300 total counts/ 174.424000 bgd. counts: snr = 3.949302
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.315021 pixels
  Position = (143.7, 207.6) = 13 37 50.38 -29 56 43.2
  Extent = 7.5 (4.7-11.8)", rotation angle = 71 (47-89) degrees
  Source counts = 52.2 +/- 15.1
  Background counts = 174.4
  Rate = 0.002 +/- 0.0005
[Thu May  9 08:24:15 2013] Vigneting correction estimate = 1.000000
[Thu May  9 08:24:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 08:24:15 2013] Assessing source extent using major axis lower bound
[Thu May  9 08:24:15 2013] Source does appear to be extended
[Thu May  9 08:24:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Thu May  9 11:59:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 11:59:41 2013] Initial guess for spatial extent in simple fitting = 5.35"
[Thu May  9 11:59:41 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.751
[Thu May  9 11:59:41 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 5.35"
[Thu May  9 13:15:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src40.ximg exists
[Thu May  9 13:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src40.csv
[Thu May  9 13:15:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src40_1.ximg exists
[Thu May  9 13:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src40.csv
[Thu May  9 13:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:15:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Thu May  9 13:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Thu May  9 13:15:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Thu May  9 13:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Thu May  9 13:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:15:58 2013] Warning, spatial fit 40 centroid is now closest to src. 56
[Thu May  9 13:15:58 2013] Vigneting correction estimate = 1.000000
[Thu May  9 13:15:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 13:15:58 2013] Assessing source extent using major axis lower bound
[Thu May  9 13:15:58 2013] Source does appear to be extended
[Thu May  9 13:15:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Thu May  9 16:09:52 2013] XMMSAS src. selection expression = ellipse(12455.785200, 18016.147400, 448.551613, 193.902006, 71.203298, X, Y)
[Thu May  9 16:09:52 2013] Writing source region out to fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src53_src.reg
[Thu May  9 16:09:52 2013] Extracting stamp from image fullrun_mos2_xmm0110910201_pi300-10000_cl_sm2.00.img.gz, (118, 182) - (170, 233)
[Thu May  9 16:09:52 2013] XMMSAS bgd. selection expression = annulus(12455.785200, 18016.147400, 747.586022, 1495.172043, X, Y)
[Thu May  9 16:09:52 2013] Writing fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src53.gif
[Thu May  9 16:17:10 2013] Mean detx,y = (-14295.18, 280.62) 
[Thu May  9 16:17:10 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 16:17:15 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 16:17:15 2013] Setting source spectrum file to fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Thu May  9 16:17:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Thu May  9 17:01:14 2013] Not generating rmf since there are only 52 counts
[Thu May  9 17:01:14 2013] rmf not generated due to insufficient counts
[Thu May  9 17:09:58 2013] Updating aperture counts using extracted products
[Thu May  9 17:09:58 2013] Total counts from fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 60.00
[Thu May  9 17:09:58 2013] Total counts from fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src53_bgd.pi.gz = 353.00
[Thu May  9 17:09:58 2013] Got source and background scale factors 243928.000000, 5034168.000000
[Thu May  9 17:09:58 2013] User source parameters:
  Position = (143.7, 207.6) = 13 37 50.38 -29 56 43.2
  Extent = 7.5 (4.7-11.8)", rotation angle = 71 (47-89) degrees
  Source aperture counts = 42.9 +/- 8.8
  Background aperture counts = 17.1
  Rate = 0.001 +/- 0.0003

[Thu May  9 17:09:59 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 17:09:59 2013] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src53.arf
[Thu May  9 17:09:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 17:09:59 2013] Updating source flux to 5.6e-14
[Thu May  9 17:10:07 2013] Source 53 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 17:10:13 2013] xmm0110910201/analysis//spectral/fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete