[Tue Apr 10 18:26:09 2012] Detection parameters:
  Position = (294.6, 341.9) = 12 42 9.31 32 33 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.7 +/- 20.9
  Background counts = 132.4
  Rate = 0.003 +/- 0.0005

[Tue Apr 10 18:26:10 2012] Off-axis axis estimate = 3.16'
[Tue Apr 10 18:26:35 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:26:35 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Tue Apr 10 18:26:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Tue Apr 10 18:26:35 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.01"
[Tue Apr 10 18:26:36 2012] fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_src21.ximg exists
[Tue Apr 10 18:26:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_src21.csv
[Tue Apr 10 18:26:36 2012] fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Apr 10 18:26:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_src21.csv
[Tue Apr 10 18:26:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:26:37 2012] fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Apr 10 18:26:37 2012] fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Apr 10 18:26:37 2012] Fit fullrun_pn_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Apr 10 18:26:49 2012] Spatial fit model total counts = 1112.900000, observed total counts = 1108.000000
[Tue Apr 10 18:26:49 2012] Offset between fit and detection position for source 22 = 3.919476 pixels
[Tue Apr 10 18:26:49 2012] 1043.064000 total counts/ 941.230000 bgd. counts: snr = 3.319288
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.919476 pixels
  Position = (294.5, 345.8) = 12 42 9.37 32 34 8.2
  Extent = 9.5 (7.6-12.8)", rotation angle = 0
  Source counts = 101.8 +/- 32.3
  Background counts = 941.2
  Rate = 0.002 +/- 0.0008
[Tue Apr 10 18:26:49 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:26:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:26:49 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:26:49 2012] Source does appear to be extended
[Tue Apr 10 18:26:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:27:10 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Tue Apr 10 18:27:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.037
[Tue Apr 10 18:27:10 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 9.53"
[Tue Apr 10 18:27:11 2012] fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_src20.ximg exists
[Tue Apr 10 18:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_src20.csv
[Tue Apr 10 18:27:11 2012] fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Apr 10 18:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_src20.csv
[Tue Apr 10 18:27:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:11 2012] fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Apr 10 18:27:11 2012] fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Apr 10 18:27:11 2012] Fit fullrun_pn_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Apr 10 18:27:23 2012] Warning, spatial fit 20 centroid is now closest to src. 25
[Tue Apr 10 18:27:23 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:27:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:27:23 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:27:23 2012] Source does appear to be extended
[Tue Apr 10 18:27:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:42 2012] XMMSAS src. selection expression = ellipse(25570.181200, 30039.402000, 571.578616, 571.578616, 0.000000, X, Y)
[Tue Apr 10 18:27:42 2012] Not overwriting source region fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_src.reg
[Tue Apr 10 18:27:42 2012] Extracting stamp from image fullrun_pn_xmm0110900201_pi300-10000_cl_sm2.00.img.gz, (262, 313) - (327, 379)
[Tue Apr 10 18:27:42 2012] XMMSAS bgd. selection expression = annulus(25570.181200, 30039.402000, 952.631027, 1905.262055, X, Y) && !ellipse(25123.768000, 28142.198600, 328.932809, 328.932809, 0.000000, X, Y) && !ellipse(23873.287415, 28522.750824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.223000, 28382.361340, 599.478417, 599.478417, 0.000000, X, Y) && !ellipse(26894.459600, 30046.608600, 415.365612, 415.365612, 0.000000, X, Y) && !ellipse(25751.802948, 29029.651672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.451996, 28806.326538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.028351, 28809.916138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.510000, 28604.004000, 1255.600036, 1255.600036, 0.000000, X, Y) && !ellipse(27847.837067, 28141.470032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.614319, 27806.638977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28050.108000, 27714.852000, 1182.216034, 1182.216034, 0.000000, X, Y)
[Tue Apr 10 18:27:42 2012] Writing fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22.gif
[Tue Apr 10 18:27:44 2012] ../../xmm0110900201/products/events/fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0110900201/products/events/fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Tue Apr 10 18:27:44 2012] Mean detx,y = (101.19, -2416.84) 
[Tue Apr 10 18:27:44 2012] ../../xmm0110900201/products/images/fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_src.img and ../../xmm0110900201/products/images/fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Tue Apr 10 18:27:44 2012] ../../xmm0110900201/products/spectra/fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0110900201/products/spectra/fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Tue Apr 10 18:27:44 2012] Setting source spectrum file to fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Apr 10 18:27:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Apr 10 18:27:44 2012] ../../xmm0110900201/products/lightcurves/fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0110900201/products/lightcurves/fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Tue Apr 10 18:27:49 2012] fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22.rmf exists, delete to re-create
[Tue Apr 10 18:27:49 2012] fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Tue Apr 10 18:28:38 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:28:38 2012] Error reading totcts from fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Apr 10 18:28:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:28:39 2012] Using photon index=1.80, rate=0.00248, arf fullrun_pn_xmm0110900201_pi300-10000_pass1_cl_src22.arf
[Tue Apr 10 18:28:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:28:39 2012] Updating source flux to 7.4e-15