[Tue Apr 10 18:26:12 2012] Detection parameters:
  Position = (321.2, 316.0) = 12 42 0.19 32 31 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.7 +/- 20.5
  Background counts = 43.0
  Rate = 0.004 +/- 0.0004

[Tue Apr 10 18:26:12 2012] Off-axis axis estimate = 2.08'
[Tue Apr 10 18:26:39 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:26:39 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Tue Apr 10 18:26:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Tue Apr 10 18:26:39 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.47"
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src10.ximg exists
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Apr 10 18:26:39 2012] Fit fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src10 appears to have run properly
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Apr 10 18:26:39 2012] Fit fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Apr 10 18:26:58 2012] Spatial fit model total counts = 3033.430000, observed total counts = 2996.000000
[Tue Apr 10 18:26:58 2012] Offset between fit and detection position for source 30 = 2.417186 pixels
[Tue Apr 10 18:26:58 2012] Warning, changing simple spatial fit ID from 10 to 3
[Tue Apr 10 18:26:58 2012] 3414.375000 total counts/ 2495.040000 bgd. counts: snr = 18.404967
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 2.417186 pixels
  Position = (322.0, 313.8) = 12 41 59.89 32 31 48.7
  Extent = 15.5 (15.3-30.9)", rotation angle = 0
  Source counts = 919.3 +/- 58.4
  Background counts = 2495.0
  Rate = 0.02 +/- 0.001
[Tue Apr 10 18:26:58 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:26:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:26:58 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:26:58 2012] Source does appear to be extended
[Tue Apr 10 18:26:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:26:58 2012] Source is confused with source 2
[Tue Apr 10 18:27:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:27:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 18:27:13 2012] Initial guess for spatial extent in simple fitting = 15.46"
[Tue Apr 10 18:27:13 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.974
[Tue Apr 10 18:27:13 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 15.46"
[Tue Apr 10 18:27:13 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src10.ximg exists
[Tue Apr 10 18:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src10.csv
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Apr 10 18:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src10.csv
[Tue Apr 10 18:27:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Apr 10 18:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Apr 10 18:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Apr 10 18:27:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:31 2012] Spatial fit model total counts = 2961.930000, observed total counts = 2996.000000
[Tue Apr 10 18:27:31 2012] Offset between fit and detection position for source 30 = 0.279421 pixels
[Tue Apr 10 18:27:31 2012] Warning, changing simple spatial fit ID from 10 to 3
[Tue Apr 10 18:27:31 2012] 3364.720000 total counts/ 2127.250000 bgd. counts: snr = 26.830293
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.279421 pixels
  Position = (321.9, 313.5) = 12 41 59.93 32 31 47.6
  Extent = 15.5 (15.4-30.9)", rotation angle = 0
  Source counts = 1237.5 +/- 58.0
  Background counts = 2127.2
  Rate = 0.02 +/- 0.001
[Tue Apr 10 18:27:31 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:27:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:27:31 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:27:31 2012] Source does appear to be extended
[Tue Apr 10 18:27:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:52 2012] Counts = 1237.470000, rescaling region sizes by 2.000000
[Tue Apr 10 18:27:52 2012] XMMSAS src. selection expression = ellipse(27956.504000, 27228.180000, 1854.768053, 1854.768053, 0.000000, X, Y)
[Tue Apr 10 18:27:52 2012] Not overwriting source region fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_src.reg
[Tue Apr 10 18:27:52 2012] Extracting stamp from image fullrun_mos2_xmm0110900201_pi300-10000_cl_sm2.00.img.gz, (215, 207) - (428, 420)
[Tue Apr 10 18:27:52 2012] XMMSAS bgd. selection expression = annulus(27956.504000, 27228.180000, 6182.560178, 12365.120356, X, Y) && !ellipse(29036.495000, 27804.620800, 368.895211, 368.895211, 0.000000, X, Y) && !ellipse(25099.363660, 28192.429400, 410.196812, 410.196812, 0.000000, X, Y) && !ellipse(28575.803619, 27543.942413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.855540, 23701.644200, 357.630410, 357.630410, 0.000000, X, Y) && !ellipse(26381.666947, 28401.056761, 486.070113, 356.796450, 207.820128, X, Y) && !ellipse(23908.150604, 28471.668060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35476.954895, 30401.643372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23625.316320, 18206.954400, 380.490506, 380.490506, 0.000000, X, Y) && !ellipse(21381.400375, 22587.347870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.400452, 30049.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17400.320679, 21970.583237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26617.549591, 32945.259674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33179.104034, 16976.607208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18674.912100, 24629.158800, 553.476816, 197.028006, 89.195850, X, Y) && !ellipse(36372.607788, 36404.359283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34083.661896, 36875.337585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26310.458282, 27621.750702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38895.289185, 24039.757751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35584.279144, 38034.820740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30346.631000, 17251.047480, 384.397611, 384.397611, 0.000000, X, Y) && !ellipse(38606.445892, 29482.376648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25768.755310, 28227.702728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22349.183000, 28406.951600, 446.084813, 446.084813, 0.000000, X, Y) && !ellipse(26880.320496, 27688.673370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35468.825195, 20737.429657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21381.365860, 29079.884827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30698.836731, 27527.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25227.044373, 28990.697083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32959.333800, 38885.266400, 370.089611, 370.089611, 0.000000, X, Y) && !ellipse(28932.623627, 25939.911774, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 18:27:52 2012] Writing fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30.gif
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/events/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0110900201/products/events/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Tue Apr 10 18:27:53 2012] Mean detx,y = (-1688.71, -976.80) 
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/images/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_src.img and ../../xmm0110900201/products/images/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/spectra/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0110900201/products/spectra/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Tue Apr 10 18:27:53 2012] Setting source spectrum file to fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Apr 10 18:27:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/lightcurves/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0110900201/products/lightcurves/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Tue Apr 10 18:27:55 2012] fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30.rmf exists, delete to re-create
[Tue Apr 10 18:27:55 2012] fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30.arf exists, delete to re-create
[Tue Apr 10 18:28:40 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:28:40 2012] Error reading totcts from fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Apr 10 18:28:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:28:41 2012] Using photon index=1.80, rate=0.0241, arf fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src30.arf
[Tue Apr 10 18:28:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:28:41 2012] Updating source flux to 2.1e-13
[Tue Apr 10 18:28:44 2012] Flag c found in src. 30 procflags, skipping spectral fitting