[Thu May  9 01:14:30 2013] Detection parameters:
  Position = (281.3, 281.6) = 13 37 4.32 -29 51 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 580.7 +/- 30.5
  Background counts = 52.9
  Rate = 0.02 +/- 0.001

[Thu May  9 01:14:34 2013] Off-axis axis estimate = 1.74'
[Thu May  9 06:27:28 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Thu May  9 06:27:28 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Thu May  9 06:27:28 2013] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.949
[Thu May  9 06:27:28 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.30"
[Thu May  9 08:23:34 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_src3.ximg exists
[Thu May  9 08:23:34 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May  9 08:23:34 2013] Fit fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu May  9 08:23:35 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May  9 08:23:35 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May  9 08:23:35 2013] Fit fullrun_mos2_xmm0110910201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May  9 08:24:15 2013] Spatial fit model total counts = 1433.180000, observed total counts = 1374.000000
[Thu May  9 08:24:15 2013] Offset between fit and detection position for source 5 = 0.479790 pixels
[Thu May  9 08:24:15 2013] 1345.240000 total counts/ 1121.780000 bgd. counts: snr = 6.671845
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.479790 pixels
  Position = (280.9, 281.7) = 13 37 4.48 -29 51 21.6
  Extent = 4.7 (3.8-6.0)" x 2.6 (2.1-3.4)", rotation angle = 55 (43-71) degrees
  Source counts = 223.5 +/- 36.7
  Background counts = 1121.8
  Rate = 0.008 +/- 0.001
[Thu May  9 08:24:15 2013] Vigneting correction estimate = 1.000000
[Thu May  9 08:24:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 08:24:15 2013] Assessing source extent using major axis lower bound
[Thu May  9 08:24:15 2013] Source does appear to be extended
[Thu May  9 08:24:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Thu May  9 08:24:15 2013] Source is confused with source 31
[Thu May  9 11:59:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 11:59:41 2013] Initial guess for spatial extent in simple fitting = 3.66"
[Thu May  9 11:59:41 2013] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.833
[Thu May  9 11:59:41 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 3.66"
[Thu May  9 13:15:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src3.ximg exists
[Thu May  9 13:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src3.csv
[Thu May  9 13:15:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May  9 13:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src3.csv
[Thu May  9 13:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:15:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May  9 13:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May  9 13:15:36 2013] fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May  9 13:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May  9 13:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110910201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:15:58 2013] Warning, spatial fit 3 centroid is now closest to src. 31
[Thu May  9 13:15:58 2013] Vigneting correction estimate = 1.000000
[Thu May  9 13:15:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 13:15:58 2013] Assessing source extent using major axis lower bound
[Thu May  9 13:15:58 2013] Source does appear to be extended
[Thu May  9 13:15:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Thu May  9 16:09:51 2013] XMMSAS src. selection expression = ellipse(24385.992280, 24460.643400, 282.769808, 156.540605, 55.126300, X, Y)
[Thu May  9 16:09:51 2013] Writing source region out to fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src5_src.reg
[Thu May  9 16:09:51 2013] Extracting stamp from image fullrun_mos2_xmm0110910201_pi300-10000_cl_sm2.00.img.gz, (265, 265) - (297, 298)
[Thu May  9 16:09:51 2013] XMMSAS bgd. selection expression = annulus(24385.992280, 24460.643400, 471.283014, 942.566027, X, Y) && !ellipse(25405.392800, 23723.977200, 731.610421, 598.432017, 336.632700, X, Y) && !ellipse(23721.431800, 24849.404000, 345.688010, 345.688010, 0.000000, X, Y) && !ellipse(23643.640656, 24256.025818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.784200, 23213.482400, 495.793614, 285.902408, 22.714600, X, Y) && !ellipse(24690.608978, 24995.143494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24802.308716, 23245.232269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.945038, 24816.290100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23008.254974, 24247.038544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22572.606000, 25437.238000, 1222.512035, 1222.512035, 0.000000, X, Y)
[Thu May  9 16:09:51 2013] Writing fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src5.gif
[Thu May  9 16:12:21 2013] Mean detx,y = (-782.40, -891.05) 
[Thu May  9 16:12:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 16:12:26 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 16:12:26 2013] Setting source spectrum file to fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May  9 16:12:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May  9 17:09:54 2013] Updating aperture counts using extracted products
[Thu May  9 17:09:54 2013] Total counts from fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 329.00
[Thu May  9 17:09:54 2013] Total counts from fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 0.00
[Thu May  9 17:09:54 2013] Got source and background scale factors 121776.000000, 1748.000000
[Thu May  9 17:09:54 2013] User source parameters:
  Position = (280.9, 281.7) = 13 37 4.48 -29 51 21.6
  Extent = 4.7 (3.8-6.0)" x 2.6 (2.1-3.4)", rotation angle = 55 (43-71) degrees
  Source aperture counts = 329.0 +/- 19.2
  Background aperture counts = 0.0
  Rate = 0.01 +/- 0.0007

[Thu May  9 17:09:59 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 17:09:59 2013] Using photon index=1.80, rate=0.00763, arf fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src5.arf
[Thu May  9 17:09:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 17:09:59 2013] Updating source flux to 1.3e-13
[Thu May  9 17:10:07 2013] Flag c found in src. 5 procflags, skipping spectral fitting
[Thu May  9 17:10:13 2013] xmm0110910201/analysis//spectral/fullrun_mos2_xmm0110910201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete